public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Markus Plail <linux-kernel@gitteundmarkus.de>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] SG_IO readcd and various bugs
Date: Fri, 30 May 2003 15:47:55 +0200	[thread overview]
Message-ID: <878ysopmus.fsf@gitteundmarkus.de> (raw)
In-Reply-To: <20030530130230.GD813@suse.de> (Jens Axboe's message of "Fri, 30 May 2003 15:02:30 +0200")

Hi there!

The patch makes readcd work just fine here :-) Many thanks!

Now if only writing would also work...

regards
Markus

[15:44:31]-[Fri May 30]-[~]
[plail@plailis_lfs]dvdrecord dev=/dev/hdb speed=4 -v -dummy /video-2/trailer_final_1000_dl.mov 
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone 
Limited  features: speed 
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
devname: '/dev/hdb'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'TEAC    '
Identifikation : 'DV-W50E         '
Revision       : '1.30'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD-RW sequential overwrite
Profile: DVD-RW sequential overwrite (current)
Profile: DVD-RW restricted overwrite (current)
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data    97 MB        
Total size:       97 MB = 49843 sectors
Current Secsize: 2048
Total power on  hours: 110055
WARNING: Phys disk size 49843 differs from rzone size 2298496! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 246450
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2248653
Starting to write CD/DVD at speed 2 in dummy TAO mode for single session.
Last chance to quit, starting dummy write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Starting new track at sector: 0
Track 01:    1 of   97 MB written (fifo  85%) [buf  67%]  11.5x.cdrecord-ProDVD: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 03 07 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70
Sense Key: 0x0 No Additional Sense, Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.005s timeout 100s

write track data: error after 1587200 bytes
cdrecord-ProDVD: A write error occured.
cdrecord-ProDVD: Please properly read the error message above.
Writing  time:    5.198s
Average write speed  14.3x.
Fixating...
Fixating time:    0.464s
cdrecord-ProDVD: fifo had 89 puts and 26 gets.
cdrecord-ProDVD: fifo was 0 times empty and 2 times full, min fill was 82%.
You have new mail in /var/mail/plail
[15:45:08]-[Fri May 30]-[~]
[plail@plailis_lfs]


  reply	other threads:[~2003-05-30 13:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-05-30 13:02 [PATCH] SG_IO readcd and various bugs Jens Axboe
2003-05-30 13:47 ` Markus Plail [this message]
2003-05-30 13:52   ` Markus Plail
2003-05-30 14:58     ` Jens Axboe
2003-05-30 16:57       ` Markus Plail
2003-06-01  7:50         ` uaca
2003-06-01  9:18           ` Markus Plail
2003-06-01 10:19             ` uaca
  -- strict thread matches above, loose matches on Subject: below --
2003-05-31  8:23 Douglas Gilbert
2003-05-31 10:57 ` Jens Axboe
2003-06-01  7:39   ` Douglas Gilbert
2003-06-02  7:27     ` Jens Axboe
2003-06-03  5:23       ` Douglas Gilbert
2003-06-03  5:39         ` Nick Piggin
2003-06-03  8:29         ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=878ysopmus.fsf@gitteundmarkus.de \
    --to=linux-kernel@gitteundmarkus.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox