From: Felipe Balbi <felipe.balbi@linux.intel.com>
To: robert.foss@collabora.com, mathias.nyman@intel.com,
gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
Julius Werner <jwerner@chromium.org>,
Andrew Bresticker <abrestic@chromium.org>
Cc: Robert Foss <robert.foss@collabora.com>
Subject: Re: [PACTH v3 1/2] usb: xhci: plat: Enable runtime PM
Date: Tue, 09 Aug 2016 12:19:58 +0300 [thread overview]
Message-ID: <87k2fqb8ox.fsf@linux.intel.com> (raw)
In-Reply-To: <1470689307-18070-2-git-send-email-robert.foss@collabora.com>
[-- Attachment #1: Type: text/plain, Size: 2391 bytes --]
Hi,
robert.foss@collabora.com writes:
> From: Andrew Bresticker <abrestic@chromium.org>
>
> Enable runtime PM for the xhci-plat device so that the parent device
> may implement runtime PM.
>
> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
> Tested-by: Robert Foss <robert.foss@collabora.com>
> Signed-off-by: Robert Foss <robert.foss@collabora.com>
> ---
> drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index ed56bf9..4f39d4e 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -246,6 +246,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
> if (ret)
> goto dealloc_usb2_hcd;
>
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> +
> return 0;
>
>
> @@ -274,6 +277,8 @@ static int xhci_plat_remove(struct platform_device *dev)
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> struct clk *clk = xhci->clk;
>
> + pm_runtime_disable(&dev->dev);
> +
> usb_remove_hcd(xhci->shared_hcd);
> usb_phy_shutdown(hcd->usb_phy);
>
> @@ -292,7 +297,11 @@ static int xhci_plat_suspend(struct device *dev)
> {
> struct usb_hcd *hcd = dev_get_drvdata(dev);
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> + int ret;
>
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + return ret;
you're leaving unbalanced PM usage_counter here. If pm_runtime_get*()
fails, you still have to decrement usage_counter.
> /*
> * xhci_suspend() needs `do_wakeup` to know whether host is allowed
> * to do wakeup during suspend. Since xhci_plat_suspend is currently
> @@ -301,15 +310,26 @@ static int xhci_plat_suspend(struct device *dev)
> * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
> * also applies to runtime suspend.
> */
> - return xhci_suspend(xhci, device_may_wakeup(dev));
> + ret = xhci_suspend(xhci, device_may_wakeup(dev));
> + pm_runtime_put(dev);
> +
> + return ret;
> }
>
> static int xhci_plat_resume(struct device *dev)
> {
> struct usb_hcd *hcd = dev_get_drvdata(dev);
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> + int ret;
> +
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + return ret;
ditto
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]
next prev parent reply other threads:[~2016-08-09 9:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-08 20:48 [PACTH v3 0/2] usb: xhci: plat: Enable PM, async resume/suspend robert.foss
2016-08-08 20:48 ` [PACTH v3 1/2] usb: xhci: plat: Enable runtime PM robert.foss
2016-08-09 9:19 ` Felipe Balbi [this message]
2016-08-09 15:31 ` Robert Foss
2016-08-08 20:48 ` [PACTH v3 2/2] usb: xhci: plat: Enable async suspend/resume robert.foss
-- strict thread matches above, loose matches on Subject: below --
2016-07-29 19:54 [PACTH v3 0/2] usb: xhci: plat: Enable PM, async resume/suspend robert.foss
2016-07-29 19:54 ` [PACTH v3 1/2] usb: xhci: plat: Enable runtime PM robert.foss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k2fqb8ox.fsf@linux.intel.com \
--to=felipe.balbi@linux.intel.com \
--cc=abrestic@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=jwerner@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=robert.foss@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).