From: Greg Stark <gsstark@mit.edu>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: pchdtv 3000 cx88 audio very very low level
Date: 06 Apr 2006 22:57:34 -0400 [thread overview]
Message-ID: <8764lmnlcx.fsf@stark.xeocode.com> (raw)
Is this video4linux list still active? I see very little traffic on it. Is
there a better place for questions about v4l drivers for the pchdtv 3000 cx88
NTSC tuner?
I have it working fine but the audio is extremely low level. Even if I boost
the line-in level and the master output level to max on my sound card it's
barely audible over the background static.
Is there something wrong with my card? Or with my drivers?
bash-3.1$ lsmod | grep cx
cx88_alsa 13408 0
cx8800 32268 1
compat_ioctl32 1792 1 cx8800
cx88xx 63524 2 cx88_alsa,cx8800
i2c_algo_bit 9480 1 cx88xx
video_buf 21764 3 cx88_alsa,cx8800,cx88xx
ir_common 9988 1 cx88xx
btcx_risc 5384 3 cx88_alsa,cx8800,cx88xx
v4l2_common 8064 3 cx8800,msp3400,tuner
v4l1_compat 13956 2 cx8800,ivtv
tveeprom 14992 2 cx88xx,ivtv
videodev 10368 6 cx8800,cx88xx,ivtv
snd_pcm 84484 4 cx88_alsa,snd_pcm_oss,snd_intel8x0,snd_ac97_codec
i2c_core 22400 13 cx88xx,i2c_algo_bit,msp3400,saa7127,saa7115,tda9887,tuner,ivtv,tveeprom,w83627hf,eeprom,i2c_isa,i2c_i801
snd 52576 11 cx88_alsa,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
[ 5020.495242] cx2388x v4l2 driver version 0.0.5 loaded
[ 5020.499005] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 22
[ 5020.499140] CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
[ 5020.499194] TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe
[ 5020.676748] tuner 2-0061: chip found @ 0xc2 (cx88[0])
[ 5020.679548] tuner 2-0061: type set to 52 (Thomson DTT 7610 (ATSC/NTSC))
[ 5020.720003] tda9887 2-0043: chip found @ 0x86 (cx88[0])
[ 5020.846947] cx88[0]/0: found at 0000:02:0d.0, rev: 5, irq: 22, latency: 64, mmio: 0xf2000000
[ 5020.854107] cx88[0]/0: registered device video1 [v4l2]
[ 5020.863507] cx88[0]/0: registered device vbi1
[ 5020.868332] cx88[0]/0: registered device radio1
[ 5020.873685] set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
[ 5020.873777] set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
[ 5020.873822] set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
[ 5020.873856] set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
[ 5020.873891] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
[ 5020.873933] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
[ 5020.874000] set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed]
[ 5046.024833] get_control id=0x980900 reg=0x310110 val=0x80 (mask 0xff)
[ 5046.024860] get_control id=0x980901 reg=0x310110 val=0x3f (mask 0xff00)
[ 5046.024873] get_control id=0x980902 reg=0x310114 val=0x7f (mask 0xff)
[ 5046.024885] get_control id=0x980903 reg=0x310118 val=0x80 (mask 0xff)
[ 5046.024897] get_control id=0x980906 reg=0x320598 val=0x00 (mask 0x7f) [shadowed]
[ 5046.024911] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed]
[ 5046.024920] get_control id=0x980905 reg=0x320594 val=0x1f (mask 0x3f) [shadowed]
[ 5046.024929] get_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed]
[ 5046.124609] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
[ 5046.124619] set_control id=0x980902 reg=0x310114 val=0x577c (mask 0xffff)
[ 5046.124638] set_control id=0x980900 reg=0x310110 val=0xff (mask 0xff)
[ 5046.124652] set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
[ 5046.124665] set_control id=0x980901 reg=0x310110 val=0x3800 (mask 0xff00)
[ 5046.166913] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed]
[ 5200.569119] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
[ 5200.569129] set_control id=0x980902 reg=0x310114 val=0x577c (mask 0xffff)
[ 5200.569147] set_control id=0x980900 reg=0x310110 val=0xff (mask 0xff)
[ 5200.569161] set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
[ 5200.569174] set_control id=0x980901 reg=0x310110 val=0x3800 (mask 0xff00)
[ 5200.613786] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed]
[ 5389.899723] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
[ 5389.899733] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
[ 5390.931524] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
[ 5390.931534] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed]
[ 6560.963631] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
[ 6560.963641] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
[ 6563.560136] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
[ 6563.560147] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed]
[ 6564.125801] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
[ 6564.125811] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
[ 6750.293689] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
[ 6750.293699] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed]
[ 6824.893884] cx2388x alsa driver version 0.0.5 loaded
--
greg
next reply other threads:[~2006-04-07 2:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-07 2:57 Greg Stark [this message]
2006-04-07 9:24 ` pchdtv 3000 cx88 audio very very low level Andreas Mohr
2006-04-07 13:06 ` Greg Stark
2006-04-10 13:38 ` Andreas Mohr
2006-04-10 23:55 ` Michael Krufky
2006-04-11 7:42 ` Andreas Mohr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8764lmnlcx.fsf@stark.xeocode.com \
--to=gsstark@mit.edu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox