From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Russell King <linux@armlinux.org.uk>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Subject: Re: [PATCHv3 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs
Date: Thu, 26 Jan 2017 16:09:47 +0100 [thread overview]
Message-ID: <87inp1zwlg.fsf@free-electrons.com> (raw)
In-Reply-To: <20170106041517.9589-5-chris.packham@alliedtelesis.co.nz> (Chris Packham's message of "Fri, 6 Jan 2017 17:15:01 +1300")
Hi Chris,
On ven., janv. 06 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
> The Marvell 98DX3236, 98DX3336, 98DX4521 and variants are switch ASICs
> with integrated CPUs. They are similar to the Armada XP SoCs but have
> different I/O interfaces.
Before sending a new version I have a few remarks:
> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> new file mode 100644
> index 000000000000..4b7b2fe3b682
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> @@ -0,0 +1,254 @@
> +/*
> + * Device Tree Include file for Marvell 98dx3236 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
There are few characters missing in the licence text, have a look on:
http://git.infradead.org/linux-mvebu.git/commitdiff/24f0b6fe52d21b5c59c4e948daae2234a39a25b2?hp=7ce7d89f48834cefece7804d38fc5d85382edf77
> + *
> + * Contains definitions specific to the 98dx3236 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp.dtsi"
> +
> +/ {
> + model = "Marvell 98DX3236 SoC";
> + compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + aliases {
> + gpio0 = &gpio0;
> + gpio1 = &gpio1;
> + gpio2 = &gpio2;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "marvell,98dx3236-smp";
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "marvell,sheeva-v7";
> + reg = <0>;
> + clocks = <&cpuclk 0>;
> + clock-latency = <1000000>;
> + };
> + };
> +
> + soc {
> + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
> + MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
> + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
> +
> + /*
> + * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
The comment had been cut
> + */
> + pcie-controller {
Please use a node label here as we have done in:
http://git.infradead.org/linux-mvebu.git/commitdiff/11f7135bb9dbe7ae3bb9a125e6123d4096a7e69e?hp=e72996b80d53b9b7616c8b68304ce4c422b4ddd1
Also use an address:
http://git.infradead.org/linux-mvebu.git/commitdiff/007d05d898050ffc70fd2737896528c5069f7269
> + compatible = "marvell,armada-xp-pcie";
> + status = "disabled";
> + device_type = "pci";
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + msi-parent = <&mpic>;
> + bus-range = <0x00 0xff>;
> +
> + ranges =
> + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
> + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
> + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
> +
> + pcie@1,0 {
node label
> + device_type = "pci";
> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
> + reg = <0x0800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> + 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 58>;
> + marvell,pcie-port = <0>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 5>;
> + status = "disabled";
> + };
> + };
> +
> + internal-regs {
> + coreclk: mvebu-sar@18230 {
> + compatible = "marvell,mv98dx3236-core-clock";
> + };
> +
> + cpuclk: clock-complex@18700 {
> + compatible = "marvell,mv98dx3236-cpu-clock";
> + };
> +
> + corediv-clock@18740 {
> + status = "disabled";
> + };
> +
> + xor@60900 {
> + status = "disabled";
> + };
> +
> + crypto@90000 {
> + status = "disabled";
> + };
> +
> + xor@f0900 {
> + status = "disabled";
> + };
> +
> + xor@f0800 {
> + compatible = "marvell,orion-xor";
> + reg = <0xf0800 0x100
> + 0xf0a00 0x100>;
> + clocks = <&gateclk 22>;
> + status = "okay";
> +
> + xor10 {
> + interrupts = <51>;
> + dmacap,memcpy;
> + dmacap,xor;
> + };
> + xor11 {
> + interrupts = <52>;
> + dmacap,memcpy;
> + dmacap,xor;
> + dmacap,memset;
> + };
> + };
> +
> + gpio0: gpio@18100 {
> + compatible = "marvell,orion-gpio";
> + reg = <0x18100 0x40>;
> + ngpios = <32>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <82>, <83>, <84>, <85>;
> + };
> +
> + /* does not exist */
> + gpio1: gpio@18140 {
> + compatible = "marvell,orion-gpio";
> + reg = <0x18140 0x40>;
> + status = "disabled";
> + };
> +
> + gpio2: gpio@18180 { /* rework some properties */
> + compatible = "marvell,orion-gpio";
> + reg = <0x18180 0x40>;
> + ngpios = <1>; /* only gpio #32 */
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <87>;
> + };
> +
> + nand: nand@d0000 {
> + clocks = <&dfx_coredivclk 0>;
> + };
> + };
> +
> + dfx-registers {
node label
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
> +
> + dfx_coredivclk: corediv-clock@f8268 {
> + compatible = "marvell,mv98dx3236-corediv-clock";
> + reg = <0xf8268 0xc>;
> + #clock-cells = <1>;
> + clocks = <&mainpll>;
> + clock-output-names = "nand";
> + };
> +
> + dfx: dfx@0 {
> + compatible = "marvell,dfx-server";
> + reg = <0 0x100000>;
> + };
> + };
> +
> + switch {
node label
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
> +
> + pp0: packet-processor@0 {
> + compatible = "marvell,prestera-98dx3236";
> + reg = <0 0x4000000>;
> + interrupts = <33>, <34>, <35>;
> + dfx = <&dfx>;
> + };
> + };
> + };
> +};
> +
> +&pinctrl {
> + compatible = "marvell,98dx3236-pinctrl";
> +
> + spi0_pins: spi0-pins {
> + marvell,pins = "mpp0", "mpp1",
> + "mpp2", "mpp3";
> + marvell,function = "spi0";
> + };
> +};
> +
> +&sdio {
> + status = "disabled";
> +};
> +
> +&crypto_sram0 {
> + status = "disabled";
> +};
> +
> +&crypto_sram1 {
> + status = "disabled";
> +};
same comments for the following device tree, in general you can refer to
this series:
http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/468585.html
> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> new file mode 100644
> index 000000000000..a9b0f47f8df9
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> @@ -0,0 +1,76 @@
> +/*
> + * Device Tree Include file for Marvell 98dx3336 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Contains definitions specific to the 98dx3336 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp-98dx3236.dtsi"
> +
> +/ {
> + model = "Marvell 98DX3336 SoC";
> + compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + cpus {
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "marvell,sheeva-v7";
> + reg = <1>;
> + clocks = <&cpuclk 1>;
> + clock-latency = <1000000>;
> + };
> + };
> +
> + soc {
> + internal-regs {
Why the following node is not part of the dtsi?
Gregory
> + resume@20980 {
> + compatible = "marvell,98dx3336-resume-ctrl";
> + reg = <0x20980 0x10>;
> + };
> + };
> + };
> +};
> +
> +&pp0 {
> + compatible = "marvell,prestera-98dx3336";
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> new file mode 100644
> index 000000000000..446e6e65ec59
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * Device Tree Include file for Marvell 98dx4521 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Contains definitions specific to the 98dx4521 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp-98dx3236.dtsi"
> +
> +/ {
> + model = "Marvell 98DX4251 SoC";
> + compatible = "marvell,armadaxp-98dx4521", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + cpus {
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "marvell,sheeva-v7";
> + reg = <1>;
> + clocks = <&cpuclk 1>;
> + clock-latency = <1000000>;
> + };
> + };
> +
> + soc {
> + internal-regs {
> + resume@20980 {
> + compatible = "marvell,98dx3336-resume-ctrl";
> + reg = <0x20980 0x10>;
> + };
> + };
> + };
> +};
> +
> +&sdio {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + compatible = "marvell,98dx4251-pinctrl";
> +
> + sdio_pins: sdio-pins {
> + marvell,pins = "mpp5", "mpp6", "mpp7",
> + "mpp8", "mpp9", "mpp10";
> + marvell,function = "sd0";
> + };
> +};
> +
> +&pp0 {
> + compatible = "marvell,prestera-98dx4251";
> +};
> --
> 2.11.0.24.ge6920cf
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2017-01-26 15:10 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-05 3:36 [PATCHv2 0/5] Support for Marvell switches with integrated CPUs Chris Packham
2017-01-05 3:36 ` [PATCHv2 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
2017-01-05 13:53 ` Mark Rutland
2017-01-05 23:05 ` Chris Packham
2017-01-05 3:36 ` [PATCHv2 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
2017-01-05 4:04 ` Florian Fainelli
2017-01-05 4:46 ` Chris Packham
2017-01-05 20:49 ` Chris Packham
2017-01-05 3:36 ` [PATCHv2 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
2017-01-05 3:36 ` [PATCHv2 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
2017-01-05 4:06 ` Florian Fainelli
2017-01-05 4:34 ` Chris Packham
2017-01-05 13:58 ` Mark Rutland
2017-01-05 20:10 ` Chris Packham
2017-01-05 3:36 ` [PATCHv2 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
2017-01-05 4:07 ` [PATCHv2 0/5] Support for Marvell switches with integrated CPUs Florian Fainelli
2017-01-05 4:24 ` Chris Packham
2017-01-05 13:09 ` Andrew Lunn
2017-01-05 14:07 ` Marcin Wojtas
2017-01-05 19:46 ` Chris Packham
2017-01-05 19:52 ` Florian Fainelli
2017-01-05 14:09 ` Marcin Wojtas
2017-01-05 20:02 ` Chris Packham
2017-01-06 4:14 ` Chris Packham
2017-01-06 4:14 ` [PATCHv3 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
2017-01-09 18:39 ` Rob Herring
2017-01-06 4:14 ` [PATCHv3 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
2017-01-06 6:36 ` Stephen Boyd
2017-01-06 8:41 ` Chris Packham
2017-01-09 18:40 ` Rob Herring
2017-01-06 4:15 ` [PATCHv3 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
2017-01-09 18:41 ` Rob Herring
2017-01-11 14:44 ` Linus Walleij
2017-01-11 20:55 ` Sebastian Hesselbarth
2017-01-12 9:13 ` Chris Packham
2017-01-06 4:15 ` [PATCHv3 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
2017-01-09 18:44 ` Rob Herring
2017-01-26 15:09 ` Gregory CLEMENT [this message]
2017-01-26 20:07 ` Chris Packham
2017-01-26 20:24 ` Chris Packham
2017-01-26 22:52 ` Chris Packham
2017-01-06 4:15 ` [PATCHv3 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
2017-01-26 15:12 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87inp1zwlg.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox