From: Takashi Iwai <tiwai@suse.de>
To: peter.ujfalusi@linux.intel.com
Cc: Dominik Brodowski <linux@dominikbrodowski.net>,
lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz,
tiwai@suse.com, alsa-devel@alsa-project.org,
linux-sound@vger.kernel.org,
pierre-louis.bossart@linux.intel.com,
kai.vehmanen@linux.intel.com, ranjani.sridharan@linux.intel.com,
linux-kernel@vger.kernel.org, regressions@lists.linux.dev
Subject: Re: Oops in hdac_hda_dev_probe (6.7-rc7)
Date: Sun, 31 Dec 2023 11:28:58 +0100 [thread overview]
Message-ID: <87a5pqwtqt.wl-tiwai@suse.de> (raw)
In-Reply-To: <87plyovwg7.wl-tiwai@suse.de>
On Sat, 30 Dec 2023 11:03:36 +0100,
Takashi Iwai wrote:
>
> On Sat, 30 Dec 2023 08:27:43 +0100,
> Dominik Brodowski wrote:
> >
> > Am Fri, Dec 29, 2023 at 06:11:43PM +0100 schrieb Takashi Iwai:
> > > On Fri, 29 Dec 2023 16:24:18 +0100,
> > > Dominik Brodowski wrote:
> > > >
> > > > Hi Takashi,
> > > >
> > > > many thanks for your response. Your patch helps half-way: the oops goes
> > > > away, but so does the sound... With your patch, the decisive lines in dmesg
> > > > are:
> > > >
> > > > sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
> > > > sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
> > > > sof_sdw sof_sdw: ASoC: CODEC DAI intel-hdmi-hifi1 not registered
> > > > sof_sdw sof_sdw: snd_soc_register_card failed -517
> > > > sof_sdw sof_sdw: ASoC: CODEC DAI intel-hdmi-hifi1 not registered
> > > > sof_sdw sof_sdw: snd_soc_register_card failed -517
> > > > platform sof_sdw: deferred probe pending
> > > >
> > > > With a revert of the a0575b4add21, it is:
> > > >
> > > > sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
> > > > sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
> > > > sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0
> > > > sof_sdw sof_sdw: ASoC: Parent card not yet available, widget card binding deferred
> > > > sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
> > > > input: sof-soundwire HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input14
> > > > input: sof-soundwire HDMI/DP,pcm=6 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input15
> > > > input: sof-soundwire HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input16
> > > >
> > > > Maybe this helps a bit further?
> > >
> > > Thanks for quick testing.
> > > It shows at least that my guess wasn't wrong.
> > >
> > > The problem could be the initialization order in the caller side.
> > > Can the patch below work instead?
> >
> > Unfortunately, no:
> >
> > sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
> > sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
> > sof_sdw sof_sdw: ASoC: CODEC DAI intel-hdmi-hifi1 not registered
> > sof_sdw sof_sdw: snd_soc_register_card failed -517
> > sof_sdw sof_sdw: ASoC: CODEC DAI intel-hdmi-hifi1 not registered
> > sof_sdw sof_sdw: snd_soc_register_card failed -517
> > platform sof_sdw: deferred probe pending
>
> Hm, then it might be the logical failure of that commit.
> Peter?
FWIW, there was a report on bugzilla, too:
https://bugzilla.kernel.org/show_bug.cgi?id=218304
Takashi
next prev parent reply other threads:[~2023-12-31 10:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-27 7:37 Oops in hdac_hda_dev_probe (6.7-rc7) Dominik Brodowski
2023-12-29 13:11 ` Takashi Iwai
2023-12-29 15:24 ` Dominik Brodowski
2023-12-29 17:11 ` Takashi Iwai
2023-12-30 7:27 ` Dominik Brodowski
2023-12-30 10:03 ` Takashi Iwai
2023-12-31 10:28 ` Takashi Iwai [this message]
2024-01-02 9:08 ` Péter Ujfalusi
2024-01-02 9:25 ` Takashi Iwai
2024-01-03 14:36 ` Takashi Iwai
2024-01-03 16:24 ` Péter Ujfalusi
2024-01-03 18:31 ` Mark Brown
2024-01-02 17:37 ` Dominik Brodowski
-- strict thread matches above, loose matches on Subject: below --
2024-01-02 22:56 Willian Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a5pqwtqt.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=regressions@lists.linux.dev \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox