[PATCH 0/2] MIPS: Adjust SPARSEMEM Kconfigs

[PATCH 0/2] MIPS: Adjust SPARSEMEM Kconfigs

[Jiaxun Yang]

Hi,

This series adjusted some mm Kconfigs, mainly sparsemem related.

Hope it is not too late for 6.7 :-)

Thanks
- Jiaxun 

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
Jiaxun Yang (2):
      MIPS: Enable SPARSEMEM option unconditionally on 64BIT
      MIPS: generic: Set SPARSEMEM by default for 64BIT kernel

 arch/mips/Kconfig             | 14 +++++++++-----
 arch/mips/loongson2ef/Kconfig |  4 ++--
 2 files changed, 11 insertions(+), 7 deletions(-)
---
base-commit: 66f1e1ea3548378ff6387b1ce0b40955d54e86aa
change-id: 20231028-mm-82dc717e9e49

Best regards,
-- 
Jiaxun Yang <jiaxun.yang@flygoat.com>

[PATCH 1/2] MIPS: Enable SPARSEMEM option unconditionally on 64BIT

[Jiaxun Yang]

SPARSEMEM have been tested on Cavium and Loongson64 for a while
and we are confident that they are working properly on 64bit
systems.

Since it's almost certain for 64bit MIPS system to have a hole
in memory space, SPARSEMEM will be more efficent for them.

Also promote platforms marked with SPARSEMEM_ENABLE before
to SPARSEMEM_DEFAULT, as they tend to have huge holes in
address space.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/Kconfig             | 13 ++++++++-----
 arch/mips/loongson2ef/Kconfig |  4 ++--
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 76db82542519..d12e8f3c1d08 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -460,7 +460,7 @@ config MACH_LOONGSON2EF
 
 config MACH_LOONGSON64
 	bool "Loongson 64-bit family of machines"
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SPARSEMEM_DEFAULT
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
@@ -656,7 +656,7 @@ config SGI_IP22
 config SGI_IP27
 	bool "SGI IP27 (Origin200/2000)"
 	select ARCH_HAS_PHYS_TO_DMA
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SPARSEMEM_DEFAULT
 	select FW_ARC
 	select FW_ARC64
 	select ARC_CMDLINE_ONLY
@@ -923,7 +923,7 @@ config CAVIUM_OCTEON_SOC
 	select ZONE_DMA32
 	select GPIOLIB
 	select USE_OF
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SPARSEMEM_DEFAULT
 	select SYS_SUPPORTS_SMP
 	select NR_CPUS_DEFAULT_64
 	select MIPS_NR_CPU_NR_MAP_1024
@@ -2573,10 +2573,13 @@ config CPU_SUPPORTS_MSA
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
-	depends on !NUMA && !CPU_LOONGSON2EF
 
 config ARCH_SPARSEMEM_ENABLE
-	bool
+	def_bool y
+	depends on 64BIT
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool ARCH_SPARSEMEM_ENABLE
 
 config NUMA
 	bool "NUMA Support"
diff --git a/arch/mips/loongson2ef/Kconfig b/arch/mips/loongson2ef/Kconfig
index f93eb6f42238..e593294b2995 100644
--- a/arch/mips/loongson2ef/Kconfig
+++ b/arch/mips/loongson2ef/Kconfig
@@ -6,7 +6,7 @@ choice
 
 config LEMOTE_FULOONG2E
 	bool "Lemote Fuloong(2e) mini-PC"
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SPARSEMEM_DEFAULT
 	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
@@ -36,7 +36,7 @@ config LEMOTE_FULOONG2E
 
 config LEMOTE_MACH2F
 	bool "Lemote Loongson 2F family machines"
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SPARSEMEM_DEFAULT
 	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO

-- 
2.34.1

[PATCH 2/2] MIPS: generic: Set SPARSEMEM by default for 64BIT kernel

[Jiaxun Yang]

Select ARCH_SPARSEMEM_DEFAULT for 64bit generic kernel build,
as all platforms supported by 64bit generic kernel have a hole
in their address space.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d12e8f3c1d08..fad05f699efd 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -133,6 +133,7 @@ choice
 
 config MIPS_GENERIC_KERNEL
 	bool "Generic board-agnostic MIPS kernel"
+	select ARCH_SPARSEMEM_DEFAULT if 64BIT
 	select MIPS_GENERIC
 	select BOOT_RAW
 	select BUILTIN_DTB

-- 
2.34.1

Re: [PATCH 0/2] MIPS: Adjust SPARSEMEM Kconfigs

[Gregory CLEMENT]

Hello Jiaxun,

> Hi,
>
> This series adjusted some mm Kconfigs, mainly sparsemem related.

Following your feedback on my series adding support for EyeQ5[1]. I
tested those 2 patches and as expected it reduces a lot the memory
consumption, memap consumes 512 pages again while without these patches
it consumed 8672 pages.

You can add on both patches my

Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Thanks,

Gregory
>
> Hope it is not too late for 6.7 :-)
>
> Thanks
> - Jiaxun 
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
> Jiaxun Yang (2):
>       MIPS: Enable SPARSEMEM option unconditionally on 64BIT
>       MIPS: generic: Set SPARSEMEM by default for 64BIT kernel
>
>  arch/mips/Kconfig             | 14 +++++++++-----
>  arch/mips/loongson2ef/Kconfig |  4 ++--
>  2 files changed, 11 insertions(+), 7 deletions(-)
> ---
> base-commit: 66f1e1ea3548378ff6387b1ce0b40955d54e86aa
> change-id: 20231028-mm-82dc717e9e49
>
> Best regards,
> -- 
> Jiaxun Yang <jiaxun.yang@flygoat.com>
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

Re: [PATCH 1/2] MIPS: Enable SPARSEMEM option unconditionally on 64BIT

[Thomas Bogendoerfer]

On Sat, Oct 28, 2023 at 02:52:16PM +0100, Jiaxun Yang wrote:
> SPARSEMEM have been tested on Cavium and Loongson64 for a while
> and we are confident that they are working properly on 64bit
> systems.
> 
> Since it's almost certain for 64bit MIPS system to have a hole
> in memory space, SPARSEMEM will be more efficent for them.
> 
> Also promote platforms marked with SPARSEMEM_ENABLE before
> to SPARSEMEM_DEFAULT, as they tend to have huge holes in
> address space.
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
>  arch/mips/Kconfig             | 13 ++++++++-----
>  arch/mips/loongson2ef/Kconfig |  4 ++--
>  2 files changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 76db82542519..d12e8f3c1d08 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -460,7 +460,7 @@ config MACH_LOONGSON2EF
>  
>  config MACH_LOONGSON64
>  	bool "Loongson 64-bit family of machines"
> -	select ARCH_SPARSEMEM_ENABLE
> +	select ARCH_SPARSEMEM_DEFAULT
>  	select ARCH_MIGHT_HAVE_PC_PARPORT
>  	select ARCH_MIGHT_HAVE_PC_SERIO
>  	select GENERIC_ISA_DMA_SUPPORT_BROKEN
> @@ -656,7 +656,7 @@ config SGI_IP22
>  config SGI_IP27
>  	bool "SGI IP27 (Origin200/2000)"
>  	select ARCH_HAS_PHYS_TO_DMA
> -	select ARCH_SPARSEMEM_ENABLE
> +	select ARCH_SPARSEMEM_DEFAULT
>  	select FW_ARC
>  	select FW_ARC64
>  	select ARC_CMDLINE_ONLY
> @@ -923,7 +923,7 @@ config CAVIUM_OCTEON_SOC
>  	select ZONE_DMA32
>  	select GPIOLIB
>  	select USE_OF
> -	select ARCH_SPARSEMEM_ENABLE
> +	select ARCH_SPARSEMEM_DEFAULT
>  	select SYS_SUPPORTS_SMP
>  	select NR_CPUS_DEFAULT_64
>  	select MIPS_NR_CPU_NR_MAP_1024
> @@ -2573,10 +2573,13 @@ config CPU_SUPPORTS_MSA
>  
>  config ARCH_FLATMEM_ENABLE
>  	def_bool y
> -	depends on !NUMA && !CPU_LOONGSON2EF
>  
>  config ARCH_SPARSEMEM_ENABLE
> -	bool
> +	def_bool y
> +	depends on 64BIT
> +
> +config ARCH_SELECT_MEMORY_MODEL
> +	def_bool ARCH_SPARSEMEM_ENABLE

maybe I'm blind, but I don't see ARCH_SPARSEMEM_DEFAULT declared in
Kconfig for MIPS. So what I'm missing ?

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]