From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Jisheng Zhang <jszhang@marvell.com>
Cc: <thomas.petazzoni@free-electrons.com>, <davem@davemloft.net>,
<arnd@arndb.de>, <linux-arm-kernel@lists.infradead.org>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net-next v2 1/2] net: mvneta: avoid getting status from rx_desc as much as possible
Date: Fri, 17 Feb 2017 14:35:21 +0100 [thread overview]
Message-ID: <87k28paqjq.fsf@free-electrons.com> (raw)
In-Reply-To: <20170217100233.2325-2-jszhang@marvell.com> (Jisheng Zhang's message of "Fri, 17 Feb 2017 18:02:32 +0800")
Hi Jisheng,
On ven., févr. 17 2017, Jisheng Zhang <jszhang@marvell.com> wrote:
> In hot code path mvneta_rx_hwbm(), the rx_desc->status is read twice.
> The rx_desc is allocated by dma_alloc_coherent, it's uncacheable if
> the device isn't cache-coherent, reading from uncached memory is
> fairly slow. So reuse the read out rx_status to avoid the second
> reading from uncached memory.
>
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> Suggested-by: Arnd Bergmann <arnd@arndb.de>
This one is OK and I didn't see a regression:
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Gregory
> ---
> drivers/net/ethernet/marvell/mvneta.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> index 61dd4462411c..06df72b8da85 100644
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -313,8 +313,8 @@
> ((addr >= txq->tso_hdrs_phys) && \
> (addr < txq->tso_hdrs_phys + txq->size * TSO_HEADER_SIZE))
>
> -#define MVNETA_RX_GET_BM_POOL_ID(rxd) \
> - (((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
> +#define MVNETA_RX_GET_BM_POOL_ID(status) \
> + (((status) & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
>
> struct mvneta_statistic {
> unsigned short offset;
> @@ -1900,7 +1900,7 @@ static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
> for (i = 0; i < rx_done; i++) {
> struct mvneta_rx_desc *rx_desc =
> mvneta_rxq_next_desc_get(rxq);
> - u8 pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_desc);
> + u8 pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_desc->status);
> struct mvneta_bm_pool *bm_pool;
>
> bm_pool = &pp->bm_priv->bm_pools[pool_id];
> @@ -2075,7 +2075,7 @@ static int mvneta_rx_hwbm(struct mvneta_port *pp, int rx_todo,
> rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE);
> data = (u8 *)(uintptr_t)rx_desc->buf_cookie;
> phys_addr = rx_desc->buf_phys_addr;
> - pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_desc);
> + pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_status);
> bm_pool = &pp->bm_priv->bm_pools[pool_id];
>
> if (!mvneta_rxq_desc_is_first_last(rx_status) ||
> --
> 2.11.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2017-02-17 13:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-17 10:02 [PATCH net-next v2 0/2] net: mvneta: improve rx performance Jisheng Zhang
2017-02-17 10:02 ` [PATCH net-next v2 1/2] net: mvneta: avoid getting status from rx_desc as much as possible Jisheng Zhang
2017-02-17 13:35 ` Gregory CLEMENT [this message]
2017-02-17 10:02 ` [PATCH net-next v2 2/2] net: mvneta: Use cacheable memory to store the rx buffer DMA address Jisheng Zhang
2017-02-17 13:30 ` Gregory CLEMENT
2017-02-17 13:55 ` Thomas Petazzoni
2017-02-17 15:20 ` Gregory CLEMENT
2017-02-17 10:09 ` [PATCH net-next v2 0/2] net: mvneta: improve rx performance Jisheng Zhang
2017-02-17 10:37 ` Gregory CLEMENT
2017-02-17 10:44 ` Jisheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k28paqjq.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox