From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: "Wanpeng Li" <wanpengli@tencent.com>,
"Jim Mattson" <jmattson@google.com>,
"Joerg Roedel" <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>
Subject: Re: [RESEND PATCH 04/13] KVM: x86: Drop EMULTYPE_NO_UD_ON_FAIL as a standalone type
Date: Fri, 23 Aug 2019 11:34:29 +0200 [thread overview]
Message-ID: <874l28p6my.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20190823010709.24879-5-sean.j.christopherson@intel.com>
Sean Christopherson <sean.j.christopherson@intel.com> writes:
> The "no #UD on fail" is used only in the VMWare case, and for the VMWare
> scenario it really means "#GP instead of #UD on fail". Remove the flag
> in preparation for moving all fault injection into the emulation flow
> itself, which in turn will allow eliminating EMULATE_DONE and company.
>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
> arch/x86/include/asm/kvm_host.h | 1 -
> arch/x86/kvm/svm.c | 3 +--
> arch/x86/kvm/vmx/vmx.c | 3 +--
> arch/x86/kvm/x86.c | 2 +-
> 4 files changed, 3 insertions(+), 6 deletions(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 44a5ce57a905..dd6bd9ed0839 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -1318,7 +1318,6 @@ enum emulation_result {
> #define EMULTYPE_TRAP_UD (1 << 1)
> #define EMULTYPE_SKIP (1 << 2)
> #define EMULTYPE_ALLOW_RETRY (1 << 3)
> -#define EMULTYPE_NO_UD_ON_FAIL (1 << 4)
> #define EMULTYPE_VMWARE (1 << 5)
> int kvm_emulate_instruction(struct kvm_vcpu *vcpu, int emulation_type);
> int kvm_emulate_instruction_from_buffer(struct kvm_vcpu *vcpu,
> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
> index 1f220a85514f..5a42f9c70014 100644
> --- a/arch/x86/kvm/svm.c
> +++ b/arch/x86/kvm/svm.c
> @@ -2772,8 +2772,7 @@ static int gp_interception(struct vcpu_svm *svm)
>
> WARN_ON_ONCE(!enable_vmware_backdoor);
>
> - er = kvm_emulate_instruction(vcpu,
> - EMULTYPE_VMWARE | EMULTYPE_NO_UD_ON_FAIL);
> + er = kvm_emulate_instruction(vcpu, EMULTYPE_VMWARE);
> if (er == EMULATE_USER_EXIT)
> return 0;
> else if (er != EMULATE_DONE)
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 18286e5b5983..6ecf773825e2 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -4509,8 +4509,7 @@ static int handle_exception_nmi(struct kvm_vcpu *vcpu)
>
> if (!vmx->rmode.vm86_active && is_gp_fault(intr_info)) {
> WARN_ON_ONCE(!enable_vmware_backdoor);
> - er = kvm_emulate_instruction(vcpu,
> - EMULTYPE_VMWARE | EMULTYPE_NO_UD_ON_FAIL);
> + er = kvm_emulate_instruction(vcpu, EMULTYPE_VMWARE);
> if (er == EMULATE_USER_EXIT)
> return 0;
> else if (er != EMULATE_DONE)
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index fe847f8eb947..e0f0e14d8fac 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -6210,7 +6210,7 @@ static int handle_emulation_failure(struct kvm_vcpu *vcpu, int emulation_type)
> ++vcpu->stat.insn_emulation_fail;
> trace_kvm_emulate_insn_failed(vcpu);
>
> - if (emulation_type & EMULTYPE_NO_UD_ON_FAIL)
> + if (emulation_type & EMULTYPE_VMWARE)
> return EMULATE_FAIL;
>
> kvm_queue_exception(vcpu, UD_VECTOR);
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
--
Vitaly
next prev parent reply other threads:[~2019-08-23 9:34 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 1:06 [RESEND PATCH 00/13] KVM: x86: Remove emulation_result enums Sean Christopherson
2019-08-23 1:06 ` [RESEND PATCH 01/13] KVM: x86: Relocate MMIO exit stats counting Sean Christopherson
2019-08-23 9:15 ` Vitaly Kuznetsov
2019-08-23 14:37 ` Sean Christopherson
2019-08-23 1:06 ` [RESEND PATCH 02/13] KVM: x86: Clean up handle_emulation_failure() Sean Christopherson
2019-08-23 9:23 ` Vitaly Kuznetsov
2019-08-23 12:58 ` Liran Alon
2019-08-23 1:06 ` [RESEND PATCH 03/13] KVM: x86: Refactor kvm_vcpu_do_singlestep() to remove out param Sean Christopherson
2019-08-23 9:32 ` Vitaly Kuznetsov
2019-08-23 13:05 ` Liran Alon
2019-08-23 1:07 ` [RESEND PATCH 04/13] KVM: x86: Drop EMULTYPE_NO_UD_ON_FAIL as a standalone type Sean Christopherson
2019-08-23 9:34 ` Vitaly Kuznetsov [this message]
2019-08-23 13:21 ` Liran Alon
2019-08-23 13:32 ` Liran Alon
2019-08-23 21:55 ` Sean Christopherson
2019-08-23 1:07 ` [RESEND PATCH 05/13] KVM: x86: Don't attempt VMWare emulation on #GP with non-zero error code Sean Christopherson
2019-08-23 11:51 ` Vitaly Kuznetsov
2019-08-23 13:23 ` Liran Alon
2019-08-23 1:07 ` [RESEND PATCH 06/13] KVM: x86: Move #GP injection for VMware into x86_emulate_instruction() Sean Christopherson
2019-08-23 12:27 ` Vitaly Kuznetsov
2019-08-23 13:30 ` Liran Alon
2019-08-23 1:07 ` [RESEND PATCH 07/13] KVM: x86: Add explicit flag for forced emulation on #UD Sean Christopherson
2019-08-23 13:47 ` Liran Alon
2019-08-23 14:44 ` Sean Christopherson
2019-08-23 15:31 ` Liran Alon
2019-08-23 1:07 ` [RESEND PATCH 08/13] KVM: x86: Move #UD injection for failed emulation into emulation code Sean Christopherson
2019-08-23 13:48 ` Liran Alon
2019-08-27 20:22 ` Sean Christopherson
2019-08-23 1:07 ` [RESEND PATCH 09/13] KVM: x86: Exit to userspace on emulation skip failure Sean Christopherson
2019-08-23 1:07 ` [RESEND PATCH 10/13] KVM: x86: Handle emulation failure directly in kvm_task_switch() Sean Christopherson
2019-08-23 1:07 ` [RESEND PATCH 11/13] KVM: x86: Move triple fault request into RM int injection Sean Christopherson
2019-08-23 1:07 ` [RESEND PATCH 12/13] KVM: VMX: Remove EMULATE_FAIL handling in handle_invalid_guest_state() Sean Christopherson
2019-08-23 1:07 ` [RESEND PATCH 13/13] KVM: x86: Remove emulation_result enums, EMULATE_{DONE,FAIL,USER_EXIT} Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874l28p6my.fsf@vitty.brq.redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox