Re: [PATCH v2 06/17] x86/hyperv: allocate output arg pages if required

[Vitaly Kuznetsov <vkuznets@redhat.com>]

Wei Liu <wei.liu@kernel.org> writes:

> When Linux runs as the root partition, it will need to make hypercalls
> which return data from the hypervisor.
>
> Allocate pages for storing results when Linux runs as the root
> partition.
>
> Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
> Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> ---
> v2: Address Vitaly's comments
> ---
>  arch/x86/hyperv/hv_init.c       | 35 ++++++++++++++++++++++++++++-----
>  arch/x86/include/asm/mshyperv.h |  1 +
>  2 files changed, 31 insertions(+), 5 deletions(-)
>
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index 533fe9e887f2..7a2e37f025b0 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -45,6 +45,9 @@ EXPORT_SYMBOL_GPL(hv_vp_assist_page);
>  void  __percpu **hyperv_pcpu_input_arg;
>  EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
>  
> +void  __percpu **hyperv_pcpu_output_arg;
> +EXPORT_SYMBOL_GPL(hyperv_pcpu_output_arg);
> +
>  u32 hv_max_vp_index;
>  EXPORT_SYMBOL_GPL(hv_max_vp_index);
>  
> @@ -77,12 +80,19 @@ static int hv_cpu_init(unsigned int cpu)
>  	void **input_arg;
>  	struct page *pg;
>  
> -	input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
>  	/* hv_cpu_init() can be called with IRQs disabled from hv_resume() */
> -	pg = alloc_page(irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
> +	pg = alloc_pages(irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL, hv_root_partition ? 1 : 0);
>  	if (unlikely(!pg))
>  		return -ENOMEM;
> +
> +	input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
>  	*input_arg = page_address(pg);
> +	if (hv_root_partition) {
> +		void **output_arg;
> +
> +		output_arg = (void **)this_cpu_ptr(hyperv_pcpu_output_arg);
> +		*output_arg = page_address(pg + 1);
> +	}
>  
>  	hv_get_vp_index(msr_vp_index);
>  
> @@ -209,14 +219,23 @@ static int hv_cpu_die(unsigned int cpu)
>  	unsigned int new_cpu;
>  	unsigned long flags;
>  	void **input_arg;
> -	void *input_pg = NULL;
> +	void *pg;
>  
>  	local_irq_save(flags);
>  	input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
> -	input_pg = *input_arg;
> +	pg = *input_arg;
>  	*input_arg = NULL;
> +
> +	if (hv_root_partition) {
> +		void **output_arg;
> +
> +		output_arg = (void **)this_cpu_ptr(hyperv_pcpu_output_arg);
> +		*output_arg = NULL;
> +	}
> +
>  	local_irq_restore(flags);
> -	free_page((unsigned long)input_pg);
> +
> +	free_page((unsigned long)pg);
>  

Hm, but in case we've allocated output_arg, don't we need to do
	free_pages((unsigned long)pg, 1);

instead?

>  	if (hv_vp_assist_page && hv_vp_assist_page[cpu])
>  		wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, 0);
> @@ -350,6 +369,12 @@ void __init hyperv_init(void)
>  
>  	BUG_ON(hyperv_pcpu_input_arg == NULL);
>  
> +	/* Allocate the per-CPU state for output arg for root */
> +	if (hv_root_partition) {
> +		hyperv_pcpu_output_arg = alloc_percpu(void *);
> +		BUG_ON(hyperv_pcpu_output_arg == NULL);
> +	}
> +
>  	/* Allocate percpu VP index */
>  	hv_vp_index = kmalloc_array(num_possible_cpus(), sizeof(*hv_vp_index),
>  				    GFP_KERNEL);
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index ac2b0d110f03..62d9390f1ddf 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -76,6 +76,7 @@ static inline void hv_disable_stimer0_percpu_irq(int irq) {}
>  #if IS_ENABLED(CONFIG_HYPERV)
>  extern void *hv_hypercall_pg;
>  extern void  __percpu  **hyperv_pcpu_input_arg;
> +extern void  __percpu  **hyperv_pcpu_output_arg;
>  
>  static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
>  {

-- 
Vitaly