public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Felipe Balbi <felipe.balbi@linux.intel.com>
To: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	sriram.dash@nxp.com, Rajesh Bhagat <rajesh.bhagat@nxp.com>
Subject: Re: [PATCH] usb: dwc3: add disable receiver detection in P3 quirk
Date: Mon, 14 Mar 2016 08:55:49 +0200	[thread overview]
Message-ID: <87io0pblai.fsf@intel.com> (raw)
In-Reply-To: <1457929793-18910-1-git-send-email-rajesh.bhagat@nxp.com>

[-- Attachment #1: Type: text/plain, Size: 2916 bytes --]


Hi,

Rajesh Bhagat <rajesh.bhagat@nxp.com> writes:
> [ text/plain ]
> Some freescale QorIQ platforms require to disable receiver detection
> in P3 for correct detection of USB devices. If GUSB3PIPECTL(DISRXDETINP3)
> is set, Core will change PHY power state to P2 and then perform receiver 
> detection. After receiver detection, Core will change PHY power state to 
> P3. Same quirk would be added in dts file in future patches. 
>
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> ---
>  drivers/usb/dwc3/core.c          |    6 ++++++
>  drivers/usb/dwc3/core.h          |    2 ++
>  drivers/usb/dwc3/platform_data.h |    1 +
>  3 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index de5e01f..b2f2b08 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -446,6 +446,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>  	if (dwc->u2ss_inp3_quirk)
>  		reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
>  
> +	if (dwc->dis_rxdet_inp3_quirk)
> +		reg |= DWC3_GUSB3PIPECTL_DISRXDETINP3;
> +
>  	if (dwc->req_p1p2p3_quirk)
>  		reg |= DWC3_GUSB3PIPECTL_REQP1P2P3;
>  
> @@ -903,6 +906,8 @@ static int dwc3_probe(struct platform_device *pdev)
>  				"snps,u2exit_lfps_quirk");
>  	dwc->u2ss_inp3_quirk = device_property_read_bool(dev,
>  				"snps,u2ss_inp3_quirk");
> +	dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev,
> +				"snps,dis_rxdet_inp3_quirk");

not documented under Documentation/devicetree/bindings/usb/dwc3.txt.

> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index e4f8b90..41cc22c 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -193,6 +193,7 @@
>  /* Global USB3 PIPE Control Register */
>  #define DWC3_GUSB3PIPECTL_PHYSOFTRST	(1 << 31)
>  #define DWC3_GUSB3PIPECTL_U2SSINP3OK	(1 << 29)
> +#define DWC3_GUSB3PIPECTL_DISRXDETINP3	(1 << 28)
>  #define DWC3_GUSB3PIPECTL_REQP1P2P3	(1 << 24)
>  #define DWC3_GUSB3PIPECTL_DEP1P2P3(n)	((n) << 19)
>  #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK	DWC3_GUSB3PIPECTL_DEP1P2P3(7)
> @@ -873,6 +874,7 @@ struct dwc3 {
>  
>  	unsigned		tx_de_emphasis_quirk:1;
>  	unsigned		tx_de_emphasis:2;
> +	unsigned		dis_rxdet_inp3_quirk:1;

_must_ be sorted alphabetically and you _must_ update the kernel doc
above this structure.

>  };
>  
>  /* -------------------------------------------------------------------------- */
> diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> index 2bb4d3a..9df1dfb 100644
> --- a/drivers/usb/dwc3/platform_data.h
> +++ b/drivers/usb/dwc3/platform_data.h
> @@ -46,6 +46,7 @@ struct dwc3_platform_data {
>  
>  	unsigned tx_de_emphasis_quirk:1;
>  	unsigned tx_de_emphasis:2;
> +	unsigned dis_rxdet_inp3_quirk:1;

likewise.

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]

  reply	other threads:[~2016-03-14  6:56 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-14  4:29 [PATCH] usb: dwc3: add disable receiver detection in P3 quirk Rajesh Bhagat
2016-03-14  6:55 ` Felipe Balbi [this message]
2016-03-14  7:00   ` Rajesh Bhagat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87io0pblai.fsf@intel.com \
    --to=felipe.balbi@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=rajesh.bhagat@nxp.com \
    --cc=sriram.dash@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox