public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@deeprootsystems.com>
To: srinath@mistralsolutions.com
Cc: linux-omap@vger.kernel.org, jdk@ti.com, tony@atomide.com,
	linux-kernel@vger.kernel.org, linux@arm.linux.org.uk,
	linux-arm-kernel@lists.infradead.org, nm@ti.com,
	nagendra@mistralsolutions.com, umeshk@mistralsolutions.com,
	sshtylyov@mvista.com
Subject: Re: [Patch v2] AM35xx: Craneboard: Add USB EHCI support
Date: Mon, 22 Nov 2010 09:56:21 -0800	[thread overview]
Message-ID: <87oc9hutru.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1290414736-21973-1-git-send-email-srinath@mistralsolutions.com> (srinath@mistralsolutions.com's message of "Mon, 22 Nov 2010 14:02:16 +0530")

srinath@mistralsolutions.com writes:

> From: Srinath <srinath@mistralsolutions.com>
>
> AM3517/05 Craneboard has one EHCI interface on board using port1.
>
> GPIO35 is used as power enable.
> GPIO38 is used as port1 PHY reset.
>
> Signed-off-by: Srinath <srinath@mistralsolutions.com>
> ---
>  arch/arm/mach-omap2/board-am3517crane.c |   20 ++++++++++++++++++++
>  1 files changed, 20 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
> index 13ead33..91791bc 100644
> --- a/arch/arm/mach-omap2/board-am3517crane.c
> +++ b/arch/arm/mach-omap2/board-am3517crane.c
> @@ -28,8 +28,10 @@
>  
>  #include <plat/board.h>
>  #include <plat/common.h>
> +#include <plat/usb.h>
>  
>  #include "mux.h"
> +#include "control.h"
>  
>  /* Board initialization */
>  static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
> @@ -53,10 +55,28 @@ static void __init am3517_crane_init_irq(void)
>  	omap_gpio_init();
>  }
>>  
> +static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
> +	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
> +	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> +	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> +
> +	.phy_reset  = true,
> +	.reset_gpio_port[0]  = 38,
> +	.reset_gpio_port[1]  = -EINVAL,
> +	.reset_gpio_port[2]  = -EINVAL
> +};
> +
>  static void __init am3517_crane_init(void)
>  {
>  	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
>  	omap_serial_init();
> +
> +	/* Configure GPIO for EHCI port */
> +	omap_mux_init_gpio(35, OMAP_PIN_OUTPUT);

Please define a symbolic constant for these GPIO numbers instead of using
hard-coded constants.

> +	gpio_request(35, "usb_ehci_enable");

GPIO APIs can fail.  Please check return value and act accordingly.

> +	gpio_direction_output(35, 1);
> +	omap_mux_init_gpio(38, OMAP_PIN_OUTPUT);
> +	usb_ehci_init(&ehci_pdata);
>  }
>  
>  MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")

Kevin

  reply	other threads:[~2010-11-22 17:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <[PATCH] AM35xx-Craneboard-Add-USB-EHCI-support>
2010-11-19 16:07 ` [Patch v1] AM35xx: Craneboard: Add USB EHCI support srinath
2010-11-19 16:59   ` Igor Grinberg
2010-11-20 11:39   ` Sergei Shtylyov
2010-11-22  8:55     ` Srinath R
2010-11-22  8:32 ` [Patch v2] " srinath
2010-11-22 17:56   ` Kevin Hilman [this message]
2010-12-16 15:25 ` [Patch v4] " srinath
2010-12-17  6:22   ` Felipe Balbi
2010-12-17 12:45   ` Sergei Shtylyov
2010-12-20 13:08 ` [Patch v5] " srinath
2010-12-21  6:58   ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87oc9hutru.fsf@deeprootsystems.com \
    --to=khilman@deeprootsystems.com \
    --cc=jdk@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=nagendra@mistralsolutions.com \
    --cc=nm@ti.com \
    --cc=srinath@mistralsolutions.com \
    --cc=sshtylyov@mvista.com \
    --cc=tony@atomide.com \
    --cc=umeshk@mistralsolutions.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox