From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: "Wanpeng Li" <wanpengli@tencent.com>,
"Jim Mattson" <jmattson@google.com>,
"Joerg Roedel" <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
"Reto Buerki" <reet@codelabs.ch>,
"Liran Alon" <liran.alon@oracle.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>
Subject: Re: [PATCH v2 3/8] KVM: VMX: Consolidate to_vmx() usage in RFLAGS accessors
Date: Mon, 30 Sep 2019 10:48:27 +0200 [thread overview]
Message-ID: <87pnji41b8.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20190927214523.3376-4-sean.j.christopherson@intel.com>
Sean Christopherson <sean.j.christopherson@intel.com> writes:
> Capture struct vcpu_vmx in a local variable to improve the readability
> of vmx_{g,s}et_rflags().
>
> No functional change intended.
>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
> arch/x86/kvm/vmx/vmx.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 0b8dd9c315f8..83fe8b02b732 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -1407,35 +1407,37 @@ static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
>
> unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
> {
> + struct vcpu_vmx *vmx = to_vmx(vcpu);
> unsigned long rflags, save_rflags;
>
> if (!test_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail)) {
> __set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
> rflags = vmcs_readl(GUEST_RFLAGS);
> - if (to_vmx(vcpu)->rmode.vm86_active) {
> + if (vmx->rmode.vm86_active) {
> rflags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
> - save_rflags = to_vmx(vcpu)->rmode.save_rflags;
> + save_rflags = vmx->rmode.save_rflags;
> rflags |= save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
> }
> - to_vmx(vcpu)->rflags = rflags;
> + vmx->rflags = rflags;
> }
> - return to_vmx(vcpu)->rflags;
> + return vmx->rflags;
> }
>
> void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
> {
> + struct vcpu_vmx *vmx = to_vmx(vcpu);
> unsigned long old_rflags = vmx_get_rflags(vcpu);
>
> __set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
> - to_vmx(vcpu)->rflags = rflags;
> - if (to_vmx(vcpu)->rmode.vm86_active) {
> - to_vmx(vcpu)->rmode.save_rflags = rflags;
> + vmx->rflags = rflags;
> + if (vmx->rmode.vm86_active) {
> + vmx->rmode.save_rflags = rflags;
> rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
> }
> vmcs_writel(GUEST_RFLAGS, rflags);
>
> - if ((old_rflags ^ to_vmx(vcpu)->rflags) & X86_EFLAGS_VM)
> - to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
> + if ((old_rflags ^ vmx->rflags) & X86_EFLAGS_VM)
> + vmx->emulation_required = emulation_required(vcpu);
> }
>
> u32 vmx_get_interrupt_shadow(struct kvm_vcpu *vcpu)
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
--
Vitaly
next prev parent reply other threads:[~2019-09-30 8:48 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-27 21:45 [PATCH v2 0/8] KVM: x86: nVMX GUEST_CR3 bug fix, and then some Sean Christopherson
2019-09-27 21:45 ` [PATCH v2 1/8] KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter Sean Christopherson
2019-09-27 23:37 ` Jim Mattson
2019-09-27 21:45 ` [PATCH v2 2/8] KVM: VMX: Skip GUEST_CR3 VMREAD+VMWRITE if the VMCS is up-to-date Sean Christopherson
2019-09-27 21:45 ` [PATCH v2 3/8] KVM: VMX: Consolidate to_vmx() usage in RFLAGS accessors Sean Christopherson
2019-09-30 8:48 ` Vitaly Kuznetsov [this message]
2019-09-27 21:45 ` [PATCH v2 4/8] KVM: VMX: Optimize vmx_set_rflags() for unrestricted guest Sean Christopherson
2019-09-30 8:57 ` Vitaly Kuznetsov
2019-09-30 15:19 ` Sean Christopherson
2019-09-30 15:55 ` Vitaly Kuznetsov
2019-10-09 10:40 ` Paolo Bonzini
2019-10-09 16:38 ` Sean Christopherson
2019-10-09 20:59 ` Paolo Bonzini
2019-10-09 21:30 ` Sean Christopherson
2019-09-27 21:45 ` [PATCH v2 5/8] KVM: x86: Add WARNs to detect out-of-bounds register indices Sean Christopherson
2019-09-30 9:19 ` Vitaly Kuznetsov
2019-10-09 10:50 ` Paolo Bonzini
2019-10-09 16:36 ` Sean Christopherson
2019-09-27 21:45 ` [PATCH v2 6/8] KVM: x86: Fold 'enum kvm_ex_reg' definitions into 'enum kvm_reg' Sean Christopherson
2019-09-30 9:25 ` Vitaly Kuznetsov
2019-10-09 10:52 ` Paolo Bonzini
2019-10-09 11:27 ` Vitaly Kuznetsov
2019-09-27 21:45 ` [PATCH v2 7/8] KVM: x86: Add helpers to test/mark reg availability and dirtiness Sean Christopherson
2019-09-30 9:32 ` Vitaly Kuznetsov
2019-10-09 11:00 ` Paolo Bonzini
2019-09-27 21:45 ` [PATCH v2 8/8] KVM: x86: Fold decache_cr3() into cache_reg() Sean Christopherson
2019-09-30 10:58 ` Vitaly Kuznetsov
2019-09-30 15:04 ` Sean Christopherson
2019-09-30 15:27 ` Vitaly Kuznetsov
2019-09-30 15:33 ` Sean Christopherson
2019-10-09 11:03 ` Paolo Bonzini
2019-09-30 10:42 ` [PATCH v2 0/8] KVM: x86: nVMX GUEST_CR3 bug fix, and then some Reto Buerki
2019-10-29 15:03 ` Martin Lucina
2019-10-30 9:09 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87pnji41b8.fsf@vitty.brq.redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liran.alon@oracle.com \
--cc=pbonzini@redhat.com \
--cc=reet@codelabs.ch \
--cc=rkrcmar@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).