From: Luis Henriques <luis@igalia.com>
To: Bernd Schubert <bschubert@ddn.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>,
Dave Chinner <david@fromorbit.com>,
Alexander Viro <viro@zeniv.linux.org.uk>,
Christian Brauner <brauner@kernel.org>, Jan Kara <jack@suse.cz>,
Matt Harvey <mharvey@jumptrading.com>,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 2/2] fuse: add new function to invalidate cache for all inodes
Date: Mon, 17 Feb 2025 10:07:22 +0000 [thread overview]
Message-ID: <87r03wx4th.fsf@igalia.com> (raw)
In-Reply-To: <3fac8c84-2c41-461d-92f1-255903fc62a9@ddn.com> (Bernd Schubert's message of "Mon, 17 Feb 2025 01:40:06 +0100")
On Mon, Feb 17 2025, Bernd Schubert wrote:
> On 2/16/25 17:50, Luis Henriques wrote:
>> Currently userspace is able to notify the kernel to invalidate the cache
>> for an inode. This means that, if all the inodes in a filesystem need to
>> be invalidated, then userspace needs to iterate through all of them and do
>> this kernel notification separately.
>>
>> This patch adds a new option that allows userspace to invalidate all the
>> inodes with a single notification operation. In addition to invalidate
>> all the inodes, it also shrinks the sb dcache.
>>
>> Signed-off-by: Luis Henriques <luis@igalia.com>
>> ---
>> fs/fuse/inode.c | 33 +++++++++++++++++++++++++++++++++
>> include/uapi/linux/fuse.h | 3 +++
>> 2 files changed, 36 insertions(+)
>>
>> diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
>> index e9db2cb8c150..01a4dc5677ae 100644
>> --- a/fs/fuse/inode.c
>> +++ b/fs/fuse/inode.c
>> @@ -547,6 +547,36 @@ struct inode *fuse_ilookup(struct fuse_conn *fc, u64 nodeid,
>> return NULL;
>> }
>>
>> +static int fuse_reverse_inval_all(struct fuse_conn *fc)
>> +{
>> + struct fuse_mount *fm;
>> + struct inode *inode;
>> +
>> + inode = fuse_ilookup(fc, FUSE_ROOT_ID, &fm);
>> + if (!inode || !fm)
>> + return -ENOENT;
>> +
>> + /* Remove all possible active references to cached inodes */
>> + shrink_dcache_sb(fm->sb);
>> +
>> + /* Remove all unreferenced inodes from cache */
>> + invalidate_inodes(fm->sb);
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Notify to invalidate inodes cache. It can be called with @nodeid set to
>> + * either:
>> + *
>> + * - An inode number - Any pending writebacks within the rage [@offset @len]
>> + * will be triggered and the inode will be validated. To invalidate the whole
>> + * cache @offset has to be set to '0' and @len needs to be <= '0'; if @offset
>> + * is negative, only the inode attributes are invalidated.
>> + *
>> + * - FUSE_INVAL_ALL_INODES - All the inodes in the superblock are invalidated
>> + * and the whole dcache is shrinked.
>> + */
>> int fuse_reverse_inval_inode(struct fuse_conn *fc, u64 nodeid,
>> loff_t offset, loff_t len)
>> {
>> @@ -555,6 +585,9 @@ int fuse_reverse_inval_inode(struct fuse_conn *fc, u64 nodeid,
>> pgoff_t pg_start;
>> pgoff_t pg_end;
>>
>> + if (nodeid == FUSE_INVAL_ALL_INODES)
>> + return fuse_reverse_inval_all(fc);
>> +
>> inode = fuse_ilookup(fc, nodeid, NULL);
>> if (!inode)
>> return -ENOENT;
>> diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
>> index 5e0eb41d967e..e5852b63f99f 100644
>> --- a/include/uapi/linux/fuse.h
>> +++ b/include/uapi/linux/fuse.h
>> @@ -669,6 +669,9 @@ enum fuse_notify_code {
>> FUSE_NOTIFY_CODE_MAX,
>> };
>>
>> +/* The nodeid to request to invalidate all inodes */
>> +#define FUSE_INVAL_ALL_INODES 0
>> +
>> /* The read buffer is required to be at least 8k, but may be much larger */
>> #define FUSE_MIN_READ_BUFFER 8192
>>
>
>
> I think this version might end up in
>
> static void fuse_evict_inode(struct inode *inode)
> {
> struct fuse_inode *fi = get_fuse_inode(inode);
>
> /* Will write inode on close/munmap and in all other dirtiers */
> WARN_ON(inode->i_state & I_DIRTY_INODE);
>
>
> if the fuse connection has writeback cache enabled.
>
>
> Without having it tested, reproducer would probably be to run
> something like passthrough_hp (without --direct-io), opening
> and writing to a file and then sending FUSE_INVAL_ALL_INODES.
Thanks, Bernd. So far I couldn't trigger this warning. But I just found
that there's a stupid bug in the code: a missing iput() after doing the
fuse_ilookup().
I'll spend some more time trying to understand how (or if) the warning you
mentioned can triggered before sending a new revision.
Cheers,
--
Luís
next prev parent reply other threads:[~2025-02-17 10:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-16 16:50 [PATCH v5 0/2] fuse: allow notify_inval for all inodes Luis Henriques
2025-02-16 16:50 ` [PATCH v5 1/2] vfs: export invalidate_inodes() Luis Henriques
2025-02-18 11:59 ` Jan Kara
2025-02-18 13:35 ` Luis Henriques
2025-02-16 16:50 ` [PATCH v5 2/2] fuse: add new function to invalidate cache for all inodes Luis Henriques
2025-02-17 0:40 ` Bernd Schubert
2025-02-17 10:07 ` Luis Henriques [this message]
2025-02-17 10:29 ` Bernd Schubert
2025-02-17 11:47 ` Luis Henriques
2025-02-18 11:57 ` Jan Kara
2025-02-18 13:28 ` Luis Henriques
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r03wx4th.fsf@igalia.com \
--to=luis@igalia.com \
--cc=brauner@kernel.org \
--cc=bschubert@ddn.com \
--cc=david@fromorbit.com \
--cc=jack@suse.cz \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mharvey@jumptrading.com \
--cc=miklos@szeredi.hu \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox