Re: [PATCH] usb-audio: Rate limit usb_set_interface error reporting

[Takashi Iwai <tiwai@suse.de>]

On Fri, 21 Apr 2023 17:16:59 +0200,
Chris Down wrote:
> 
> Takashi Iwai writes:
> > Hrm, is "usb 3-7.1.4" really the USB audio device?  The previous
> > errors like "Unable to submit urb #2..." are certainly for USB audio,
> > and those are with "usb 3-7.4".
> 
> There are two USB audio devices -- 3-7.1.4 is input, 3-7.4 is output.
> 
>     % dmesg --notime | grep -e 'usb 3-7.4' -e 'usb 3-7.1.4' | grep Product: | sort | uniq
>     usb 3-7.1.4: Product: USB2.0 Microphone
>     usb 3-7.4: Product: USB Audio Device

Ah I see.  Then those are two different sound cards?

The repeated call of usb_set_interface() might be avoided by the
additional check like below.  But it's still puzzling how it happens,
because the only caller of endpoint_set_interface() you modified is
snd_usb_endpoint_prepare(), and it's called only from
snd_usb_pcm_prepare().  And, snd_usb_pcm_preapre() has the
snd_usb_lock_shutdown() call, which does the check of the
card->shutdown flag that should be set by the USB disconnection
callback...


thanks,

Takashi

-- 8< --
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -911,6 +911,9 @@ static int endpoint_set_interface(struct snd_usb_audio *chip,
 
 	if (ep->iface_ref->altset == altset)
 		return 0;
+	/* already disconnected? */
+	if (unlikely(atomic_read(&chip->shutdown)))
+		return -ENODEV;
 
 	usb_audio_dbg(chip, "Setting usb interface %d:%d for EP 0x%x\n",
 		      ep->iface, altset, ep->ep_num);