From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
To: Martin Dalecki <dalecki@evision-ventures.com>
Cc: linux-kernel@vger.kernel.org
Subject: HPT366 hangs up at boot
Date: Tue, 21 May 2002 02:02:16 +0900 [thread overview]
Message-ID: <87adquda7b.fsf@devron.myhome.or.jp> (raw)
Hi,
I'm using hpt366. 2.5.15 and 2.5.16 hangs up at the following message.
ATAL: Triones Technologies, Inc. HPT366 / HPT370: onboard version of chipset, pin1=1 pin2=2
ATA: Triones Technologies, Inc. HPT366 / HPT370: controller on PCI slot 00:13.0
ATA: chipset rev.: 1
ATA: non-legacy mode: IRQ probe delayed
ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
ATA: Triones Technologies, Inc. HPT366 / HPT370 (#2): controller on PCI slot 00:13.1
ATA: chipset rev.: 1
ATA: non-legacy mode: IRQ probe delayed
ide3: BM-DMA at 0xe800-0xe807, BIOS settings: hdg:pio, hdh:pio
hda: IBM-DJNA-351520, ATA DISK drive
hdb: ATAPI 44X CDROM, ATAPI CD/DVD-ROM drive
hde: WDC WD800AB-00CBA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xd400-0xd407,0xd802 on irq 18
hda: 30033360 sectors w/430KiB Cache, CHS=29795/16/63, UDMA(33)
hde: 156301488 sectors w/2048KiB Cache, CHS=155061/16/63, UDMA(66)
Partition check:
hda: [PTBL] [1869/255/63] hda1 hda2 hda3 hda4
hda4: <bsd: hda5 hda6 hda7 hda8 >
hde:
Then, I tried this and that. I don't know whether the following change
is right or not. However this works for me. Could you consider the
following?
diff -u /home/hirofumi/hpt366.c.orig /home/hirofumi/hpt366.c
--- /home/hirofumi/hpt366.c.orig Tue May 21 01:48:58 2002
+++ /home/hirofumi/hpt366.c Tue May 21 01:49:28 2002
@@ -863,7 +863,7 @@
byte ultra66 = eighty_ninty_three(drive);
int rval;
- config_chipset_for_pio(drive);
+// config_chipset_for_pio(drive);
drive->init_speed = 0;
if ((drive->type != ATA_DISK) && (speed < XFER_SW_DMA_0))
Regards.
--
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
next reply other threads:[~2002-05-20 17:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-20 17:02 OGAWA Hirofumi [this message]
2002-05-20 18:29 ` HPT366 hangs up at boot Pierre Rousselet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87adquda7b.fsf@devron.myhome.or.jp \
--to=hirofumi@mail.parknet.co.jp \
--cc=dalecki@evision-ventures.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox