Re: rage 128 mobility m/p and kernel DRI

Re: rage 128 mobility m/p and kernel DRI

[Alan Shutko]

"Barry Smoke" <bsmoke@bryant.dsc.k12.ar.us> writes:

> DRI is available for the rage 128, but it is not working on this chipset.

[...]

> Windows reports the chip as a rage mobility-p agp 1x, agp2x

That's not a Rage Mobility 128, I believe.  That's a Mach-64-based
chip.  Check /var/log/XFree86.0.log for a line like

(--) Chipset ATI Rage 128 Mobility LF (AGP) found

-- 
Alan Shutko <ats@acm.org> - In a variety of flavors!
A 'full' life in my experience is usually full only of other people's demands.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

rage 128 mobility m/p and kernel DRI

[Barry Smoke]

Is there a development kernel with DRI for the ati rage 128 mobility m/p
processor?
DRI is available for the rage 128, but it is not working on this chipset.
This seems to be the only way to get hardware acceleration working on
XFree86 4.0, without reverting back to 3
The attempted compile of this was on a debian woody dist, with x4.0
I tried the current kernel 2.4.0-test11
Windows reports the chip as a rage mobility-p agp 1x, agp2x

I am not subscribed to this list, so...
Please reply to:
barry@arhosting.com

Thanks,
Barry Smoke
Network Administrator
Bryant Public Schools

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/