public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Michael Holzheu <holzheu@linux.vnet.ibm.com>,
	Vivek Goyal <vgoyal@redhat.com>,
	xen-devel@lists.xenproject.org, linux-kernel@vger.kernel.org
Subject: Re: [Xen-devel] [PATCH] mmap_vmcore: skip non-ram pages reported by hypervisors
Date: Wed, 09 Jul 2014 11:23:26 +0200	[thread overview]
Message-ID: <87r41uopgx.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20140708162930.GC9727@laptop.dumpdata.com> (Konrad Rzeszutek Wilk's message of "Tue, 8 Jul 2014 12:29:30 -0400")

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> writes:

> On Mon, Jul 07, 2014 at 05:05:49PM +0200, Vitaly Kuznetsov wrote:
>> we have a special check in read_vmcore() handler to check if the page was
>> reported as ram or not by the hypervisor (pfn_is_ram()). However, when
>> vmcore is read with mmap() no such check is performed. That can lead to
>> unpredictable results, e.g. when running Xen PVHVM guest memcpy() after
>> mmap() on /proc/vmcore will hang processing HVMMEM_mmio_dm pages creating
>> enormous load in both DomU and Dom0.
>> 
>> Fix the issue by mapping each non-ram page to the zero page. Keep direct
>> path with remap_oldmem_pfn_range() to avoid looping through all pages on
>> bare metal.
>> 
>> The issue can also be solved by overriding remap_oldmem_pfn_range() in
>> xen-specific code, as remap_oldmem_pfn_range() was been designed for.
>> That, however, would involve non-obvious xen code path for all x86 builds
>> with CONFIG_XEN_PVHVM=y and would prevent all other hypervisor-specific
>> code on x86 arch from doing the same override.
>
> Could the 'remap_oldmem_pfn_range' become an function ops? I see there
> is an 'register_oldmem_pfn_is_ram' - so could there be similar one for
> 'pfn_range'?

yes, it is possible to replace '__weak remap_oldmem_pfn_range' with
'register_oldmem_pfn_is_ram'. However s390 arch overrides this function
in arch/s390/kernel/crash_dump.c so we'll have to make some changes
there as well.

>
>> 
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>> ---
>>  fs/proc/vmcore.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++-----
>>  1 file changed, 62 insertions(+), 6 deletions(-)
>> 
>> diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
>> index 382aa89..2716e19 100644
>> --- a/fs/proc/vmcore.c
>> +++ b/fs/proc/vmcore.c
>> @@ -328,6 +328,46 @@ static inline char *alloc_elfnotes_buf(size_t notes_sz)
>>   * virtually contiguous user-space in ELF layout.
>>   */
>>  #ifdef CONFIG_MMU
>> +static u64 remap_oldmem_pfn_checked(struct vm_area_struct *vma, u64 len,
>> +				    unsigned long pfn, unsigned long page_count)
>> +{
>> +	unsigned long pos;
>> +	size_t size;
>> +	unsigned long vma_addr;
>> +	unsigned long emptypage_pfn = __pa(empty_zero_page) >> PAGE_SHIFT;
>> +
>> +	for (pos = pfn; (pos - pfn) <= page_count; pos++) {
>> +		if (!pfn_is_ram(pos) || (pos - pfn) == page_count) {
>> +			/* we hit a page which is not ram or reached the end */
>> +			if (pos - pfn > 0) {
>> +				/* remapping continuous region */
>> +				size = (pos - pfn) << PAGE_SHIFT;
>> +				vma_addr = vma->vm_start + len;
>> +				if (remap_oldmem_pfn_range(vma, vma_addr,
>> +							   pfn, size,
>> +							   vma->vm_page_prot))
>> +					return len;
>> +				len += size;
>> +				page_count -= (pos - pfn);
>> +			}
>> +			if (page_count > 0) {
>> +				/* we hit a page which is not ram, replacing
>> +				   with an empty one */
>> +				vma_addr = vma->vm_start + len;
>> +				if (remap_oldmem_pfn_range(vma, vma_addr,
>> +							   emptypage_pfn,
>> +							   PAGE_SIZE,
>> +							   vma->vm_page_prot))
>> +					return len;
>> +				len += PAGE_SIZE;
>> +				pfn = pos + 1;
>> +				page_count--;
>> +			}
>> +		}
>> +	}
>> +	return len;
>> +}
>> +
>>  static int mmap_vmcore(struct file *file, struct vm_area_struct *vma)
>>  {
>>  	size_t size = vma->vm_end - vma->vm_start;
>> @@ -383,17 +423,33 @@ static int mmap_vmcore(struct file *file, struct vm_area_struct *vma)
>>  
>>  	list_for_each_entry(m, &vmcore_list, list) {
>>  		if (start < m->offset + m->size) {
>> -			u64 paddr = 0;
>> +			u64 paddr = 0, original_len;
>> +			unsigned long pfn, page_count;
>>  
>>  			tsz = min_t(size_t, m->offset + m->size - start, size);
>>  			paddr = m->paddr + start - m->offset;
>> -			if (remap_oldmem_pfn_range(vma, vma->vm_start + len,
>> -						   paddr >> PAGE_SHIFT, tsz,
>> -						   vma->vm_page_prot))
>> -				goto fail;
>> +
>> +			/* check if oldmem_pfn_is_ram was registered to avoid
>> +			   looping over all pages without a reason */
>> +			if (oldmem_pfn_is_ram) {
>> +				pfn = paddr >> PAGE_SHIFT;
>> +				page_count = tsz >> PAGE_SHIFT;
>> +				original_len = len;
>> +				len = remap_oldmem_pfn_checked(vma, len, pfn,
>> +							       page_count);
>> +				if (len != original_len + tsz)
>> +					goto fail;
>> +			} else {
>> +				if (remap_oldmem_pfn_range(vma,
>> +							   vma->vm_start + len,
>> +							   paddr >> PAGE_SHIFT,
>> +							   tsz,
>> +							   vma->vm_page_prot))
>> +					goto fail;
>> +				len += tsz;
>> +			}
>>  			size -= tsz;
>>  			start += tsz;
>> -			len += tsz;
>>  
>>  			if (size == 0)
>>  				return 0;
>> -- 
>> 1.9.3
>> 
>> 
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xen.org
>> http://lists.xen.org/xen-devel

-- 
  Vitaly

  reply	other threads:[~2014-07-09  9:23 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-07 15:05 [PATCH] mmap_vmcore: skip non-ram pages reported by hypervisors Vitaly Kuznetsov
2014-07-07 20:33 ` Andrew Morton
2014-07-08  8:08   ` Vitaly Kuznetsov
2014-07-08 16:25   ` [Xen-devel] " David Vrabel
2014-07-09  9:17     ` Vitaly Kuznetsov
2014-07-09  9:46       ` David Vrabel
2014-07-08 16:29 ` Konrad Rzeszutek Wilk
2014-07-09  9:23   ` Vitaly Kuznetsov [this message]
2014-07-08 19:11 ` Vivek Goyal
2014-07-09  9:46   ` Vitaly Kuznetsov
2014-07-09 10:12     ` [Xen-devel] " Olaf Hering

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87r41uopgx.fsf@vitty.brq.redhat.com \
    --to=vkuznets@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=holzheu@linux.vnet.ibm.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vgoyal@redhat.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox