From: Takashi Iwai <tiwai@suse.de>
To: Yufan <kuangfan955@gmail.com>
Cc: sbinding@opensource.cirrus.com, linux-sound@vger.kernel.org,
tiwai@suse.com, david.rhodes@cirrus.com,
rf@opensource.cirrus.com, perex@perex.cz,
patches@opensource.cirrus.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ALSA: hda: cs35l41: Fix Speakers on HP OmniBook 7 16-bh0xxx
Date: Thu, 16 Jul 2026 12:29:59 +0200 [thread overview]
Message-ID: <87ik6fut08.wl-tiwai@suse.de> (raw)
In-Reply-To: <20260716101708.86725-1-kuangfan955@gmail.com>
On Thu, 16 Jul 2026 12:17:08 +0200,
Yufan wrote:
>
> From: Yufan Kuang <kuangfan955@gmail.com>
>
> The HP OmniBook 7 Laptop 16-bh0xxx (SSID 103C8E60) has two CS35L41
> amplifiers connected via I2C with internal boost, but its _DSD
> provides cirrus,dev-index as a Package while the driver expects
> per-device scalar values, causing the probe to fail with -EINVAL,
> leaving only the left speaker working.
>
> Add the SSID to the configuration and prop-model override tables.
>
> Tested on a HP OmniBook 7 Laptop 16-bh0xxx (BIOS F.12) with
> CachyOS 7.1.3-2; speaker-test confirms both channels work correctly.
>
> Signed-off-by: Yufan Kuang <kuangfan955@gmail.com>
> Assisted-by: Copilot:DeepSeek-V4-Pro
The very same change has been already submitted (maybe multiple
times), e.g.
https://lore.kernel.org/20260709214414.8461-1-skbotnl@disroot.org
The problem is known, and it's basically an issue of the firmware.
But obviously we need to address *something* in the driver side.
Cirrus people -- do you have ideas to fix those HP laptops?
If it's not feasible in a short term, maybe it'd be better to take
those quirk additions; although they aren't 100% correct, but they do
work somehow in a certain level.
thanks,
Takashi
> ---
> sound/hda/codecs/side-codecs/cs35l41_hda_property.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/sound/hda/codecs/side-codecs/cs35l41_hda_property.c b/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
> index 416d7bf3e289..e14a87336478 100644
> --- a/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
> +++ b/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
> @@ -85,6 +85,7 @@ static const struct cs35l41_config cs35l41_config_table[] = {
> { "103C8C51", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
> { "103C8CDD", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
> { "103C8CDE", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 3900, 24 },
> + { "103C8E60", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
> { "104312AF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
> { "10431433", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
> { "10431463", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
> @@ -511,6 +512,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
> { "CSC3551", "103C8C6A", hp_i2c_int_2amp_dual_spkid },
> { "CSC3551", "103C8CDD", generic_dsd_config },
> { "CSC3551", "103C8CDE", generic_dsd_config },
> + { "CSC3551", "103C8E60", generic_dsd_config },
> { "CSC3551", "104312AF", generic_dsd_config },
> { "CSC3551", "10431433", generic_dsd_config },
> { "CSC3551", "10431463", generic_dsd_config },
> --
> 2.55.0
>
next prev parent reply other threads:[~2026-07-16 10:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-16 10:17 [PATCH] ALSA: hda: cs35l41: Fix Speakers on HP OmniBook 7 16-bh0xxx Yufan
2026-07-16 10:29 ` Takashi Iwai [this message]
2026-07-16 13:17 ` Stefan Binding (Opensource)
[not found] ` <87h6e8fk7n.wl-tiwai@suse.de>
2026-07-16 11:33 ` Yufan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ik6fut08.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=david.rhodes@cirrus.com \
--cc=kuangfan955@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=sbinding@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox