* [GIT PULL] davinci updates for 2.6.37
@ 2010-10-25 17:08 Kevin Hilman
0 siblings, 0 replies; only message in thread
From: Kevin Hilman @ 2010-10-25 17:08 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel, davinci-linux-open-source
Linus,
Please pull davinci platform updates for 2.6.37:
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci.git davinci-for-linus
Note that I also merged Russell King's devel branch (which you already
merged) in order to fixup some final conflicts. diffstat/shortlog
follows for just the davinci specific parts.
Thanks,
Kevin
MAINTAINERS | 4 +-
arch/arm/configs/da8xx_omapl_defconfig | 3 +
arch/arm/mach-davinci/Kconfig | 76 +-
arch/arm/mach-davinci/Makefile | 4 +-
arch/arm/mach-davinci/aemif.c | 133 +++
arch/arm/mach-davinci/board-da830-evm.c | 24 +-
arch/arm/mach-davinci/board-da850-evm.c | 92 ++-
arch/arm/mach-davinci/board-dm365-evm.c | 11 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 20 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 21 +-
arch/arm/mach-davinci/board-mityomapl138.c | 424 +++++++
arch/arm/mach-davinci/board-neuros-osd2.c | 7 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 64 ++
arch/arm/mach-davinci/board-sffsdr.c | 7 +-
arch/arm/mach-davinci/board-tnetv107x-evm.c | 56 +
arch/arm/mach-davinci/clock.c | 75 ++-
arch/arm/mach-davinci/clock.h | 5 +
arch/arm/mach-davinci/cpufreq.c | 28 +-
arch/arm/mach-davinci/da850.c | 76 +-
arch/arm/mach-davinci/devices-da8xx.c | 70 ++-
arch/arm/mach-davinci/devices-tnetv107x.c | 50 +
arch/arm/mach-davinci/devices.c | 2 +-
arch/arm/mach-davinci/dm365.c | 23 +-
arch/arm/mach-davinci/dm644x.c | 23 +-
arch/arm/mach-davinci/dm646x.c | 22 +-
arch/arm/mach-davinci/dma.c | 8 +-
arch/arm/mach-davinci/include/mach/aemif.h | 36 +
arch/arm/mach-davinci/include/mach/da8xx.h | 7 +-
arch/arm/mach-davinci/include/mach/dm365.h | 2 +-
arch/arm/mach-davinci/include/mach/dm644x.h | 2 +-
arch/arm/mach-davinci/include/mach/dm646x.h | 2 +-
arch/arm/mach-davinci/include/mach/nand.h | 6 +-
arch/arm/mach-davinci/include/mach/psc.h | 1 +
arch/arm/mach-davinci/include/mach/tnetv107x.h | 3 +
arch/arm/mach-davinci/include/mach/uncompress.h | 2 +
arch/arm/mach-davinci/tnetv107x.c | 11 +-
arch/arm/mach-omap2/board-am3517evm.c | 31 +-
drivers/input/keyboard/Kconfig | 9 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/tnetv107x-keypad.c | 340 ++++++
drivers/input/touchscreen/Kconfig | 9 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/tnetv107x-ts.c | 396 +++++++
drivers/mtd/nand/davinci_nand.c | 61 +-
drivers/net/Kconfig | 21 +
drivers/net/Makefile | 2 +
drivers/net/davinci_cpdma.c | 965 ++++++++++++++++
drivers/net/davinci_cpdma.h | 108 ++
drivers/net/davinci_emac.c | 1338 +++--------------------
drivers/net/davinci_mdio.c | 475 ++++++++
include/linux/davinci_emac.h | 16 +-
51 files changed, 3814 insertions(+), 1359 deletions(-)
Cyril Chemparathy (17):
Davinci: tnetv107x: retain psc reg base after init
davinci: add idcode for tnetv107x rev 1.1/1.2
net: davinci_emac: separate out davinci mdio
davinci: add mdio platform devices
omap: add mdio platform devices
net: davinci_emac: switch to new mdio
davinci: cleanup mdio arch code and switch to phy_id
omap: cleanup unused davinci mdio arch code
net: davinci_emac: cleanup unused mdio emac code
net: davinci_emac: separate out cpdma code
net: davinci_emac: switch to new cpdma layer
net: davinci_emac: cleanup unused cpdma code
input: add driver for tnetv107x on-chip keypad controller
davinci: add tnetv107x keypad platform device
davinci: add keypad config for tnetv107x evm board
input: add driver for tnetv107x touchscreen controller
davinci: add tnetv107x touchscreen platform device
Juha Kuikka (3):
DA850: Add LPSC id for MMCSD1 peripheral
DA850: Split MMCSD clock into two to support both MMCSD peripherals
DA850: Add MMCSD1 resources, platform device and convenience registration function
Kevin Hilman (1):
davinci: clock: make 'disable unused clocks' printk debug only
Kulikov Vasiliy (1):
arm: mach-davinci: check irq2ctlr() result
Michael Williamson (5):
davinci: Add machine checks to DA8XX serial console init routines
davinci: Add CONFIG_REGULATOR_DUMMY to DA8XX defconfig file.
davinci: Initial support for MityDSP-L138/MityARM-1808
davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform
davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom
Nicolas Kaiser (1):
arm/davinci: remove duplicated include
Sekhar Nori (17):
davinci: da850 evm: sparse cleanup: make file local variables static
MAINTAINERS: Add Kevin's e-mail in entry for TI DaVinci
davinci: cpufreq: bailout on regulator errors
davinci: clean up inconsistent usage of spaces in Kconfig
davinci: introduce support for AM1x ARM9 microprocessors
davinci: am18x/da850/omap-l138: use 'NOM' voltage defined in datasheet as min voltage
davinci: dm365: disable pulldowns for all MMC/SD1 pins.
davinci: clock: add support for setting sysclk rate
davinci: cpufreq: add support for keeping an additional clock constant
davinci: am18x/da850/omap-l138: keep async clock constant with cpufreq
davinci: dm365 evm: use EDMAQ_3 as the audio DMA queue
davinci: add support for aemif timing configuration
nand: davinci: add support for timing configuration
davinci: dm644x evm: setup NAND flash timing
davinci: am18x/da850/omap-l138 evm: setup NAND flash timing
davinci: dm6467t evm: setup NAND flash timing
davinci: mityomapl138: make file local data static
Sergei Shtylyov (2):
DA850: move NAND/NOR pin lists to the board file
DA850: move MII/RMII pin lists to the board file
Sudhakar Rajashekhara (1):
davinci: am17x/da830/omap-l137 evm: setup NAND flash timing
Victor Rodriguez (1):
davinci: Initial support for Omapl138-Hawkboard
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-10-25 17:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-25 17:08 [GIT PULL] davinci updates for 2.6.37 Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox