From: Michael Ellerman <mpe@ellerman.id.au>
To: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>,
Linux kernel mailing list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Fix the address of the linuxppc-dev mailing list
Date: Fri, 03 May 2024 20:52:43 +1000 [thread overview]
Message-ID: <87ikzvupz8.fsf@mail.lhotse> (raw)
In-Reply-To: <20240503121012.3ba5000b@canb.auug.org.au>
Stephen Rothwell <sfr@canb.auug.org.au> writes:
> This list was moved many years ago.
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> Documentation/ABI/testing/sysfs-devices-system-cpu | 14 +++++++-------
> .../ABI/testing/sysfs-firmware-opal-powercap | 4 ++--
> Documentation/ABI/testing/sysfs-firmware-opal-psr | 4 ++--
> .../ABI/testing/sysfs-firmware-opal-sensor-groups | 4 ++--
> .../testing/sysfs-firmware-papr-energy-scale-info | 10 +++++-----
> 5 files changed, 18 insertions(+), 18 deletions(-)
These are mostly powerpc specific files so I can take this.
cheers
> diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
> index 710d47be11e0..e7e160954e79 100644
> --- a/Documentation/ABI/testing/sysfs-devices-system-cpu
> +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
> @@ -423,7 +423,7 @@ What: /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats
> /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset
> Date: March 2016
> Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
> - Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> + Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: POWERNV CPUFreq driver's frequency throttle stats directory and
> attributes
>
> @@ -473,7 +473,7 @@ What: /sys/devices/system/cpu/cpufreq/policyX/throttle_stats
> /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset
> Date: March 2016
> Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
> - Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> + Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: POWERNV CPUFreq driver's frequency throttle stats directory and
> attributes
>
> @@ -608,7 +608,7 @@ Description: Umwait control
> What: /sys/devices/system/cpu/svm
> Date: August 2019
> Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
> - Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> + Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: Secure Virtual Machine
>
> If 1, it means the system is using the Protected Execution
> @@ -617,7 +617,7 @@ Description: Secure Virtual Machine
>
> What: /sys/devices/system/cpu/cpuX/purr
> Date: Apr 2005
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: PURR ticks for this CPU since the system boot.
>
> The Processor Utilization Resources Register (PURR) is
> @@ -628,7 +628,7 @@ Description: PURR ticks for this CPU since the system boot.
>
> What: /sys/devices/system/cpu/cpuX/spurr
> Date: Dec 2006
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: SPURR ticks for this CPU since the system boot.
>
> The Scaled Processor Utilization Resources Register
> @@ -640,7 +640,7 @@ Description: SPURR ticks for this CPU since the system boot.
>
> What: /sys/devices/system/cpu/cpuX/idle_purr
> Date: Apr 2020
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: PURR ticks for cpuX when it was idle.
>
> This sysfs interface exposes the number of PURR ticks
> @@ -648,7 +648,7 @@ Description: PURR ticks for cpuX when it was idle.
>
> What: /sys/devices/system/cpu/cpuX/idle_spurr
> Date: Apr 2020
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: SPURR ticks for cpuX when it was idle.
>
> This sysfs interface exposes the number of SPURR ticks
> diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
> index c9b66ec4f165..d2d12ee89288 100644
> --- a/Documentation/ABI/testing/sysfs-firmware-opal-powercap
> +++ b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
> @@ -1,6 +1,6 @@
> What: /sys/firmware/opal/powercap
> Date: August 2017
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: Powercap directory for Powernv (P8, P9) servers
>
> Each folder in this directory contains a
> @@ -11,7 +11,7 @@ What: /sys/firmware/opal/powercap/system-powercap
> /sys/firmware/opal/powercap/system-powercap/powercap-max
> /sys/firmware/opal/powercap/system-powercap/powercap-current
> Date: August 2017
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: System powercap directory and attributes applicable for
> Powernv (P8, P9) servers
>
> diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-psr b/Documentation/ABI/testing/sysfs-firmware-opal-psr
> index cc2ece70e365..1e55b56a0f89 100644
> --- a/Documentation/ABI/testing/sysfs-firmware-opal-psr
> +++ b/Documentation/ABI/testing/sysfs-firmware-opal-psr
> @@ -1,6 +1,6 @@
> What: /sys/firmware/opal/psr
> Date: August 2017
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: Power-Shift-Ratio directory for Powernv P9 servers
>
> Power-Shift-Ratio allows to provide hints the firmware
> @@ -10,7 +10,7 @@ Description: Power-Shift-Ratio directory for Powernv P9 servers
>
> What: /sys/firmware/opal/psr/cpu_to_gpu_X
> Date: August 2017
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: PSR sysfs attributes for Powernv P9 servers
>
> Power-Shift-Ratio between CPU and GPU for a given chip
> diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
> index 3a2dfe542e8c..fcb1fb4795b6 100644
> --- a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
> +++ b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
> @@ -1,6 +1,6 @@
> What: /sys/firmware/opal/sensor_groups
> Date: August 2017
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: Sensor groups directory for POWER9 powernv servers
>
> Each folder in this directory contains a sensor group
> @@ -11,7 +11,7 @@ Description: Sensor groups directory for POWER9 powernv servers
>
> What: /sys/firmware/opal/sensor_groups/<sensor_group_name>/clear
> Date: August 2017
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: Sysfs file to clear the min-max of all the sensors
> belonging to the group.
>
> diff --git a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
> index 141a6b371469..f5cefb81ac9d 100644
> --- a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
> +++ b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
> @@ -1,6 +1,6 @@
> What: /sys/firmware/papr/energy_scale_info
> Date: February 2022
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: Directory hosting a set of platform attributes like
> energy/frequency on Linux running as a PAPR guest.
>
> @@ -10,20 +10,20 @@ Description: Directory hosting a set of platform attributes like
>
> What: /sys/firmware/papr/energy_scale_info/<id>
> Date: February 2022
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: Energy, frequency attributes directory for POWERVM servers
>
> What: /sys/firmware/papr/energy_scale_info/<id>/desc
> Date: February 2022
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: String description of the energy attribute of <id>
>
> What: /sys/firmware/papr/energy_scale_info/<id>/value
> Date: February 2022
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: Numeric value of the energy attribute of <id>
>
> What: /sys/firmware/papr/energy_scale_info/<id>/value_desc
> Date: February 2022
> -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
> Description: String value of the energy attribute of <id>
> --
> 2.43.0
>
> --
> Cheers,
> Stephen Rothwell
next prev parent reply other threads:[~2024-05-03 10:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-03 2:10 [PATCH] Fix the address of the linuxppc-dev mailing list Stephen Rothwell
2024-05-03 10:52 ` Michael Ellerman [this message]
2024-05-08 13:39 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ikzvupz8.fsf@mail.lhotse \
--to=mpe@ellerman.id.au \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox