From: Nathan Lynch <nathan.lynch@amd.com>
To: Mario Limonciello <mario.limonciello@amd.com>,
Vinod Koul <vkoul@kernel.org>
Cc: Wei Huang <wei.huang2@amd.com>,
Bjorn Helgaas <bhelgaas@google.com>, <linux-pci@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <dmaengine@vger.kernel.org>
Subject: Re: [PATCH RFC 10/13] dmaengine: sdxi: Add PCI driver support
Date: Wed, 10 Sep 2025 10:25:39 -0500 [thread overview]
Message-ID: <87o6ri49e4.fsf@AUSNATLYNCH.amd.com> (raw)
In-Reply-To: <4720dc80-4c30-4f0c-bbac-4e94285dc23a@amd.com>
Mario Limonciello <mario.limonciello@amd.com> writes:
> On 9/5/2025 1:48 PM, Nathan Lynch via B4 Relay wrote:
>> +static int sdxi_pci_map(struct sdxi_dev *sdxi)
>> +{
>> + struct pci_dev *pdev = sdxi_to_pci_dev(sdxi);
>> + int bars, ret;
>> +
>> + bars = 1 << MMIO_CTL_REGS_BAR | 1 << MMIO_DOORBELL_BAR;
>> + ret = pcim_iomap_regions(pdev, bars, SDXI_DRV_NAME);
>> + if (ret) {
>> + sdxi_err(sdxi, "pcim_iomap_regions failed (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + sdxi->dbs_bar = pci_resource_start(pdev, MMIO_DOORBELL_BAR);
>> +
>> + /* FIXME: pcim_iomap_table may return NULL, and it's deprecated. */
>> + sdxi->ctrl_regs = pcim_iomap_table(pdev)[MMIO_CTL_REGS_BAR];
>> + sdxi->dbs = pcim_iomap_table(pdev)[MMIO_DOORBELL_BAR];
>> + if (!sdxi->ctrl_regs || !sdxi->dbs) {
>> + sdxi_err(sdxi, "pcim_iomap_table failed\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void sdxi_pci_unmap(struct sdxi_dev *sdxi)
>> +{
>> + struct pci_dev *pdev = sdxi_to_pci_dev(sdxi);
>> +
>> + pcim_iounmap(pdev, sdxi->ctrl_regs);
>> + pcim_iounmap(pdev, sdxi->dbs);
>> +}
>> +
>> +static int sdxi_pci_init(struct sdxi_dev *sdxi)
>> +{
>> + struct pci_dev *pdev = sdxi_to_pci_dev(sdxi);
>> + struct device *dev = &pdev->dev;
>> + int dma_bits = 64;
>> + int ret;
>> +
>> + ret = pcim_enable_device(pdev);
>> + if (ret) {
>> + sdxi_err(sdxi, "pcim_enbale_device failed\n");
>> + return ret;
>> + }
>> +
>> + pci_set_master(pdev);
>
> Does pci_set_master() need to come before dma_set_mask_and_coherent()
> and sdxi_pci_map()?
Yes, I think so. I'll audit this code for conformance to the
initialization sequence described in Documentation/pci/pci.rst.
>
> If so; there should be an error handling path that does
> pci_clear_master().
Right.
>
>> + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(dma_bits));
>> + if (ret) {
>> + sdxi_err(sdxi, "failed to set DMA mask & coherent bits\n");
>> + return ret;
>> + }
>> +
>> + ret = sdxi_pci_map(sdxi);
>> + if (ret) {
>> + sdxi_err(sdxi, "failed to map device IO resources\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void sdxi_pci_exit(struct sdxi_dev *sdxi)
>> +{
>> + sdxi_pci_unmap(sdxi);
>
> I think you need a pci_clear_master() here.
OK, will fix.
next prev parent reply other threads:[~2025-09-10 15:25 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-05 18:48 [PATCH RFC 00/13] dmaengine: Smart Data Accelerator Interface (SDXI) basic support Nathan Lynch via B4 Relay
2025-09-05 18:48 ` [PATCH RFC 01/13] PCI: Add SNIA SDXI accelerator sub-class Nathan Lynch via B4 Relay
2025-09-15 17:25 ` Bjorn Helgaas
2025-09-15 20:17 ` Nathan Lynch
2025-09-05 18:48 ` [PATCH RFC 02/13] dmaengine: sdxi: Add control structure definitions Nathan Lynch via B4 Relay
2025-09-05 18:48 ` [PATCH RFC 03/13] dmaengine: sdxi: Add descriptor encoding and unit tests Nathan Lynch via B4 Relay
2025-09-15 11:52 ` Jonathan Cameron
2025-09-15 19:30 ` Nathan Lynch
2025-09-16 14:20 ` Jonathan Cameron
2025-09-16 19:06 ` Nathan Lynch
2025-09-05 18:48 ` [PATCH RFC 04/13] dmaengine: sdxi: Add MMIO register definitions Nathan Lynch via B4 Relay
2025-09-05 18:48 ` [PATCH RFC 05/13] dmaengine: sdxi: Add software data structures Nathan Lynch via B4 Relay
2025-09-15 11:59 ` Jonathan Cameron
2025-09-16 19:07 ` Nathan Lynch
2025-09-16 9:38 ` Markus Elfring
2025-09-05 18:48 ` [PATCH RFC 06/13] dmaengine: sdxi: Add error reporting support Nathan Lynch via B4 Relay
2025-09-15 12:11 ` Jonathan Cameron
2025-09-15 20:42 ` Nathan Lynch
2025-09-16 14:23 ` Jonathan Cameron
2025-09-05 18:48 ` [PATCH RFC 07/13] dmaengine: sdxi: Import descriptor enqueue code from spec Nathan Lynch via B4 Relay
2025-09-15 12:18 ` Jonathan Cameron
2025-09-16 17:05 ` [External] : " ALOK TIWARI
2025-09-05 18:48 ` [PATCH RFC 08/13] dmaengine: sdxi: Context creation/removal, descriptor submission Nathan Lynch via B4 Relay
2025-09-15 14:12 ` Jonathan Cameron
2025-09-16 20:40 ` Nathan Lynch
2025-09-17 13:34 ` Jonathan Cameron
2025-09-15 19:42 ` Markus Elfring
2025-09-05 18:48 ` [PATCH RFC 09/13] dmaengine: sdxi: Add core device management code Nathan Lynch via B4 Relay
2025-09-15 14:23 ` Jonathan Cameron
2025-09-16 21:23 ` Nathan Lynch
2025-09-05 18:48 ` [PATCH RFC 10/13] dmaengine: sdxi: Add PCI driver support Nathan Lynch via B4 Relay
2025-09-05 19:14 ` Mario Limonciello
2025-09-10 15:25 ` Nathan Lynch [this message]
2025-09-05 20:05 ` Bjorn Helgaas
2025-09-10 15:28 ` Nathan Lynch
2025-09-15 15:03 ` Jonathan Cameron
2025-09-16 16:43 ` [External] : " ALOK TIWARI
2025-09-05 18:48 ` [PATCH RFC 11/13] dmaengine: sdxi: Add DMA engine provider Nathan Lynch via B4 Relay
2025-09-15 15:16 ` Jonathan Cameron
2025-09-05 18:48 ` [PATCH RFC 12/13] dmaengine: sdxi: Add Kconfig and Makefile Nathan Lynch via B4 Relay
2025-09-15 15:08 ` Jonathan Cameron
2025-09-15 16:44 ` Nathan Lynch
2025-09-05 18:48 ` [PATCH RFC 13/13] MAINTAINERS: Add entry for SDXI driver Nathan Lynch via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o6ri49e4.fsf@AUSNATLYNCH.amd.com \
--to=nathan.lynch@amd.com \
--cc=bhelgaas@google.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=vkoul@kernel.org \
--cc=wei.huang2@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox