* [PATCH] ARM: multi_v7_defconfig: Enable serial console on RPi 3
@ 2018-02-07 0:53 Tuomas Tynkkynen
2018-02-09 11:12 ` Eric Anholt
0 siblings, 1 reply; 3+ messages in thread
From: Tuomas Tynkkynen @ 2018-02-07 0:53 UTC (permalink / raw)
To: Eric Anholt, Stefan Wahren
Cc: linux-arm-kernel, Arnd Bergmann, linux-kernel, Olof Johansson,
Tuomas Tynkkynen
The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC
as the primary serial console of the board, so enable it in the
multiplatform defconfig.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
---
arch/arm/configs/multi_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index da7387689b88..f77bd01c7927 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -312,6 +312,9 @@ CONFIG_INPUT_ADXL34X=m
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_MT6577=y
--
2.16.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Enable serial console on RPi 3
2018-02-07 0:53 [PATCH] ARM: multi_v7_defconfig: Enable serial console on RPi 3 Tuomas Tynkkynen
@ 2018-02-09 11:12 ` Eric Anholt
2018-02-22 23:30 ` Eric Anholt
0 siblings, 1 reply; 3+ messages in thread
From: Eric Anholt @ 2018-02-09 11:12 UTC (permalink / raw)
To: Tuomas Tynkkynen, Stefan Wahren
Cc: linux-arm-kernel, Arnd Bergmann, linux-kernel, Olof Johansson,
Tuomas Tynkkynen
[-- Attachment #1: Type: text/plain, Size: 411 bytes --]
Tuomas Tynkkynen <tuomas@tuxera.com> writes:
> The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC
> as the primary serial console of the board, so enable it in the
> multiplatform defconfig.
>
> Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
I'm planning on putting this in -next once rc1 shows up, unless people
really want it in -fixes.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Enable serial console on RPi 3
2018-02-09 11:12 ` Eric Anholt
@ 2018-02-22 23:30 ` Eric Anholt
0 siblings, 0 replies; 3+ messages in thread
From: Eric Anholt @ 2018-02-22 23:30 UTC (permalink / raw)
To: Tuomas Tynkkynen, Stefan Wahren
Cc: linux-arm-kernel, Arnd Bergmann, linux-kernel, Olof Johansson,
Tuomas Tynkkynen
[-- Attachment #1: Type: text/plain, Size: 541 bytes --]
Eric Anholt <eric@anholt.net> writes:
> [ Unknown signature status ]
> Tuomas Tynkkynen <tuomas@tuxera.com> writes:
>
>> The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC
>> as the primary serial console of the board, so enable it in the
>> multiplatform defconfig.
>>
>> Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
>
> Reviewed-by: Eric Anholt <eric@anholt.net>
>
> I'm planning on putting this in -next once rc1 shows up, unless people
> really want it in -fixes.
Merged to bcm2835-defconfig-next. Thanks!
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-02-22 23:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-07 0:53 [PATCH] ARM: multi_v7_defconfig: Enable serial console on RPi 3 Tuomas Tynkkynen
2018-02-09 11:12 ` Eric Anholt
2018-02-22 23:30 ` Eric Anholt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).