public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: patches@opensource.cirrus.com
Cc: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>,
	perex@perex.cz, tiwai@suse.com, sbinding@opensource.cirrus.com,
	james.schulman@cirrus.com, david.rhodes@cirrus.com,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	Jasper Smet <josbeir@gmail.com>
Subject: Re: [PATCH 1/1] ALSA: hda: cs35l41: Dell Fiorano add missing _DSD properties
Date: Thu, 14 Dec 2023 12:02:58 +0100	[thread overview]
Message-ID: <87fs05qc65.wl-tiwai@suse.de> (raw)
In-Reply-To: <20231212195243.10666-1-alex.vinarskis@gmail.com>

On Tue, 12 Dec 2023 20:52:43 +0100,
Aleksandrs Vinarskis wrote:
> 
> Dell XPS 9530 (2023) has two SPI connected CS35L41 amplifiers, however
> is missing _DSD properties, cs-gpios and has a firmware bug which caps SPI
> controller's speed to unusable 3051Hz. This patch adds _DSD properties and
> sets second cs-gpio. In case SPI speed bug is detected, it will not
> initialize the device to avoid hangs on wake up.
> 
> Resolution of SPI speed bug requires either a patch to `intel-lpss.c` or an
> UEFI update with corrected values from Dell. Tested with locally applied
> patch to `intel-lpss` on multiple XPS 9530 devices.
> 
> Co-developed-by: Jasper Smet <josbeir@gmail.com>
> Signed-off-by: Jasper Smet <josbeir@gmail.com>
> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>

Can Cirrus team review this?


thanks,

Takashi

> ---
>  sound/pci/hda/cs35l41_hda_property.c | 47 ++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
> index c83328971728..69446a794397 100644
> --- a/sound/pci/hda/cs35l41_hda_property.c
> +++ b/sound/pci/hda/cs35l41_hda_property.c
> @@ -7,9 +7,55 @@
>  // Author: Stefan Binding <sbinding@opensource.cirrus.com>
>  
>  #include <linux/gpio/consumer.h>
> +#include <linux/spi/spi.h>
>  #include <linux/string.h>
>  #include "cs35l41_hda_property.h"
>  
> +/*
> + * Device 10280BEB (Dell XPS 9530) doesn't have _DSD at all. Moreover, pin that is typically
> + * used for `speaker_id` is missing. SPI's cs-gpios definitions are also missing.
> + */
> +static int dell_fiorano_no_acpi(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
> +				const char *hid)
> +{
> +	struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
> +	struct spi_device *spi = to_spi_device(cs35l41->dev);
> +
> +	/*
> +	 * 10280BEB has a firmware bug, which wrongly enables clock divider for intel-lpss
> +	 * Resultant SPI clock is 100Mhz/32767=3051Hz, which leads to ~3 minute hang on boot/wake up
> +	 * Avoid initializing device if lpss was not patched/fixed UEFI was not installed
> +	 */
> +	if (spi->max_speed_hz < CS35L41_SPI_MAX_FREQ) {
> +		dev_err(cs35l41->dev, "SPI's max_speed_hz is capped at %u Hz, will not continue to avoid hanging\n",
> +			spi->max_speed_hz);
> +		return -EINVAL;
> +	}
> +
> +	dev_info(cs35l41->dev, "Adding DSD properties for %s\n", cs35l41->acpi_subsystem_id);
> +
> +	/* check SPI address to assign the index */
> +	cs35l41->index = id;
> +	cs35l41->channel_index = 0;
> +	/* 10280BEB is missing pin which is typically assigned to `spk-id-gpios` */
> +	cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, cs35l41->index, 2, -1);
> +	cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 1, GPIOD_OUT_LOW);
> +
> +	hw_cfg->spk_pos = cs35l41->index  ? 1 : 0;	// 0th L, 1st R
> +	hw_cfg->bst_type = CS35L41_EXT_BOOST;
> +	hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH;
> +	hw_cfg->gpio1.valid = true;
> +	hw_cfg->gpio2.func = CS35L41_INTERRUPT;
> +	hw_cfg->gpio2.valid = true;
> +	hw_cfg->valid = true;
> +
> +	/* Add second cs-gpio here */
> +	if (cs35l41->index)
> +		spi->cs_gpiod = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
> +
> +	return 0;
> +}
> +
>  /*
>   * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label reset won't work.
>   * And devices created by serial-multi-instantiate don't have their device struct
> @@ -92,6 +138,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
>  	{ "CLSA0100", NULL, lenovo_legion_no_acpi },
>  	{ "CLSA0101", NULL, lenovo_legion_no_acpi },
>  	{ "CSC3551", "103C89C6", hp_vision_acpi_fix },
> +	{ "CSC3551", "10280BEB", dell_fiorano_no_acpi },
>  	{}
>  };
>  
> -- 
> 2.40.1
> 

  reply	other threads:[~2023-12-14 11:03 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-12 19:52 [PATCH 1/1] ALSA: hda: cs35l41: Dell Fiorano add missing _DSD properties Aleksandrs Vinarskis
2023-12-14 11:02 ` Takashi Iwai [this message]
2023-12-14 15:39   ` Stuart Henderson
2023-12-14 15:49     ` Takashi Iwai
2023-12-14 19:36       ` Aleksandrs Vinarskis
2023-12-18 11:51       ` Andy Shevchenko
2023-12-20  7:38       ` [PATCH v2 0/2] ALSA: hda: cs35l41: Support Dell XPS 9530 (2023) Aleksandrs Vinarskis
2023-12-20  7:38         ` [PATCH v2 1/2] ALSA: hda: cs35l41: Safety-guard against capped SPI speed Aleksandrs Vinarskis
2023-12-20 13:43           ` Stefan Binding
2023-12-21 11:24             ` Aleksandrs Vinarskis
2023-12-21 15:09               ` Stefan Binding
2023-12-20  7:38         ` [PATCH v2 2/2] ALSA: hda: cs35l41: Support Dell XPS 9530 (2023) Aleksandrs Vinarskis
2023-12-20 13:47           ` Stefan Binding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87fs05qc65.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alex.vinarskis@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=david.rhodes@cirrus.com \
    --cc=james.schulman@cirrus.com \
    --cc=josbeir@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=sbinding@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox