From: Daniel Stodden <stodden@informatik.tu-muenchen.de>
To: linux-kernel@vger.kernel.org
Subject: [OOPS]
Date: Tue, 23 Jan 2001 13:14:16 +0000 [thread overview]
Message-ID: <87ae8isbyr.fsf@bitch.localnet> (raw)
hi all.
apart from an immediate reboot and having lost a few blocks on sda7,
that's pretty much all i can say about it:
------------------------------
ksymoops 2.3.4 on i586 2.4.0. Options used
-V (default)
-k /var/log/ksymoops/20010123074515.ksyms (specified)
-l /var/log/ksymoops/20010123074515.modules (specified)
-o /lib/modules/2.4.0/ (default)
-m /boot/System.map-2.4.0 (default)
Warning (expand_objects): object /lib/modules/2.4.0/misc/3dfx.o for module 3dfx has changed since load
Warning (compare_maps): mismatch on symbol resetmtrr_3dfx , 3dfx says cd952ba0, /lib/modules/2.4.0/misc/3dfx.o says cd952be4. Ignoring /lib/modules/2.4.0/misc/3dfx.o entry
Warning (compare_maps): mismatch on symbol setmtrr_3dfx , 3dfx says cd9529f4, /lib/modules/2.4.0/misc/3dfx.o says cd952a48. Ignoring /lib/modules/2.4.0/misc/3dfx.o entry
Jan 23 10:49:50 bitch kernel: Unable to handle kernel paging request at virtual address e28820c6
Jan 23 10:49:50 bitch kernel: c0142856
Jan 23 10:49:50 bitch kernel: *pde = 00000000
Jan 23 10:49:50 bitch kernel: Oops: 0000
Jan 23 10:49:50 bitch kernel: CPU: 0
Jan 23 10:49:50 bitch kernel: EIP: 0010:[find_inode+30/88]
Jan 23 10:49:50 bitch kernel: EFLAGS: 00013202
Jan 23 10:49:50 bitch kernel: eax: cbfc0000 ebx: e28820a6 ecx: 0000001c edx: 0003301d
Jan 23 10:49:50 bitch kernel: esi: e28820a6 edi: 00000000 ebp: cbfca6d0 esp: c534be80
Jan 23 10:49:50 bitch kernel: ds: 0018 es: 0018 ss: 0018
Jan 23 10:49:50 bitch kernel: Process X (pid: 7694, stackpage=c534b000)
Jan 23 10:49:50 bitch kernel: Stack: 0003301d 00000000 0003301d cb896800 c0142c28 cb896800 0003301d cbfca6d0
Jan 23 10:49:50 bitch kernel: 00000000 00000000 0003301d c483ccc0 c7268a00 c7268a5c cbfca6d0 c014f63f
Jan 23 10:49:50 bitch kernel: cb896800 0003301d 00000000 00000000 fffffff4 c483ccc0 c7268a00 c735e43c
Jan 23 10:49:50 bitch kernel: Call Trace: [iget4+76/216] [ext2_lookup+91/132] [real_lookup+83/196] [path_walk+576/2096] [open_namei+120/1480] [do_munmap+609/624] [filp_open+48/80]
Jan 23 10:49:50 bitch kernel: Code: 39 53 20 75 24 8b 54 24 14 39 93 8c 00 00 00 75 18 85 ff 74
Using defaults from ksymoops -t elf32-i386 -a i386
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 39 53 20 cmp %edx,0x20(%ebx)
Code; 00000003 Before first symbol
3: 75 24 jne 29 <_EIP+0x29> 00000029 Before first symbol
Code; 00000005 Before first symbol
5: 8b 54 24 14 mov 0x14(%esp,1),%edx
Code; 00000009 Before first symbol
9: 39 93 8c 00 00 00 cmp %edx,0x8c(%ebx)
Code; 0000000f Before first symbol
f: 75 18 jne 29 <_EIP+0x29> 00000029 Before first symbol
Code; 00000011 Before first symbol
11: 85 ff test %edi,%edi
Code; 00000013 Before first symbol
13: 74 00 je 15 <_EIP+0x15> 00000015 Before first symbol
3 warnings issued. Results may not be reliable.
misc proc stuff:
------------------------------
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 551.270
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr
bogomips : 1101.00
bitch[3]:/usr/local/src/linux-2.4/fs$ cat /proc/scsi/ncr53c8xx/0
Chip NCR53C810a, device id 0x1, revision id 0x12
On PCI bus 0, device 11, function 0, IRQ 10
Synchronous period factor 25, max commands per lun 32
Debug flags 0x200, verbosity level 1
bitch[3]:/usr/local/src/linux-2.4/fs$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DCAS-34330W Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DCAS-34330 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: TEAC Model: CD-R55S Rev: 1.0L
Type: CD-ROM ANSI SCSI revision: 02
bitch:/proc# cat /proc/ide/ali
Ali M15x3 Chipset.
------------------
PCI Clock: 33.
CD_ROM FIFO:No , CD_ROM DMA:Yes
FIFO Status: contains 0 Words, runs.
-------------------primary channel-------------------secondary channel---------
channel status: On On
both channels togth: Yes Yes
Channel state: error DRQ busy OK
Add. Setup Timing: 8T 1T
Command Act. Count: 8T 8T
Command Rec. Count: 16T 16T
----------------drive0-----------drive1------------drive0-----------drive1------
DMA enabled: No No Yes No
FIFO threshold: 8 Words 8 Words 8 Words 8 Words
FIFO mode: FIFO On FIFO On FIFO On FIFO On
Dt RW act. Cnt 8T 8T 3T 8T
Dt RW rec. Cnt 16T 16T 1T 16T
-----------------------------------UDMA Timings--------------------------------
UDMA: No No OK No
UDMA timings: 3.5T 3.5T 2.5T 3.5T
bitch:/proc# cat /proc/ide/hdc/model
IBM-DTLA-307030
--
___________________________________________________________________________
mailto:stodden@in.tum.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
reply other threads:[~2001-01-23 12:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ae8isbyr.fsf@bitch.localnet \
--to=stodden@informatik.tu-muenchen.de \
--cc=linux-kernel@vger.kernel.org \
--cc=stodden@in.tum.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox