From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Steven Rostedt <rostedt@goodmis.org>
Cc: devel@linuxdriverproject.org, x86@kernel.org,
linux-kernel@vger.kernel.org,
"K. Y. Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Stephen Hemminger <sthemmin@microsoft.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Jork Loeser <Jork.Loeser@microsoft.com>,
Simon Xiao <sixiao@microsoft.com>,
Andy Lutomirski <luto@kernel.org>
Subject: Re: [PATCH v4 10/10] tracing/hyper-v: trace hyperv_mmu_flush_tlb_others()
Date: Mon, 05 Jun 2017 18:19:08 +0200 [thread overview]
Message-ID: <87tw3u76gz.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20170605115048.472b5cfa@gandalf.local.home> (Steven Rostedt's message of "Mon, 5 Jun 2017 11:50:48 -0400")
Steven Rostedt <rostedt@goodmis.org> writes:
> On Wed, 24 May 2017 14:04:05 +0200
> Vitaly Kuznetsov <vkuznets@redhat.com> wrote:
>
>> Add Hyper-V tracing subsystem and trace hyperv_mmu_flush_tlb_others().
>> Tracing is done the same way we do xen_mmu_flush_tlb_others().
>>
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>> Acked-by: K. Y. Srinivasan <kys@microsoft.com>
>> Tested-by: Simon Xiao <sixiao@microsoft.com>
>> Tested-by: Srikanth Myakam <v-srm@microsoft.com>
>> ---
>> MAINTAINERS | 1 +
>> arch/x86/hyperv/mmu.c | 8 ++++++++
>> arch/x86/include/asm/trace/hyperv.h | 34 ++++++++++++++++++++++++++++++++++
>> 3 files changed, 43 insertions(+)
>> create mode 100644 arch/x86/include/asm/trace/hyperv.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 9e98464..045e10a 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -6168,6 +6168,7 @@ M: Stephen Hemminger <sthemmin@microsoft.com>
>> L: devel@linuxdriverproject.org
>> S: Maintained
>> F: arch/x86/include/asm/mshyperv.h
>> +F: arch/x86/include/asm/trace/hyperv.h
>> F: arch/x86/include/uapi/asm/hyperv.h
>> F: arch/x86/kernel/cpu/mshyperv.c
>> F: arch/x86/hyperv
>> diff --git a/arch/x86/hyperv/mmu.c b/arch/x86/hyperv/mmu.c
>> index c9cecb3..f6b5211 100644
>> --- a/arch/x86/hyperv/mmu.c
>> +++ b/arch/x86/hyperv/mmu.c
>> @@ -6,6 +6,10 @@
>> #include <asm/tlbflush.h>
>> #include <asm/msr.h>
>> #include <asm/fpu/api.h>
>> +#include <asm/trace/hyperv.h>
>> +
>> +#define CREATE_TRACE_POINTS
>> +DEFINE_TRACE(hyperv_mmu_flush_tlb_others);
>
> The above looks very wrong. Why are you using "DEFINE_TRACE()" here?
>
> The typical case is:
>
> #define CREATE_TRACE_POINTS
> #include <asm/trace/hyperv.h>
>
I probably got the idea wrong from Documentation/trace/tracepoints.txt:
"In subsys/file.c (where the tracing statement must be added) :
#include <trace/events/subsys.h>
#define CREATE_TRACE_POINTS
DEFINE_TRACE(subsys_eventname);
void somefct(void)
{
...
trace_subsys_eventname(arg, task);
...
}
"
> Does your patch even work?
>
I'm pretty sure I tested tracing this even before sending v2 of this
series, I'll retest before sending v7.
> -- Steve
>
>>
>> /* HvFlushVirtualAddressSpace, HvFlushVirtualAddressList hypercalls */
>> struct hv_flush_pcpu {
>> @@ -75,6 +79,8 @@ static void hyperv_flush_tlb_others(const struct cpumask *cpus,
>> u64 status = -1ULL;
>> int cpu, vcpu, gva_n, max_gvas;
>>
>> + trace_hyperv_mmu_flush_tlb_others(cpus, mm, start, end);
>> +
>> if (!pcpu_flush || !hv_hypercall_pg)
>> goto do_native;
>>
>> @@ -161,6 +167,8 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
>> u64 status = -1ULL;
>> int nr_bank = 0, max_gvas, gva_n;
>>
>> + trace_hyperv_mmu_flush_tlb_others(cpus, mm, start, end);
>> +
>> if (!pcpu_flush_ex || !hv_hypercall_pg)
>> goto do_native;
>>
>> diff --git a/arch/x86/include/asm/trace/hyperv.h b/arch/x86/include/asm/trace/hyperv.h
>> new file mode 100644
>> index 0000000..e46a351
>> --- /dev/null
>> +++ b/arch/x86/include/asm/trace/hyperv.h
>> @@ -0,0 +1,34 @@
>> +#undef TRACE_SYSTEM
>> +#define TRACE_SYSTEM hyperv
>> +
>> +#if !defined(_TRACE_HYPERV_H) || defined(TRACE_HEADER_MULTI_READ)
>> +#define _TRACE_HYPERV_H
>> +
>> +#include <linux/tracepoint.h>
>> +
>> +#if IS_ENABLED(CONFIG_HYPERV)
>> +
>> +TRACE_EVENT(hyperv_mmu_flush_tlb_others,
>> + TP_PROTO(const struct cpumask *cpus, struct mm_struct *mm,
>> + unsigned long addr, unsigned long end),
>> + TP_ARGS(cpus, mm, addr, end),
>> + TP_STRUCT__entry(
>> + __field(unsigned int, ncpus)
>> + __field(struct mm_struct *, mm)
>> + __field(unsigned long, addr)
>> + __field(unsigned long, end)
>> + ),
>> + TP_fast_assign(__entry->ncpus = cpumask_weight(cpus);
>> + __entry->mm = mm;
>> + __entry->addr = addr,
>> + __entry->end = end),
>> + TP_printk("ncpus %d mm %p addr %lx, end %lx",
>> + __entry->ncpus, __entry->mm, __entry->addr, __entry->end)
>> + );
>> +
>> +#endif /* CONFIG_HYPERV */
>> +
>> +#endif /* _TRACE_HYPERV_H */
>> +
>> +/* This part must be outside protection */
>> +#include <trace/define_trace.h>
--
Vitaly
next prev parent reply other threads:[~2017-06-05 16:19 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-24 12:03 [PATCH v4 00/10] Hyper-V: praravirtualized remote TLB flushing and hypercall improvements Vitaly Kuznetsov
2017-05-24 12:03 ` [PATCH v4 01/10] x86/hyper-v: include hyperv/ only when CONFIG_HYPERV is set Vitaly Kuznetsov
2017-05-24 12:03 ` [PATCH v4 02/10] x86/hyper-v: stash the max number of virtual/logical processor Vitaly Kuznetsov
2017-05-27 17:43 ` Andy Shevchenko
2017-06-05 15:24 ` Steven Rostedt
2017-06-05 15:30 ` Stephen Hemminger
2017-05-24 12:03 ` [PATCH v4 03/10] x86/hyper-v: make hv_do_hypercall() inline Vitaly Kuznetsov
2017-05-27 17:46 ` Andy Shevchenko
2017-05-24 12:03 ` [PATCH v4 04/10] x86/hyper-v: fast hypercall implementation Vitaly Kuznetsov
2017-05-27 17:49 ` Andy Shevchenko
2017-05-24 12:04 ` [PATCH v4 05/10] hyper-v: use fast hypercall for HVCALL_SIGNAL_EVENT Vitaly Kuznetsov
2017-05-27 17:50 ` Andy Shevchenko
2017-05-24 12:04 ` [PATCH v4 06/10] x86/hyper-v: implement rep hypercalls Vitaly Kuznetsov
2017-05-24 12:04 ` [PATCH v4 07/10] hyper-v: globalize vp_index Vitaly Kuznetsov
2017-05-24 12:04 ` [PATCH v4 08/10] x86/hyper-v: use hypercall for remote TLB flush Vitaly Kuznetsov
2017-05-24 12:04 ` [PATCH v4 09/10] x86/hyper-v: support extended CPU ranges for TLB flush hypercalls Vitaly Kuznetsov
2017-05-27 18:13 ` Andy Shevchenko
2017-05-24 12:04 ` [PATCH v4 10/10] tracing/hyper-v: trace hyperv_mmu_flush_tlb_others() Vitaly Kuznetsov
2017-06-05 15:50 ` Steven Rostedt
2017-06-05 16:19 ` Vitaly Kuznetsov [this message]
2017-06-07 13:52 ` Steven Rostedt
2017-06-07 14:03 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tw3u76gz.fsf@vitty.brq.redhat.com \
--to=vkuznets@redhat.com \
--cc=Jork.Loeser@microsoft.com \
--cc=devel@linuxdriverproject.org \
--cc=haiyangz@microsoft.com \
--cc=hpa@zytor.com \
--cc=kys@microsoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=rostedt@goodmis.org \
--cc=sixiao@microsoft.com \
--cc=sthemmin@microsoft.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox