From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Wei Liu <wei.liu@kernel.org>,
Linux on Hyper-V List <linux-hyperv@vger.kernel.org>
Cc: virtualization@lists.linux-foundation.org,
Linux Kernel List <linux-kernel@vger.kernel.org>,
Michael Kelley <mikelley@microsoft.com>,
Vineeth Pillai <viremana@linux.microsoft.com>,
Sunil Muthuswamy <sunilmut@microsoft.com>,
Nuno Das Neves <nunodasneves@linux.microsoft.com>,
Wei Liu <wei.liu@kernel.org>,
Lillian Grassin-Drake <ligrassi@microsoft.com>,
"K. Y. Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Stephen Hemminger <sthemmin@microsoft.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
"maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)"
<x86@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>,
Arnd Bergmann <arnd@arndb.de>,
"open list:GENERIC INCLUDE/ASM HEADER FILES"
<linux-arch@vger.kernel.org>
Subject: Re: [PATCH v2 07/17] x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary
Date: Thu, 12 Nov 2020 16:44:39 +0100 [thread overview]
Message-ID: <877dqqy3yw.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20201105165814.29233-8-wei.liu@kernel.org>
Wei Liu <wei.liu@kernel.org> writes:
> We will need the partition ID for executing some hypercalls later.
>
> Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
> Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> ---
> arch/x86/hyperv/hv_init.c | 26 ++++++++++++++++++++++++++
> arch/x86/include/asm/mshyperv.h | 2 ++
> include/asm-generic/hyperv-tlfs.h | 6 ++++++
> 3 files changed, 34 insertions(+)
>
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index 7a2e37f025b0..73b0fb851f76 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -30,6 +30,9 @@
> bool hv_root_partition;
> EXPORT_SYMBOL_GPL(hv_root_partition);
>
> +u64 hv_current_partition_id;
> +EXPORT_SYMBOL_GPL(hv_current_partition_id);
> +
> void *hv_hypercall_pg;
> EXPORT_SYMBOL_GPL(hv_hypercall_pg);
>
> @@ -335,6 +338,26 @@ static struct syscore_ops hv_syscore_ops = {
> .resume = hv_resume,
> };
>
> +void __init hv_get_partition_id(void)
> +{
> + struct hv_get_partition_id *output_page;
> + u16 status;
> + unsigned long flags;
> +
> + local_irq_save(flags);
> + output_page = *this_cpu_ptr(hyperv_pcpu_output_arg);
> + status = hv_do_hypercall(HVCALL_GET_PARTITION_ID, NULL, output_page) &
> + HV_HYPERCALL_RESULT_MASK;
> + if (status != HV_STATUS_SUCCESS)
> + pr_err("Failed to get partition ID: %d\n", status);
> + else
> + hv_current_partition_id = output_page->partition_id;
Nit: I'd suggest we simplify this to:
if (status != HV_STATUS_SUCCESS) {
pr_err("Failed to get partition ID: %d\n", status);
BUG();
}
hv_current_partition_id = output_page->partition_id;
and drop BUG_ON() below;
> + local_irq_restore(flags);
> +
> + /* No point in proceeding if this failed */
> + BUG_ON(status != HV_STATUS_SUCCESS);
> +}
> +
> /*
> * This function is to be invoked early in the boot sequence after the
> * hypervisor has been detected.
> @@ -430,6 +453,9 @@ void __init hyperv_init(void)
>
> register_syscore_ops(&hv_syscore_ops);
>
> + if (hv_root_partition)
> + hv_get_partition_id();
> +
We don't seem to check that the partition has AccessPartitionId
privilege. While I guess that root partitions always have it, I'd
suggest we write this as:
if (cpuid_ebx(HYPERV_CPUID_FEATURES) & HV_ACCESS_PARTITION_ID)
hv_get_partition_id();
BUG_ON(hv_root_partition && !hv_current_partition_id);
for correctness. Also, we need to make sure '0' is not a valid partition
id and use e.g. -1 otherwise.
> return;
>
> remove_cpuhp_state:
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index 62d9390f1ddf..67f5d35a73d3 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -78,6 +78,8 @@ extern void *hv_hypercall_pg;
> extern void __percpu **hyperv_pcpu_input_arg;
> extern void __percpu **hyperv_pcpu_output_arg;
>
> +extern u64 hv_current_partition_id;
> +
> static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
> {
> u64 input_address = input ? virt_to_phys(input) : 0;
> diff --git a/include/asm-generic/hyperv-tlfs.h b/include/asm-generic/hyperv-tlfs.h
> index e6903589a82a..87b1a79b19eb 100644
> --- a/include/asm-generic/hyperv-tlfs.h
> +++ b/include/asm-generic/hyperv-tlfs.h
> @@ -141,6 +141,7 @@ struct ms_hyperv_tsc_page {
> #define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX 0x0013
> #define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX 0x0014
> #define HVCALL_SEND_IPI_EX 0x0015
> +#define HVCALL_GET_PARTITION_ID 0x0046
> #define HVCALL_GET_VP_REGISTERS 0x0050
> #define HVCALL_SET_VP_REGISTERS 0x0051
> #define HVCALL_POST_MESSAGE 0x005c
> @@ -407,6 +408,11 @@ struct hv_tlb_flush_ex {
> u64 gva_list[];
> } __packed;
>
> +/* HvGetPartitionId hypercall (output only) */
> +struct hv_get_partition_id {
> + u64 partition_id;
> +} __packed;
> +
> /* HvRetargetDeviceInterrupt hypercall */
> union hv_msi_entry {
> u64 as_uint64;
--
Vitaly
next prev parent reply other threads:[~2020-11-12 15:44 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-05 16:57 [PATCH v2 00/17] Introducing Linux root partition support for Microsoft Hypervisor Wei Liu
2020-11-05 16:57 ` [PATCH v2 01/17] asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT Wei Liu
2020-11-12 15:14 ` Vitaly Kuznetsov
2020-11-05 16:57 ` [PATCH v2 02/17] x86/hyperv: detect if Linux is the root partition Wei Liu
2020-11-05 19:16 ` kernel test robot
2020-11-12 11:42 ` Wei Liu
2020-11-12 11:46 ` Wei Liu
2020-11-12 12:22 ` Wei Liu
2020-11-05 20:23 ` kernel test robot
2020-11-12 15:16 ` Vitaly Kuznetsov
2020-11-12 15:51 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 03/17] Drivers: hv: vmbus: skip VMBus initialization if Linux is root Wei Liu
2020-11-12 15:24 ` Vitaly Kuznetsov
2020-11-13 14:51 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 04/17] iommu/hyperv: don't setup IRQ remapping when running as root Wei Liu
2020-11-12 15:27 ` Vitaly Kuznetsov
2020-11-13 14:53 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 05/17] clocksource/hyperv: use MSR-based access if " Wei Liu
2020-11-12 9:56 ` Daniel Lezcano
2020-11-12 11:24 ` Wei Liu
2020-11-12 11:40 ` Daniel Lezcano
2020-11-12 11:42 ` Wei Liu
2020-11-12 15:30 ` Vitaly Kuznetsov
2020-11-12 15:52 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 06/17] x86/hyperv: allocate output arg pages if required Wei Liu
2020-11-12 15:35 ` Vitaly Kuznetsov
2020-11-13 15:05 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 07/17] x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary Wei Liu
2020-11-05 20:07 ` kernel test robot
2020-11-12 11:54 ` Wei Liu
2020-11-05 20:20 ` kernel test robot
2020-11-12 15:44 ` Vitaly Kuznetsov [this message]
2020-11-13 15:21 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 08/17] x86/hyperv: handling hypercall page setup for root Wei Liu
2020-11-12 15:51 ` Vitaly Kuznetsov
2020-11-13 15:33 ` Wei Liu
2020-11-13 16:09 ` Wei Liu
2020-11-13 16:16 ` Vitaly Kuznetsov
2020-11-05 16:58 ` [PATCH v2 09/17] x86/hyperv: provide a bunch of helper functions Wei Liu
2020-11-12 15:57 ` Vitaly Kuznetsov
2020-11-13 15:51 ` Wei Liu
2020-11-13 16:13 ` Vitaly Kuznetsov
2020-11-16 11:41 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 10/17] x86/hyperv: implement and use hv_smp_prepare_cpus Wei Liu
2020-11-12 16:44 ` Vitaly Kuznetsov
2020-11-13 15:56 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 11/17] asm-generic/hyperv: update hv_msi_entry Wei Liu
2020-11-05 16:58 ` [PATCH v2 12/17] asm-generic/hyperv: update hv_interrupt_entry Wei Liu
2020-11-05 16:58 ` [PATCH v2 13/17] asm-generic/hyperv: introduce hv_device_id and auxiliary structures Wei Liu
2020-11-05 16:58 ` [PATCH v2 14/17] asm-generic/hyperv: import data structures for mapping device interrupts Wei Liu
2020-11-05 16:58 ` [PATCH v2 15/17] x86/hyperv: implement an MSI domain for root partition Wei Liu
2020-11-12 13:50 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 16/17] x86/ioapic: export a few functions and data structures via io_apic.h Wei Liu
2020-11-12 11:39 ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 17/17] x86/hyperv: handle IO-APIC when running as root Wei Liu
2020-11-12 16:56 ` Vitaly Kuznetsov
2020-11-13 16:01 ` Wei Liu
2020-11-13 16:04 ` Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877dqqy3yw.fsf@vitty.brq.redhat.com \
--to=vkuznets@redhat.com \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=haiyangz@microsoft.com \
--cc=hpa@zytor.com \
--cc=kys@microsoft.com \
--cc=ligrassi@microsoft.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mingo@redhat.com \
--cc=nunodasneves@linux.microsoft.com \
--cc=sthemmin@microsoft.com \
--cc=sunilmut@microsoft.com \
--cc=tglx@linutronix.de \
--cc=viremana@linux.microsoft.com \
--cc=virtualization@lists.linux-foundation.org \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox