From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 03/10] KVM: VMX: Handle INVVPID fallback logic in vpid_sync_vcpu_addr()
Date: Fri, 21 Feb 2020 14:26:45 +0100 [thread overview]
Message-ID: <8736b4t6ju.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20200220204356.8837-4-sean.j.christopherson@intel.com>
Sean Christopherson <sean.j.christopherson@intel.com> writes:
> Directly invoke vpid_sync_context() to do a global INVVPID when the
> individual address variant is not supported instead of deferring such
> behavior to the caller. This allows for additional consolidation of
> code as the logic is basically identical to the emulation of the
> individual address variant in handle_invvpid().
>
> No functional change intended.
>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
> arch/x86/kvm/vmx/ops.h | 12 +++++-------
> arch/x86/kvm/vmx/vmx.c | 3 +--
> 2 files changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx/ops.h b/arch/x86/kvm/vmx/ops.h
> index a2b0689e65e3..612df1bdb26b 100644
> --- a/arch/x86/kvm/vmx/ops.h
> +++ b/arch/x86/kvm/vmx/ops.h
> @@ -276,17 +276,15 @@ static inline void vpid_sync_context(int vpid)
> vpid_sync_vcpu_global();
> }
>
> -static inline bool vpid_sync_vcpu_addr(int vpid, gva_t addr)
> +static inline void vpid_sync_vcpu_addr(int vpid, gva_t addr)
> {
> if (vpid == 0)
> - return true;
> + return;
>
> - if (cpu_has_vmx_invvpid_individual_addr()) {
> + if (cpu_has_vmx_invvpid_individual_addr())
> __invvpid(VMX_VPID_EXTENT_INDIVIDUAL_ADDR, vpid, addr);
> - return true;
> - }
> -
> - return false;
> + else
> + vpid_sync_context(vpid);
> }
>
> static inline void ept_sync_global(void)
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 9a6664886f2e..349a6e054e0e 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -2826,8 +2826,7 @@ static void vmx_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t addr)
> {
> int vpid = to_vmx(vcpu)->vpid;
>
> - if (!vpid_sync_vcpu_addr(vpid, addr))
> - vpid_sync_context(vpid);
> + vpid_sync_vcpu_addr(vpid, addr);
>
> /*
> * If VPIDs are not supported or enabled, then the above is a no-op.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
--
Vitaly
next prev parent reply other threads:[~2020-02-21 13:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 20:43 [PATCH 00/10] KVM: x86: Clean up VMX's TLB flushing code Sean Christopherson
2020-02-20 20:43 ` [PATCH 01/10] KVM: VMX: Use vpid_sync_context() directly when possible Sean Christopherson
2020-02-21 13:17 ` Vitaly Kuznetsov
2020-02-21 15:36 ` Sean Christopherson
2020-02-21 17:26 ` Paolo Bonzini
2020-02-20 20:43 ` [PATCH 02/10] KVM: VMX: Move vpid_sync_vcpu_addr() down a few lines Sean Christopherson
2020-02-21 13:19 ` Vitaly Kuznetsov
2020-02-20 20:43 ` [PATCH 03/10] KVM: VMX: Handle INVVPID fallback logic in vpid_sync_vcpu_addr() Sean Christopherson
2020-02-21 13:26 ` Vitaly Kuznetsov [this message]
2020-02-20 20:43 ` [PATCH 04/10] KVM: VMX: Fold vpid_sync_vcpu_{single,global}() into vpid_sync_context() Sean Christopherson
2020-02-21 13:39 ` Vitaly Kuznetsov
2020-02-21 15:32 ` Sean Christopherson
2020-02-21 17:28 ` Paolo Bonzini
2020-02-20 20:43 ` [PATCH 05/10] KVM: nVMX: Use vpid_sync_vcpu_addr() to emulate INVVPID with address Sean Christopherson
2020-02-21 13:43 ` Vitaly Kuznetsov
2020-02-20 20:43 ` [PATCH 06/10] KVM: x86: Move "flush guest's TLB" logic to separate kvm_x86_ops hook Sean Christopherson
[not found] ` <87tv3krqta.fsf@vitty.brq.redhat.com>
2020-02-21 17:31 ` Paolo Bonzini
2020-02-21 17:32 ` Paolo Bonzini
2020-02-20 20:43 ` [PATCH 07/10] KVM: VMX: Clean up vmx_flush_tlb_gva() Sean Christopherson
2020-02-21 13:54 ` Vitaly Kuznetsov
2020-02-20 20:43 ` [PATCH 08/10] KVM: x86: Drop @invalidate_gpa param from kvm_x86_ops' tlb_flush() Sean Christopherson
2020-02-21 13:56 ` Vitaly Kuznetsov
2020-02-20 20:43 ` [PATCH 09/10] KVM: VMX: Drop @invalidate_gpa from __vmx_flush_tlb() Sean Christopherson
2020-02-20 20:43 ` [PATCH 10/10] KVM: VMX: Fold __vmx_flush_tlb() into vmx_flush_tlb() Sean Christopherson
2020-02-21 13:20 ` [PATCH 00/10] KVM: x86: Clean up VMX's TLB flushing code Paolo Bonzini
-- strict thread matches above, loose matches on Subject: below --
2020-02-21 6:56 [PATCH 03/10] KVM: VMX: Handle INVVPID fallback logic in vpid_sync_vcpu_addr() linmiaohe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8736b4t6ju.fsf@vitty.brq.redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox