Re: [PATCH] ALSA: hda/cm9825: Add new project GENE_TWL7 for AAEON

[Takashi Iwai <tiwai@suse.de>]

On Mon, 15 Dec 2025 09:14:21 +0100,
Leo Tsai wrote:
> 
> The GENE_TWL7 project is an AAEON platform with a fixed audio
> configuration consisting of line-out, line-in, and mic-in.
> The audio routing and pin assignments are defined according to
> the board-level hardware design and are not intended to be
> dynamically changed.
> 
> Signed-off-by: Leo Tsai <antivirus621@gmail.com>

Please put v2 (or later number) prefix when you resubmit a newer
patch (e.g. [PATCH v2] ALSA: hda/cm9825: ....)

One thin I haven't noticed in the previous review:

> @@ -258,6 +506,51 @@ static int cm9825_probe(struct hda_codec *codec, const struct hda_device_id *id)
>  	spec->chip_hp_present_verbs = cm9825_hp_present_verbs;
>  	spec->chip_hp_remove_verbs = cm9825_hp_remove_verbs;
>  
> +	switch (codec->core.subsystem_id) {
> +	case QUIRK_CM_STD:
> +		snd_hda_codec_set_name(codec, "CM9825 STD");
> +		INIT_DELAYED_WORK(&spec->unsol_hp_work,
> +				  cm9825_unsol_hp_delayed);
> +		spec->chip_d0_verbs = cm9825_std_d0_verbs;
> +		spec->chip_d3_verbs = cm9825_std_d3_verbs;
> +		spec->chip_hp_present_verbs = cm9825_hp_present_verbs;
> +		spec->chip_hp_remove_verbs = cm9825_hp_remove_verbs;
> +		cm9825_setup_unsol(codec);
> +		break;
> +	case QUIRK_GENE_TWL7_SSID:
> +		snd_hda_codec_set_name(codec, "CM9825 GENE_TWL7");
> +		INIT_DELAYED_WORK(&spec->unsol_linein_work,
> +				  cm9825_unsol_linein_delayed);
> +		INIT_DELAYED_WORK(&spec->unsol_lineout_work,
> +				  cm9825_unsol_lineout_delayed);
> +		spec->gen.hp_mic = 0;
> +		cfg->line_outs = 1;
> +		cfg->line_out_pins[0] = 0x36;
> +		cfg->line_out_type = AUTO_PIN_LINE_OUT;
> +		cfg->num_inputs = 2;
> +		cfg->inputs[0].pin = 0x3b;
> +		cfg->inputs[0].type = AUTO_PIN_LINE_IN;
> +		cfg->inputs[1].pin = 0x37;
> +		cfg->inputs[1].type = AUTO_PIN_MIC;
> +		cfg->inputs[1].is_headphone_mic = 1;

You're setting up the autocfg stuff here, but
snd_hda_parse_pin_defcfg() is called after this point.
Wouldn't it override the values set here?

That is, if you'd like to set up a static pin table, it's better to
provide your own default pin table via snd_hda_apply_pincfgs().
It's something like other codecs applying the pin quirks.


Takashi