From: Thomas Gleixner <tglx@linutronix.de>
To: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Anup Patel <anup@brainfault.org>,
Sunil V L <sunilvl@ventanamicro.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Bjorn Helgaas <helgaas@kernel.org>
Subject: [Patch] PCI/MSI: Handle lack of irqdomain gracefully
Date: Sat, 14 Dec 2024 12:50:18 +0100 [thread overview]
Message-ID: <87ed2a8ow5.ffs@tglx> (raw)
In-Reply-To: <CAHVXubiNMp9chdUdvYjiQC2LMhNMMaGEiLMWZ-4RSV54jakP3g@mail.gmail.com>
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it.
Fixes: d2a463b29741 ("PCI/MSI: Reject multi-MSI early")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
---
drivers/pci/msi/irqdomain.c | 7 +++++--
drivers/pci/msi/msi.c | 4 ++++
2 files changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/pci/msi/irqdomain.c
+++ b/drivers/pci/msi/irqdomain.c
@@ -350,8 +350,11 @@ bool pci_msi_domain_supports(struct pci_
domain = dev_get_msi_domain(&pdev->dev);
- if (!domain || !irq_domain_is_hierarchy(domain))
- return mode == ALLOW_LEGACY;
+ if (!domain || !irq_domain_is_hierarchy(domain)) {
+ if (IS_ENABLED(CONFIG_PCI_MSI_ARCH_FALLBACKS))
+ return mode == ALLOW_LEGACY;
+ return false;
+ }
if (!irq_domain_is_msi_parent(domain)) {
/*
--- a/drivers/pci/msi/msi.c
+++ b/drivers/pci/msi/msi.c
@@ -433,6 +433,10 @@ int __pci_enable_msi_range(struct pci_de
if (WARN_ON_ONCE(dev->msi_enabled))
return -EINVAL;
+ /* Test for the availability of MSI support */
+ if (!pci_msi_domain_supports(dev, 0, ALLOW_LEGACY))
+ return -ENOTSUPP;
+
nvec = pci_msi_vec_count(dev);
if (nvec < 0)
return nvec;
next prev parent reply other threads:[~2024-12-14 11:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-13 11:57 [RFC PATCH] riscv: Fix PCI warning by enabling PCI_MSI_ARCH_FALLBACKS Alexandre Ghiti
2024-12-13 13:12 ` Thomas Gleixner
2024-12-13 13:51 ` Alexandre Ghiti
2024-12-14 11:50 ` Thomas Gleixner [this message]
2024-12-17 13:08 ` [tip: irq/urgent] PCI/MSI: Handle lack of irqdomain gracefully tip-bot2 for Thomas Gleixner
2025-02-03 19:16 ` [Patch] " patchwork-bot+linux-riscv
2026-03-11 11:22 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ed2a8ow5.ffs@tglx \
--to=tglx@linutronix.de \
--cc=alexghiti@rivosinc.com \
--cc=anup@brainfault.org \
--cc=helgaas@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=sunilvl@ventanamicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox