From: Thomas Gleixner <tglx@linutronix.de>
To: Jamie Heilman <jamie@audible.transient.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, peterz@infradead.org,
stable@vger.kernel.org
Subject: Re: regression in 6.6.46; arch/x86/mm/pti.c
Date: Mon, 09 Sep 2024 08:30:34 +0200 [thread overview]
Message-ID: <87h6apcp9x.ffs@tglx> (raw)
In-Reply-To: <Zt6Bh2J5xMcCETbb@audible.transient.net>
On Mon, Sep 09 2024 at 05:03, Jamie Heilman wrote:
> 3db03fb4995e ("x86/mm: Fix pti_clone_entry_text() for i386") which got
> landed in 6.6.46, has introduced two back to back warnings on boot on
> my 32bit system (found on 6.6.50):
Right.
> Reverting that commit removes the warnings (tested against 6.6.50).
> The follow-on commit of c48b5a4cf312 ("x86/mm: Fix PTI for i386 some
> more") doesn't apply cleanly to 6.6.50, but I did try out a build of
> 6.11-rc7 and that works fine too with no warnings on boot.
See backport below.
Thanks,
tglx
---
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue Aug 6 20:48:43 2024 +0200
Subject: [PATCH 6.6.y, 6.1.y, 5.10.y] x86/mm: Fix PTI for i386 some more
commit c48b5a4cf3125adb679e28ef093f66ff81368d05 upstream.
So it turns out that we have to do two passes of
pti_clone_entry_text(), once before initcalls, such that device and
late initcalls can use user-mode-helper / modprobe and once after
free_initmem() / mark_readonly().
Now obviously mark_readonly() can cause PMD splits, and
pti_clone_pgtable() doesn't like that much.
Allow the late clone to split PMDs so that pagetables stay in sync.
[peterz: Changelog and comments]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20240806184843.GX37996@noisy.programming.kicks-ass.net
---
arch/x86/mm/pti.c | 45 +++++++++++++++++++++++++++++----------------
1 file changed, 29 insertions(+), 16 deletions(-)
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -241,7 +241,7 @@ static pmd_t *pti_user_pagetable_walk_pm
*
* Returns a pointer to a PTE on success, or NULL on failure.
*/
-static pte_t *pti_user_pagetable_walk_pte(unsigned long address)
+static pte_t *pti_user_pagetable_walk_pte(unsigned long address, bool late_text)
{
gfp_t gfp = (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO);
pmd_t *pmd;
@@ -251,10 +251,15 @@ static pte_t *pti_user_pagetable_walk_pt
if (!pmd)
return NULL;
- /* We can't do anything sensible if we hit a large mapping. */
+ /* Large PMD mapping found */
if (pmd_large(*pmd)) {
- WARN_ON(1);
- return NULL;
+ /* Clear the PMD if we hit a large mapping from the first round */
+ if (late_text) {
+ set_pmd(pmd, __pmd(0));
+ } else {
+ WARN_ON_ONCE(1);
+ return NULL;
+ }
}
if (pmd_none(*pmd)) {
@@ -283,7 +288,7 @@ static void __init pti_setup_vsyscall(vo
if (!pte || WARN_ON(level != PG_LEVEL_4K) || pte_none(*pte))
return;
- target_pte = pti_user_pagetable_walk_pte(VSYSCALL_ADDR);
+ target_pte = pti_user_pagetable_walk_pte(VSYSCALL_ADDR, false);
if (WARN_ON(!target_pte))
return;
@@ -301,7 +306,7 @@ enum pti_clone_level {
static void
pti_clone_pgtable(unsigned long start, unsigned long end,
- enum pti_clone_level level)
+ enum pti_clone_level level, bool late_text)
{
unsigned long addr;
@@ -390,7 +395,7 @@ pti_clone_pgtable(unsigned long start, u
return;
/* Allocate PTE in the user page-table */
- target_pte = pti_user_pagetable_walk_pte(addr);
+ target_pte = pti_user_pagetable_walk_pte(addr, late_text);
if (WARN_ON(!target_pte))
return;
@@ -453,7 +458,7 @@ static void __init pti_clone_user_shared
phys_addr_t pa = per_cpu_ptr_to_phys((void *)va);
pte_t *target_pte;
- target_pte = pti_user_pagetable_walk_pte(va);
+ target_pte = pti_user_pagetable_walk_pte(va, false);
if (WARN_ON(!target_pte))
return;
@@ -476,7 +481,7 @@ static void __init pti_clone_user_shared
start = CPU_ENTRY_AREA_BASE;
end = start + (PAGE_SIZE * CPU_ENTRY_AREA_PAGES);
- pti_clone_pgtable(start, end, PTI_CLONE_PMD);
+ pti_clone_pgtable(start, end, PTI_CLONE_PMD, false);
}
#endif /* CONFIG_X86_64 */
@@ -493,11 +498,11 @@ static void __init pti_setup_espfix64(vo
/*
* Clone the populated PMDs of the entry text and force it RO.
*/
-static void pti_clone_entry_text(void)
+static void pti_clone_entry_text(bool late)
{
pti_clone_pgtable((unsigned long) __entry_text_start,
(unsigned long) __entry_text_end,
- PTI_LEVEL_KERNEL_IMAGE);
+ PTI_LEVEL_KERNEL_IMAGE, late);
}
/*
@@ -572,7 +577,7 @@ static void pti_clone_kernel_text(void)
* pti_set_kernel_image_nonglobal() did to clear the
* global bit.
*/
- pti_clone_pgtable(start, end_clone, PTI_LEVEL_KERNEL_IMAGE);
+ pti_clone_pgtable(start, end_clone, PTI_LEVEL_KERNEL_IMAGE, false);
/*
* pti_clone_pgtable() will set the global bit in any PMDs
@@ -639,8 +644,15 @@ void __init pti_init(void)
/* Undo all global bits from the init pagetables in head_64.S: */
pti_set_kernel_image_nonglobal();
+
/* Replace some of the global bits just for shared entry text: */
- pti_clone_entry_text();
+ /*
+ * This is very early in boot. Device and Late initcalls can do
+ * modprobe before free_initmem() and mark_readonly(). This
+ * pti_clone_entry_text() allows those user-mode-helpers to function,
+ * but notably the text is still RW.
+ */
+ pti_clone_entry_text(false);
pti_setup_espfix64();
pti_setup_vsyscall();
}
@@ -657,10 +669,11 @@ void pti_finalize(void)
if (!boot_cpu_has(X86_FEATURE_PTI))
return;
/*
- * We need to clone everything (again) that maps parts of the
- * kernel image.
+ * This is after free_initmem() (all initcalls are done) and we've done
+ * mark_readonly(). Text is now NX which might've split some PMDs
+ * relative to the early clone.
*/
- pti_clone_entry_text();
+ pti_clone_entry_text(true);
pti_clone_kernel_text();
debug_checkwx_user();
next prev parent reply other threads:[~2024-09-09 6:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-09 5:03 regression in 6.6.46; arch/x86/mm/pti.c Jamie Heilman
2024-09-09 6:30 ` Thomas Gleixner [this message]
2024-09-09 7:28 ` Jamie Heilman
2024-09-10 7:35 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h6apcp9x.ffs@tglx \
--to=tglx@linutronix.de \
--cc=gregkh@linuxfoundation.org \
--cc=jamie@audible.transient.net \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox