2.5.69-mm4

2.5.69-mm4

[Andrew Morton]

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.69/2.5.69-mm4/


Lots of small things.



Changes since 2.5.69-mm3:


-netfilter-skbuff-fix.patch
-nfs-writeback-tweak.patch
-rq-dyn-works.patch

 Merged

+SLAB_STORE_USER-larger-objects.patch

 Enable full slab debug for larger slabs.

+remove-verify_write-leftovers.patch

 Cleanup/build fix

+module_arch_cleanup-2.patch

 modules cleanup

+remove-devfs_register.patch

 Remvoe devfs_register()

+pnp-irqreturn-fix.patch

 IRQ fix

+vma-merging-missing-fput.patch

 VMA merging fip leak fix

+cpufreq-commented-out-code-bogon.patch

 cpufreq fix

+small-cleanup-for-__rmqueue.patch

 Cleanups

+cpufreq-oops-fix.patch

 Odd oops fix

+netif_receive_skb-warning-fix.patch

 Nail a warning

+misc.patch

 Little stuff

+large-dma_addr_t-PAE-only.patch

 dma_addr_t need not be 64-bit on CONFIG_HIGHMEM4G

+bump-module-ref-during-init.patch

 Modules race fix

+put_dirty_page-protection-fix.patch

 Stack segment page protection fix

+dcache_lock-vs-tasklist_lock-take-3.patch

 New version of this lock ranking bugfix

+hugetlbpage-extern-fix.patch

 Warning fixes/cleanups

+emergency-sync-printk.patch

 Print messages when emergency sync and emergency remount complete.

+clear-smi-fix.patch

 SMI/APCI fix

+inode-unhashing-fix-2.patch

 Fix an inode lookup race (needs work, probabaly)

+reserve-lustre-EAs.patch

 Reserve the Lustre extended attribute ID's

+setfont-loadkeys-fix.patch

 Propagate console ioctls across all VT's

+sched_best_cpu_fix-4.patch

 Numa scheduler fix fix fix

+spinlock-debugging-improvement.patch

 Enhance uniproc spinlock debugging

-pcmcia-deadlock-fix-2.patch
-pcmcia-fix.patch
+pcmcia-deadlock-fix-3.patch

 Updated

-kexec.patch
+reboot_on_bsp.patch
+apic_shutdown.patch
+i8259-shutdown.patch
+hwfixes-x86kexec.patch

Split up

+v4l-1.patch
+v4l-2.patch
+v4l-3.patch
+v4l-4.patch
+v4l-5.patch
+v4l-6.patch
+v4l-7.patch

 Video-4-Linux update

+checker-1.patch

 Thirteen Stanford checker memleak fixes

+mtrr-not-used-fix.patch

 Prevent bogus mtrr printk




All 135 patches


linus.patch

mm.patch
  add -mmN to EXTRAVERSION

kgdb-ga.patch
  kgdb stub for ia32 (George Anzinger's one)

SLAB_STORE_USER-larger-objects.patch
  enable slab debugging for larger objects

remove-verify_write-leftovers.patch
  Remove __verify_write leftovers

ipmi-warning-fixes.patch

irqreturn-uml.patch
  UML updates for the new IRQ API

irqreturn-aic79xx.patch
  Fix aic79xx for new IRQ API

irqreturn-drivers-net.patch

slab-magazine-layer.patch
  magazine layer for slab

config_spinline.patch
  uninline spinlocks for profiling accuracy.

ppc64-ioctl-pci-update.patch
  From: Anton Blanchard <anton@samba.org>
  Subject: ppc64 stuff

ppc64-reloc_hide.patch

ppc64-aio-32bit-emulation.patch
  32/64bit emulation for aio

ppc64-scruffiness.patch
  Fix some PPC64 compile warnings

ppc64-xics-irq-fix.patch
  PPC64 irq return fix

sym-do-160.patch
  make the SYM driver do 160 MB/sec

hrtimers-fix-signone.patch
  hrtimers: fix timer_create(2) && SIGEV_NONE

module_arch_cleanup-2.patch
  module_arch_cleanup()

remove-devfs_register.patch
  remove devfs_register

pnp-irqreturn-fix.patch
  fix pnp_test_handler return

irqreturn-snd-via-fix.patch
  via sound irqreturn fix

irq_cpustat-cleanup.patch
  irq_cpustat cleanup

config-PAGE_OFFSET.patch
  Configurable kenrel/user memory split

fat-speedup.patch
  fat cluster search speedup

vma-merging-missing-fput.patch
  Subject: [PATCH] Fix for vma merging refcounting bug

cpufreq-commented-out-code-bogon.patch
  Commented out printk causes change in program flow in cpufreq/p4-clockmod.c

small-cleanup-for-__rmqueue.patch
  small cleanup for __rmqueue

cpufreq-oops-fix.patch
  export cpufreq_driver to fix oops in proc interface

netif_receive_skb-warning-fix.patch
  netif_receive_skb() warning fix

misc.patch
  Misc fixes

large-dma_addr_t-PAE-only.patch
  64-bit dma_addr_t is only needed with PAE

irq-check-rate-limit.patch
  IRQs: handle bad return values from handlers

irq_desc-others.patch
  Fix up irq_desc initialisation for non-ia32

ext3-quota-reservation-fix.patch
  Quota write transaction size fix

quota-reference-drop-fix.patch
  dquot_transfer() fix

bump-module-ref-during-init.patch
  Bump module ref during init.

put_dirty_page-protection-fix.patch

dcache_lock-vs-tasklist_lock-take-3.patch
  Fix dcache_lock/tasklist_lock ranking bug

hugetlbpage-extern-fix.patch
  fix hugetlbpage scoping

buffer-debug.patch
  buffer.c debugging

ext3-truncate-ordered-pages.patch
  ext3: explicitly free truncated pages

3c59x-irq-fix.patch

VM_RESERVED-check.patch
  VM_RESERVED check

exit_mmap-TASK_SIZE.patch
  exit_mmap() TASK_SIZE fix

semop-race-fix-2.patch
  semop race fix #2

reiserfs_file_write-5.patch

visws-logo-fix.patch
  visws: fix penguin with sgi logo

clustered-io_apic-fix.patch
  Subject: [RFC][PATCH] fix for clusterd io_apics

emergency-sync-printk.patch
  provide user feedback for emergency sync and remount

rcu-stats.patch
  RCU statistics reporting

ext3-journalled-data-assertion-fix.patch
  Remove incorrect assertion from ext3

ide_setting_sem-fix.patch

reslabify-pgds-and-pmds.patch
  re-slabify i386 pgd's and pmd's

nfs-speedup.patch

nfs-oom-fix.patch
  nfs oom fix

sk-allocation.patch
  Subject: Re: nfs oom

nfs-more-oom-fix.patch

rpciod-atomic-allocations.patch
  Make rcpiod use atomic allocations

linux-isp.patch

isp-update-1.patch

clone-retval-fix.patch
  copy_process return value fix

de_thread-fix.patch
  de_thread memory corruption fix

list_del-debug.patch
  list_del debug check

airo-schedule-fix.patch
  airo.c: don't sleep in atomic regions

synaptics-mouse-support.patch
  Add Synaptics touchpad tweaking to psmouse driver

vmalloc-race-fix.patch
  vmalloc race fix

clear-smi-fix.patch
  Subject: [PATCH] linux-2.5.69_clear-smi-fix_A1

inode-unhashing-fix-2.patch
  Don't remove inode from hash until filesystem has deleted it

reserve-lustre-EAs.patch
  Reserve the ext2/ext3 EAs for the Lustre filesystem

kblockd.patch
  Create `kblockd' workqueue

cfq-infrastructure.patch

elevator-completion-api.patch
  elevator completion API

as-iosched.patch
  anticipatory I/O scheduler

as-use-completion.patch
  AS use completion notifier

as-remove-debug-checks.patch
  AS: remove debug checks

as-iosched-dyn.patch
  AS: update to dynamic request allocation API

as-monitor-seek-distance.patch
  AS: monitor seek distance

as-div64-fix.patch
  as: don't do 64-bit divides

as-small-hashes.patch
  AS: smaller hashes

unplug-use-kblockd.patch
  Use kblockd for running request queues

cfq-2.patch
  CFQ scheduler, #2

cfq-iosched-dyn.patch
  CFQ: update to rq-dyn API

unmap-page-debugging.patch
  unmap unused pages for debugging

fremap-all-mappings.patch
  Make all executable mappings be nonlinear

sched-2.5.68-B2.patch
  HT scheduler, sched-2.5.68-B2

sched-numa-warning-fix.patch
  scheduler warning fix for NUMA

sched_idle-typo-fix.patch
  fix sched_idle typo

kgdb-ga-idle-fix.patch

acpi-irq-ret-fix.patch
  acpi irq return value fix

sound-irq-hack.patch

oprofile-build-fix.patch
  Fix arch/i386/oprofile/init.c build error

setfont-loadkeys-fix.patch
  fix setfont and loadkeys on tty > 1

sched-2.5.64-D3.patch
  sched-2.5.64-D3, more interactivity changes

sched_best_cpu-fix.patch
  sched_best_cpu does not pick best cpu

sched_best_cpu-fix-2.patch
  sched_best_cpu does not pick best cpu (2/2)

generic_hweight64-fix.patch

sched_best_cpu_fix-4.patch
  Even more sched_best_cpu fixes

show_task-free-stack-fix.patch
  show_task() fix and cleanup

spinlock-debugging-improvement.patch
  Make debugging variant of spinlocks a bit more robust

htree-nfs-fix.patch
  Fix ext3 htree / NFS compatibility problems

htree-nfs-fix-2.patch
  htree nfs fix

htree-leak-fix.patch
  ext3: htree memory leak fix

put_task_struct-debug.patch

ia32-mknod64.patch
  mknod64 for ia32

ext2-64-bit-special-inodes.patch
  ext2: support for 64-bit device nodes

ext3-64-bit-special-inodes.patch
  ext3: support for 64-bit device nodes

64-bit-dev_t-kdev_t.patch
  64-bit dev_t and kdev_t

tty-64-bit-dev_t-warning-fix.patch
  tty layer 64-bit dev_t printk warning fix

oops-dump-preceding-code.patch
  i386 oops output: dump preceding code

lockmeter.patch

security-process-attribute-api.patch
  Process Attribute API for Security Modules

thread-info-in-task_struct.patch
  allow thread_info to be allocated as part of task_struct

ext3-no-bkl.patch

journal_dirty_metadata-speedup.patch

journal_get_write_access-speedup.patch

ext3-concurrent-block-inode-allocation.patch
  Subject: [PATCH] concurrent block/inode allocation for EXT3

ext3-orlov-approx-counter-fix.patch
  Fix orlov allocator boundary case

ext3-concurrent-block-allocation-fix-1.patch

ext3-concurrent-block-allocation-hashed.patch
  Subject: Re: [PATCH] concurrent block/inode allocation for EXT3

pcmcia-deadlock-fix-3.patch
  Fix PCMCIA deadlock (rev. 2)

reboot_on_bsp.patch

apic_shutdown.patch

i8259-shutdown.patch

hwfixes-x86kexec.patch

fbdev-updates.patch
  Fbdev update patch

v4l-1.patch
  Subject: [patch] v4l: #1 - video-buf update

v4l-2.patch
  Subject: [patch] v4l: #2 - v4l1-compat update

v4l-3.patch
  Subject: [patch] v4l: #3 - bttv driver update

v4l-4.patch
  Subject: [patch] v4l: #4 - bttv docmentation update

v4l-5.patch
  Subject: [patch] v4l: #5 - i2c module updates.

v4l-6.patch
  Subject: [patch] v4l: #6 - tuner module update

v4l-7.patch
  Subject: [patch] v4l: #7 - saa7134 driver update

checker-1.patch

mtrr-not-used-fix.patch
  kernel prints "mtrr: MTRR 2 not used" twice when exiting X

Re: 2.5.69-mm4

[Alexander Hoogerhuis]

[-- Attachment #1: Type: text/plain, Size: 929 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Andrew Morton <akpm@digeo.com> writes:
>
> [SNIP]
>

This happens on my config:

  gcc -Wp,-MD,net/core/.dev.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=pentium4 -Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include    -DKBUILD_BASENAME=dev -DKBUILD_MODNAME=dev -c -o net/core/.tmp_dev.o net/core/dev.c
net/core/dev.c:1496: conflicting types for `handle_bridge'
net/core/dev.c:1468: previous declaration of `handle_bridge'
net/core/dev.c: In function `handle_bridge':
net/core/dev.c:1499: warning: passing arg 2 of `handle_bridge' from incompatible pointer type
net/core/dev.c:1499: too few arguments to function `handle_bridge'
make[2]: *** [net/core/dev.o] Error 1
make[1]: *** [net/core] Error 2
make: *** [net] Error 2
alexh@lapper ~/src/linux/linux-2.5.69-mm4 $ &


[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 32904 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_025GB is not set
# CONFIG_05GB is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP=y
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
# CONFIG_I82092 is not set
CONFIG_I82365=m
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_ELAN_104NC=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_UCLINUX is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SLRAM=m
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set

#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_VERIFY_WRITE=y

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI device support
#
CONFIG_SCSI=m

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_ISP_NEW is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_ADLER32 is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
CONFIG_VLAN_8021Q=m
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
CONFIG_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_IP is not set
# CONFIG_BRIDGE_EBT_ARP is not set
# CONFIG_BRIDGE_EBT_VLAN is not set
# CONFIG_BRIDGE_EBT_MARK is not set
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_MARK_T=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_PCI_HERMES=m

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
CONFIG_NET_WIRELESS=y

#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
CONFIG_SHAPER=m

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
# CONFIG_IRTTY_OLD is not set
# CONFIG_IRPORT_SIR is not set

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_NSC_FIR=m
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_OLD is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_CHARDEV=m

#
# I2C Hardware Sensors Mainboard support
#
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISA=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_VIAPRO is not set

#
# I2C Hardware Sensors Chip support
#
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_I2C_SENSOR=m

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_KCS=m
CONFIG_IPMI_WATCHDOG=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_I810_TCO=m
# CONFIG_MIXCOMWD is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_AMD7XX_TCO is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HANGCHECK_TIMER=m

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_NAND=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="iso-8859-15"
CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set

#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m

#
# USB Host-to-Host Cables
#
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y

#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
# CONFIG_USB_CDCETHER is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_TEST=m
# CONFIG_USB_GADGET is not set

#
# Bluetooth support
#
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_USB_SCO=y
CONFIG_BT_USB_ZERO_PACKET=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_SPINLINE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_KGDB is not set
CONFIG_DEBUG_INFO=y
CONFIG_FRAME_POINTER=y

#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y

[-- Attachment #3: Type: text/plain, Size: 479 bytes --]


mvh,
A

- -- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>

iD8DBQE+wJiNCQ1pa+gRoggRAhO2AJ9JRd0egyrq8mFa7CVN0TIBy+ui9gCgx223
fP1NtZhr9zypfHcsRjJgwBo=
=R7rj
-----END PGP SIGNATURE-----

Re: 2.5.69-mm4

[Andrew Morton]

Alexander Hoogerhuis <alexh@ihatent.com> wrote:
>
> net/core/dev.c:1496: conflicting types for `handle_bridge'
>  net/core/dev.c:1468: previous declaration of `handle_bridge'

argh, sorry, stupid.

diff -puN net/core/dev.c~handle_bridge-fix net/core/dev.c
--- 25/net/core/dev.c~handle_bridge-fix	2003-05-13 00:10:47.000000000 -0700
+++ 25-akpm/net/core/dev.c	2003-05-13 00:10:57.000000000 -0700
@@ -1491,7 +1491,7 @@ static inline void handle_diverter(struc
 #endif
 }
 
-static inline int handle_bridge(struct sk_buff *skb,
+static inline int __handle_bridge(struct sk_buff *skb,
 			struct packet_type **pt_prev, int *ret)
 {
 #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
@@ -1548,7 +1548,7 @@ int netif_receive_skb(struct sk_buff *sk
 
 	handle_diverter(skb);
 
-	if (handle_bridge(skb, &pt_prev, &ret))
+	if (__handle_bridge(skb, &pt_prev, &ret))
 		goto out;
 
 	list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type)&15], list) {

_

Re: 2.5.69-mm4

[Alexander Hoogerhuis]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Andrew Morton <akpm@digeo.com> writes:

> Alexander Hoogerhuis <alexh@ihatent.com> wrote:
> >
> > net/core/dev.c:1496: conflicting types for `handle_bridge'
> >  net/core/dev.c:1468: previous declaration of `handle_bridge'
> 
> argh, sorry, stupid.
> 
> diff -puN net/core/dev.c~handle_bridge-fix net/core/dev.c
> --- 25/net/core/dev.c~handle_bridge-fix	2003-05-13 00:10:47.000000000 -0700
> +++ 25-akpm/net/core/dev.c	2003-05-13 00:10:57.000000000 -0700
> @@ -1491,7 +1491,7 @@ static inline void handle_diverter(struc
>  #endif
>  }
>  
> -static inline int handle_bridge(struct sk_buff *skb,
> +static inline int __handle_bridge(struct sk_buff *skb,
>  			struct packet_type **pt_prev, int *ret)
>  {
>  #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
> @@ -1548,7 +1548,7 @@ int netif_receive_skb(struct sk_buff *sk
>  
>  	handle_diverter(skb);
>  
> -	if (handle_bridge(skb, &pt_prev, &ret))
> +	if (__handle_bridge(skb, &pt_prev, &ret))
>  		goto out;
>  
>  	list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type)&15], list) {
> 

And this one :)

        ld -m elf_i386  -T arch/i386/vmlinux.lds.s arch/i386/kernel/head.o arch/i386/kernel/init_task.o   init/built-in.o --start-group  usr/built-in.o  arch/i386/kernel/built-in.o  arch/i386/mm/built-in.o  arch/i386/mach-default/built-in.o  kernel/built-in.o  mm/built-in.o  fs/built-in.o  ipc/built-in.o  security/built-in.o  crypto/built-in.o  lib/lib.a  arch/i386/lib/lib.a  drivers/built-in.o  sound/built-in.o  arch/i386/pci/built-in.o  net/built-in.o --end-group  -o .tmp_vmlinux1
kernel/built-in.o(.text+0x1005): In function `schedule':
: undefined reference to `active_load_balance'
make: *** [.tmp_vmlinux1] Error 1
alexh@lapper ~/src/linux/linux-2.5.69-mm4 $

mvh,
A
- -- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>

iD8DBQE+wKY3CQ1pa+gRoggRAmd6AKDCJGGIiqot4yzmTlVdWpvQR1JagwCaAsY7
UdsL8kbCLzCEKTrsL/ijsoA=
=Uhvc
-----END PGP SIGNATURE-----

Re: 2.5.69-mm4

[Helge Hafting]

On Tue, May 13, 2003 at 10:00:58AM +0200, Alexander Hoogerhuis wrote:
> And this one :)
> 
>         ld -m elf_i386  -T arch/i386/vmlinux.lds.s arch/i386/kernel/head.o arch/i386/kernel/init_task.o   init/built-in.o --start-group  usr/built-in.o  arch/i386/kernel/built-in.o  arch/i386/mm/built-in.o  arch/i386/mach-default/built-in.o  kernel/built-in.o  mm/built-in.o  fs/built-in.o  ipc/built-in.o  security/built-in.o  crypto/built-in.o  lib/lib.a  arch/i386/lib/lib.a  drivers/built-in.o  sound/built-in.o  arch/i386/pci/built-in.o  net/built-in.o --end-group  -o .tmp_vmlinux1
> kernel/built-in.o(.text+0x1005): In function `schedule':
> : undefined reference to `active_load_balance'

I got this one too, as well as:
drivers/built-in.o(.text+0x7d534): In function `fb_prepare_logo':
: undefined reference to `find_logo'

Helge Hafting

Re: 2.5.69-mm4

[Andrew Morton]

Helge Hafting <helgehaf@aitel.hist.no> wrote:
>
> > : undefined reference to `active_load_balance'
> 
>  I got this one too

I don't think so.  Please do a `make clean' and try again.

>, as well as:
>  drivers/built-in.o(.text+0x7d534): In function `fb_prepare_logo':
>  : undefined reference to `find_logo'

Is that thing _still_ there?

Does this fix?

diff -puN drivers/video/fbmem.c~fbmem-linkage-fix drivers/video/fbmem.c
--- 25/drivers/video/fbmem.c~fbmem-linkage-fix	2003-05-13 02:03:38.000000000 -0700
+++ 25-akpm/drivers/video/fbmem.c	2003-05-13 02:03:42.000000000 -0700
@@ -655,7 +655,7 @@ int fb_prepare_logo(struct fb_info *info
 	}
 
 	/* Return if no suitable logo was found */
-	fb_logo.logo = find_logo(info->var.bits_per_pixel);
+	fb_logo.logo = fb_find_logo(info->var.bits_per_pixel);
 	
 	if (!fb_logo.logo || fb_logo.logo->height > info->var.yres) {
 		fb_logo.logo = NULL;

_

[PATCH] Re: 2.5.69-mm4 undefined active_load_balance

[Helge Hafting]

Andrew Morton wrote:
> Helge Hafting <helgehaf@aitel.hist.no> wrote:
> 
>>>: undefined reference to `active_load_balance'
>>
>> I got this one too
> 
> 
> I don't think so.  Please do a `make clean' and try again.
> 
You don't think so?  How come?
Note that this was a clean install, I unpacked
the 2.5.69 tarball, applied 2.5.69-mm3, copied a
.config file, and ran "make oldconfig; make bzImage"

I tried make clean, and still get
kernel/built-in.o(.text+0x102a): In function `schedule':
: undefined reference to `active_load_balance'
drivers/built-in.o(.text+0x7d534): In function `fb_prepare_logo':
: undefined reference to `find_logo'
make: *** [.tmp_vmlinux1] Error 1

During compile, I got a warning that active_load_balance
was implicitly declared or some such.

Looking at sched.c I see that
active_load_balance is declared if  CONFIG_SHARE_RUNQUEUE
is not set.

Later, if we have CONFIG_SMP _and_ CONFIG_SHARE_RUNQUEUE
we get a longer version of active_load_balance

So, active_load_balance doesn't exist if
CONFIG_SHARE_RUNQUEUE is set on a non-smp machine.

but schedule() later do a call to active_load_balance
that isn't masked by any #ifdef.  This machine isn't SMP,
and CONFIG_SHARE_RUNQUEUE gets set - so it goes wrong.

The problem seems to be in sched.h, which says:
/*
  * Is there a way to do this via Kconfig?
  */
#ifdef CONFIG_NR_SIBLINGS_2
# define CONFIG_NR_SIBLINGS 2
#elif defined(CONFIG_NR_SIBLINGS_4)
# define CONFIG_NR_SIBLINGS 4
#else
# define CONFIG_NR_SIBLINGS 0
#endif

#ifdef CONFIG_NR_SIBLINGS
# define CONFIG_SHARE_RUNQUEUE 1
#else
# define CONFIG_SHARE_RUNQUEUE 0
#endif

I get
# define CONFIG_NR_SIBLINGS 0
and the #ifdef CONFIG_NR_SIBLINGS
test triggers because something #defined
to 0 is #defined.  I guess this is the problem,
and if so, changing the #ifdef CONFIG_NR_SIBLINGS
to #if CONFIG_NR_SIBLINGS should do the trick.

A patch for this is at the end of the message.

> 
>>, as well as:
>> drivers/built-in.o(.text+0x7d534): In function `fb_prepare_logo':
>> : undefined reference to `find_logo'
> 
> 
> Is that thing _still_ there?
> 
> Does this fix?
[...]
Yes, thanks!

Patch for the active_load_balance problem.
It is not yet tested, it is compiling right now
and that takes time.

Helge Hafting

--- sched.h.orig        2003-05-13 15:45:17.000000000 +0200
+++ sched.h     2003-05-13 15:45:43.000000000 +0200
@@ -158,7 +158,7 @@
  # define CONFIG_NR_SIBLINGS 0
  #endif

-#ifdef CONFIG_NR_SIBLINGS
+#if CONFIG_NR_SIBLINGS
  # define CONFIG_SHARE_RUNQUEUE 1
  #else
  # define CONFIG_SHARE_RUNQUEUE 0

Re: [PATCH] Re: 2.5.69-mm4 undefined active_load_balance

[Helge Hafting]

On Tue, May 13, 2003 at 04:05:18PM +0200, Helge Hafting wrote:

> Patch for the active_load_balance problem.
> It is not yet tested, it is compiling right now
> and that takes time.

Of course I missed something.  Here is a patch
that compiles and links too, when also using Andrew's
fb-logo patch.  I haven't tried booting it yet, as
it is a remote machine.

Helge Hafting


--- sched.h.orig        2003-05-13 15:45:17.000000000 +0200
+++ sched.h     2003-05-13 18:07:01.000000000 +0200
@@ -158,10 +158,8 @@
 # define CONFIG_NR_SIBLINGS 0
 #endif
 
-#ifdef CONFIG_NR_SIBLINGS
+#if CONFIG_NR_SIBLINGS
 # define CONFIG_SHARE_RUNQUEUE 1
-#else
-# define CONFIG_SHARE_RUNQUEUE 0
 #endif
 extern void sched_map_runqueue(int cpu1, int cpu2);
 

Re: [PATCH] Re: 2.5.69-mm4 undefined active_load_balance

[Helge Hafting]

The active_load_balance patch in the previous mail
seems to work, the test machine rebooted
and came up just fine.

Helge Hafting

Re: [PATCH] Re: 2.5.69-mm4 undefined active_load_balance

[William Lee Irwin III]

On Tue, May 13, 2003 at 06:27:11PM +0200, Helge Hafting wrote:
> --- sched.h.orig        2003-05-13 15:45:17.000000000 +0200
> +++ sched.h     2003-05-13 18:07:01.000000000 +0200
> @@ -158,10 +158,8 @@
>  # define CONFIG_NR_SIBLINGS 0
>  #endif
> -#ifdef CONFIG_NR_SIBLINGS
> +#if CONFIG_NR_SIBLINGS
>  # define CONFIG_SHARE_RUNQUEUE 1
> -#else
> -# define CONFIG_SHARE_RUNQUEUE 0
>  #endif
>  extern void sched_map_runqueue(int cpu1, int cpu2);

Linus just committed a patch to eliminate such offenders.

Do you mean #if CONFIG_NR_SIBLINGS != 0 or #ifdef CONFIG_NR_SIBLINGS?


-- wli

Re: [PATCH] Re: 2.5.69-mm4 undefined active_load_balance

[Helge Hafting]

On Tue, May 13, 2003 at 12:38:47PM -0700, William Lee Irwin III wrote:
> On Tue, May 13, 2003 at 06:27:11PM +0200, Helge Hafting wrote:
> > --- sched.h.orig        2003-05-13 15:45:17.000000000 +0200
> > +++ sched.h     2003-05-13 18:07:01.000000000 +0200
> > @@ -158,10 +158,8 @@
> >  # define CONFIG_NR_SIBLINGS 0
> >  #endif
> > -#ifdef CONFIG_NR_SIBLINGS
> > +#if CONFIG_NR_SIBLINGS
> >  # define CONFIG_SHARE_RUNQUEUE 1
> > -#else
> > -# define CONFIG_SHARE_RUNQUEUE 0
> >  #endif
> >  extern void sched_map_runqueue(int cpu1, int cpu2);
> 
> Linus just committed a patch to eliminate such offenders.
> 
> Do you mean #if CONFIG_NR_SIBLINGS != 0 or #ifdef CONFIG_NR_SIBLINGS?

I don't know this code well, I'm just guessing the rigth way
to make it compile.  I don't know what's the "clean" way
to do #if/#ifdefs either - I could probably do better if I knew.

The problem was that CONFIG_SHARE_RUNQUEUE gets set even with
configs where it doesn't make sense, (i.e. uniprocessor without HT)
so I guessed it was some sort of misunderstanding about
how #ifdef works.  I hope whoever wrote that code will
take a look and either say "yes - that's what I meant"
or fix it in a better way.

Helge Hafting

Re: [PATCH] Re: 2.5.69-mm4 undefined active_load_balance

[William Lee Irwin III]

On Tue, May 13, 2003 at 12:38:47PM -0700, William Lee Irwin III wrote:
>> Linus just committed a patch to eliminate such offenders.
>> Do you mean #if CONFIG_NR_SIBLINGS != 0 or #ifdef CONFIG_NR_SIBLINGS?

On Tue, May 13, 2003 at 11:31:10PM +0200, Helge Hafting wrote:
> I don't know this code well, I'm just guessing the rigth way
> to make it compile.  I don't know what's the "clean" way
> to do #if/#ifdefs either - I could probably do better if I knew.
> The problem was that CONFIG_SHARE_RUNQUEUE gets set even with
> configs where it doesn't make sense, (i.e. uniprocessor without HT)
> so I guessed it was some sort of misunderstanding about
> how #ifdef works.  I hope whoever wrote that code will
> take a look and either say "yes - that's what I meant"
> or fix it in a better way.

Your fix was correct (the alternative is some rearrangment of those
#defines) and I carried it out with some additional #ifdef -> #if
conversions to cover the rest of the cases visible in my config and
sent it to akpm in another patch.


-- wli

Re: 2.5.69-mm4

[Alexander Hoogerhuis]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Helge Hafting <helgehaf@aitel.hist.no> writes:

> On Tue, May 13, 2003 at 10:00:58AM +0200, Alexander Hoogerhuis wrote:
> > And this one :)
> > 
> >         ld -m elf_i386  -T arch/i386/vmlinux.lds.s arch/i386/kernel/head.o arch/i386/kernel/init_task.o   init/built-in.o --start-group  usr/built-in.o  arch/i386/kernel/built-in.o  arch/i386/mm/built-in.o  arch/i386/mach-default/built-in.o  kernel/built-in.o  mm/built-in.o  fs/built-in.o  ipc/built-in.o  security/built-in.o  crypto/built-in.o  lib/lib.a  arch/i386/lib/lib.a  drivers/built-in.o  sound/built-in.o  arch/i386/pci/built-in.o  net/built-in.o --end-group  -o .tmp_vmlinux1
> > kernel/built-in.o(.text+0x1005): In function `schedule':
> > : undefined reference to `active_load_balance'
> 
> I got this one too, as well as:
> drivers/built-in.o(.text+0x7d534): In function `fb_prepare_logo':
> : undefined reference to `find_logo'
> 

make clean; make on mine, still there...

mvh,
A
- -- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>

iD8DBQE+wNEvCQ1pa+gRoggRAgi4AJ9gabgNlPOBxzTQmom8acDyaYA38QCgpg+w
fcZ3iMKojuGnvp0iTKGMDyE=
=0Gov
-----END PGP SIGNATURE-----

Re: 2.5.69-mm4

[Alexander Hoogerhuis]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Andrew Morton <akpm@digeo.com> writes:

> Alexander Hoogerhuis <alexh@ihatent.com> wrote:
> >
> > kernel/built-in.o(.text+0x1005): In function `schedule':
> >  : undefined reference to `active_load_balance'
> 
> I don't quite see how that can happen.  Tried a `make clean'?

Quoth Dr. Frankesteen: "It's alive!". Helge's oneliner in shced.h did
the trick. After patching in a custom DSDT, this is my leftover list
of things that go boom on recent kernels:

* During shutdown, whilst stopping hotplug and unloading usb hub
  drivers, machine freezes hard. Last printout is something along
  these lines:

        "usb-ohci 02:0e.2, address 3", or some such.

  Then the machine becomes a doorstop.

* Synaptics touchpad driver as of 2.5.69 does not recognise the "tap
  to click" functionality, and doesn't seem parse it's boot param to
  enable it, I get it to work by hardcoding the PARM-line in
  driver/input/mouse/psmouse.c to a "1". This might very well boil
  down to user error (PEBKAC) on the boot time parm, but the auto
  detection that worked up to .69 is b0rken.

* Insertion of my Palm cradle in the USB ports will result in this one
  once the cradle tries to go active (this one is from -mm2, present
  in -mm3 too):

Unable to handle kernel paging request at virtual address 8d3274f0
 printing eip:
f0a1c6ba
*pde = 00000000
Oops: 0002 [#1]
CPU:    0
EIP:    0060:[<f0a1c6ba>]    Tainted: PF  VLI
EFLAGS: 00010203
EIP is at usb_serial_probe+0x5e/0xdfd [usbserial]
eax: 064b1129   ebx: f0a21714   ecx: f0a21598   edx: ebac4400
esi: 00000000   edi: 00000000   ebp: dd9e9eb8   esp: dd9e9e00
ds: 007b   es: 007b   ss: 0068
Process modprobe (pid: 6353, threadinfo=dd9e8000 task=da240710)
Stack: efe92b64 dd9e9e20 00000246 c029761b 00000246 fffffff4 ed796980 ed562a80
       dd9e9e58 00000000 00000000 00000000 00000000 ed7969ec 000041ed 00000000
       dd9e9e5c ebac4400 edf85500 000000d0 ed7969ec 000041ed 00000000 dd9e9e6c
Call Trace:
 [<c01662e9>] d_instantiate+0x67/0x7b
 [<c0183a53>] sysfs_create+0x64/0x7e
 [<c01842d7>] sysfs_create_dir+0xa8/0xd6
 [<f0a21598>] usb_serial_driver+0x78/0x88 [usbserial]
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<f0a21520>] usb_serial_driver+0x0/0x88 [usbserial]
 [<f088009a>] usb_device_probe+0x8c/0xac [usbcore]
 [<f0a214e0>] +0x0/0x40 [usbserial]
 [<f0a214e0>] +0x0/0x40 [usbserial]
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<c01ef5a9>] bus_match+0x43/0x6e
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<f0899298>] usb_bus_type+0x98/0xe0 [usbcore]
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<c01ef6ab>] driver_attach+0x5c/0x60
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<f0899244>] usb_bus_type+0x44/0xe0 [usbcore]
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<c01ef979>] bus_add_driver+0xb1/0xc6
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<f0899200>] usb_bus_type+0x0/0xe0 [usbcore]
 [<f0a21520>] usb_serial_driver+0x0/0x88 [usbserial]
 [<f0a21900>] +0x0/0x200 [usbserial]
 [<c01efd97>] driver_register+0x31/0x35
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<f0a215c4>] usb_serial_tty_driver+0x4/0x120 [usbserial]
 [<c01dd77e>] tty_register_driver+0x17d/0x289
 [<f08801b7>] usb_register+0x6b/0xa6 [usbcore]
 [<f0a21538>] usb_serial_driver+0x18/0x88 [usbserial]
 [<f0a1d534>] usb_serial_register+0x4e/0xa0 [usbserial]
 [<f0a1ef60>] +0x5e0/0x998 [usbserial]
 [<f08330f3>] +0xf3/0x13f [usbserial]
 [<f0a21520>] usb_serial_driver+0x0/0x88 [usbserial]
 [<c0131624>] sys_init_module+0x133/0x209
 [<f0a21900>] +0x0/0x200 [usbserial]
 [<c010ae57>] syscall_call+0x7/0xb
 
Code: 00 00 00 c7 45 84 00 00 00 00 c7 85 78 ff ff ff 00 00 00 00 89 55 8c c7 85 74 ff ff ff 00 00 00 00 8b 03 0f 18 00 15 81 fb a8 15 <a2> f0 74 32 8d 4b ec 89 4d 84 8b 41 0c 89 44 24 04 8b 45 08 89
 <6>usb 2-1: USB disconnect, address 3

* On -mm3 under some loads mplayer can get very erratic, and after
  playing a videostream for about 10-15 mins it gets progressivly more
  prone to stalling. Moving the mousepointer into the window, and wiggling
  it a bit restores it for a while.

mvh,
A
- -- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>

iD8DBQE+wVV4CQ1pa+gRoggRAsE/AJ9Zx3MXrgbQwtsXer+4aBK7RbE9cQCePe/S
ywXMXOVr8cvgOdN2eknAJnk=
=CyEy
-----END PGP SIGNATURE-----

Re: 2.5.69-mm4

[Andrew Morton]

Alexander Hoogerhuis <alexh@ihatent.com> wrote:
>
> * Synaptics touchpad driver as of 2.5.69 does not recognise the "tap
>   to click" functionality, and doesn't seem parse it's boot param to
>   enable it, I get it to work by hardcoding the PARM-line in
>   driver/input/mouse/psmouse.c to a "1". This might very well boil
>   down to user error (PEBKAC) on the boot time parm, but the auto
>   detection that worked up to .69 is b0rken.

There's some synaptics patch in -mm which looks like it needs

	modprobe psmouse synaptics_tap=1

I'm not sure what the story is on getting all that finished off.

> * On -mm3 under some loads mplayer can get very erratic, and after
>   playing a videostream for about 10-15 mins it gets progressivly more
>   prone to stalling. Moving the mousepointer into the window, and wiggling
>   it a bit restores it for a while.

grr.  Can you run `vmstat 1' and see if those stalls correspond with swap
or disk I/O?

Re: 2.5.69-mm4

[Matt Mackall]

On Tue, May 13, 2003 at 02:53:35PM -0700, Andrew Morton wrote:
> Alexander Hoogerhuis <alexh@ihatent.com> wrote:
> >
> > * Synaptics touchpad driver as of 2.5.69 does not recognise the "tap
> >   to click" functionality, and doesn't seem parse it's boot param to
> >   enable it, I get it to work by hardcoding the PARM-line in
> >   driver/input/mouse/psmouse.c to a "1". This might very well boil
> >   down to user error (PEBKAC) on the boot time parm, but the auto
> >   detection that worked up to .69 is b0rken.
> 
> There's some synaptics patch in -mm which looks like it needs
> 
> 	modprobe psmouse synaptics_tap=1
> 
> I'm not sure what the story is on getting all that finished off.

While we're on the subject I'll mention that the 2.5 input layer sees
only the touchpad on my T30, and not the trackpoint. The psaux driver
in 2.4 works fine.

-- 
Matt Mackall : http://www.selenic.com : of or relating to the moon

Re: 2.5.69-mm4

[Alexander Hoogerhuis]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Matt Mackall <mpm@selenic.com> writes:

> While we're on the subject I'll mention that the 2.5 input layer sees
> only the touchpad on my T30, and not the trackpoint. The psaux driver
> in 2.4 works fine.
> 

I'll second that one.

mvh,
A
- -- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>

iD8DBQE+wd+rCQ1pa+gRoggRAoVbAJ9ue4s3+PtoxE47bfsV7w9aqLrMWgCePwcR
zrecFYp/2BOkRPatAPHpVFM=
=14pB
-----END PGP SIGNATURE-----

Re: 2.5.69-mm4

[Alexander Hoogerhuis]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Andrew Morton <akpm@digeo.com> writes:

> > * On -mm3 under some loads mplayer can get very erratic, and after
> >   playing a videostream for about 10-15 mins it gets progressivly more
> >   prone to stalling. Moving the mousepointer into the window, and wiggling
> >   it a bit restores it for a while.
> 
> grr.  Can you run `vmstat 1' and see if those stalls correspond with swap
> or disk I/O?

Here's the result of some light poking in my mailbox (moving single
mails form one folder to another, moved about 8 mails while this
scrolled by:

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 1  1   3700   4640   3568 479976    0    0   128 16020 2233  1926 50  4  0 46
 0  1   3700   4512   3568 463812    0    0   128  8704 2233  2856 13  4  0 83
 0  0   3700   5728   3624 500064    0    0   128  3424 2161  1428 51 21  8 20
 0  0   3700   5664   3624 500192    0    0   128     0 2070  2496 12  2 86  0
 0  1   3700   5536   3628 500320    0    0   128 13496 2188  2560 13  3 43 41
 9  1   3700   5408   3628 500448    0    0   128 16904 2325  2614 17  3  0 80
 0  1   3700   4576   3628 468596    0    0   128  8516 2222  2418 34  6  0 60
 3  1   3700   4832   3680 493404    0    0   128  7620 2220  1403 51 20  0 29
 0  0   3700  12192   3692 493532    0    0   132   180 2156  2601 18  3 45 33
 0  1   3700  12064   3716 493660    0    0   148 16372 2152  2640 13  3 40 45
 0  1   3700  11232   3724 477160    0    0   128  9488 2217  2392 38  5  0 57
 0  2   3700  11044   3724 460640    0    0   132  8960 2230  2869 13  4  0 83
 1  0   3700  15588   3788 489996    0    0   132 11896 2195  1246 61 19 16  4
 1  0   3700  15460   3788 490124    0    0   128     0 2078  2480 13  2 85  0
 0  2   3700  15284   3796 490252    0    0   128 10332 2198  2974 26  5 26 42
 0  2   3700  15220   3800 490380    0    0   128 16924 2310  2653 20  3  0 77
 0  1   3700  15092   3800 490508    0    0   128 17688 2363  2842 23  3  0 74
 0  0   3700  15348   3808 490636    0    0   128  1768 2239  2510 19  4 12 65
 0  0   3700  15220   3808 490764    0    0   128     0 2098  2584 19  2 79  0
 alexh@lapper ~ $

I'll have a hunt around to get more output if you want?

mvh,
A

- -- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>

iD8DBQE+weC1CQ1pa+gRoggRAjbHAKDHRp0FG4CLzcFLCaHST7ubrf4vyACgpQXM
vRWdd2M1QOfy/LMvyJphYzw=
=zuYD
-----END PGP SIGNATURE-----

Re: 2.5.69-mm4

[Andrew Morton]

Alexander Hoogerhuis <alexh@ihatent.com> wrote:
>
> Here's the result of some light poking in my mailbox (moving single
>  mails form one folder to another, moved about 8 mails while this
>  scrolled by:

Well something is performing a ton of writeout.  You'd expect
things to get a bit laggy.

Re: 2.5.69-mm4

[Alexander Hoogerhuis]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Andrew Morton <akpm@digeo.com> writes:

> Alexander Hoogerhuis <alexh@ihatent.com> wrote:
> >
> > Here's the result of some light poking in my mailbox (moving single
> >  mails form one folder to another, moved about 8 mails while this
> >  scrolled by:
> 
> Well something is performing a ton of writeout.  You'd expect
> things to get a bit laggy.

I'll bookmark this mail and get back, I've had other cases where I get
much worse stuff on an idle machine, and I'll give you the listing
from that once I get it :)

mvh,
A

- -- 
Alexander Hoogerhuis                               | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>

iD8DBQE+wez7CQ1pa+gRoggRAri/AJ4qxXs0fBFKB1Z27TD2a9K0rXmf3gCguvYt
LlwizmHT+jZTd6tAFf4srvQ=
=seNR
-----END PGP SIGNATURE-----

Re: 2.5.69-mm4 smp crash, seems fs/vm related

[Helge Hafting]

I tried 2.5.69-mm4 + your fblogo patch on my dual celeron.
It oopsed during boot. 
The machine has 384M RAM, it uses ext2 filessytems
on various scsi partitions, root is on a raid-0 device.
It is a nfsv3 server for another machine, I don't
think there were any nfs traffic when it crashed though.
The kernel uses preempt, devfs & framebuffer. 

Some scrolled off screen, this remained:

mempool_alloc
mempool_alloc
autoremove_wake_function
autoremove_wake_function
bio_alloc
mpage_alloc
do_mpage_readpage
radix_tree_insert
add_to_page_cache
mpage_readpages
ext2_get_block
read_pages
ext2_get_block
__alloc_pages
do_page_cache_readahead
filemap_populate
sys_remap_file_pages
do_mmap_pgoff
old_mmap
syscall_call
There were also a hex code listing at the end.

Helge Hafting
 

Re: 2.5.69-mm4

[William Lee Irwin III]

On Mon, May 12, 2003 at 10:55:04PM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.69/2.5.69-mm4/
> Lots of small things.

Nuke various warnings:
(1) noreturn function does return all over i386 arch code
(2) CONFIG_SHARE_RUNQUEUE bits, mostly Helge Hafting's thing, but also
	handle some more arch code nailed by it
(3) some kind of dmi_blacklist excess array initializer oddity

-- wli


diff -prauN mm4-2.5.69-1/arch/i386/kernel/apic.c mm4-2.5.69-2/arch/i386/kernel/apic.c
--- mm4-2.5.69-1/arch/i386/kernel/apic.c	2003-05-13 12:16:23.000000000 -0700
+++ mm4-2.5.69-2/arch/i386/kernel/apic.c	2003-05-13 12:32:08.000000000 -0700
@@ -1204,6 +1204,9 @@ void stop_apics(NORET_TYPE void(*rest)(v
 		set_cpus_allowed(current, 1 << arg.reboot_cpu_id);
 	}
 	on_each_cpu(cpu_stop_apics, &arg, 1, 0);
+	while (1) {
+		;
+	}
 }
 
 /*
diff -prauN mm4-2.5.69-1/arch/i386/kernel/cpu/proc.c mm4-2.5.69-2/arch/i386/kernel/cpu/proc.c
--- mm4-2.5.69-1/arch/i386/kernel/cpu/proc.c	2003-05-13 12:16:24.000000000 -0700
+++ mm4-2.5.69-2/arch/i386/kernel/cpu/proc.c	2003-05-13 12:44:27.000000000 -0700
@@ -115,7 +115,7 @@ static int show_cpuinfo(struct seq_file 
 		     fpu_exception ? "yes" : "no",
 		     c->cpuid_level,
 		     c->wp_works_ok ? "yes" : "no");
-#ifdef CONFIG_SHARE_RUNQUEUE
+#if CONFIG_SHARE_RUNQUEUE
 {
 	extern long __rq_idx[NR_CPUS];
 
diff -prauN mm4-2.5.69-1/arch/i386/kernel/dmi_scan.c mm4-2.5.69-2/arch/i386/kernel/dmi_scan.c
--- mm4-2.5.69-1/arch/i386/kernel/dmi_scan.c	2003-05-13 12:16:24.000000000 -0700
+++ mm4-2.5.69-2/arch/i386/kernel/dmi_scan.c	2003-05-13 12:47:01.000000000 -0700
@@ -816,7 +816,8 @@ static __initdata struct dmi_blacklist d
 	{ acer_cpufreq_pst, "Acer Aspire", {
 			MATCH(DMI_SYS_VENDOR, "Insyde Software"),
 			MATCH(DMI_BIOS_VERSION, "3A71"),
-			NO_MATCH, NO_MATCH, NO_MATCH
+			NO_MATCH,
+			NO_MATCH,
 			} },
 
 	{ NULL, }
diff -prauN mm4-2.5.69-1/arch/i386/kernel/reboot.c mm4-2.5.69-2/arch/i386/kernel/reboot.c
--- mm4-2.5.69-1/arch/i386/kernel/reboot.c	2003-05-13 12:16:24.000000000 -0700
+++ mm4-2.5.69-2/arch/i386/kernel/reboot.c	2003-05-13 12:53:05.000000000 -0700
@@ -229,7 +229,8 @@ void machine_real_restart(unsigned char 
 				: "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100)));
 }
 
-static void machine_restart_1(void * __unused)
+static NORET_TYPE void machine_restart_1(void *) ATTRIB_NORET;
+static NORET_TYPE void machine_restart_1(void *__unused)
 {
 	if(!reboot_thru_bios) {
 		/* rebooting needs to touch the page at absolute addr 0 */
@@ -243,13 +244,17 @@ static void machine_restart_1(void * __u
 	}
 
 	machine_real_restart(jump_to_bios, sizeof(jump_to_bios));
+	while (1) {
+		;
+	}
 }
 void machine_restart(char * __unused)
 {
 	stop_apics(machine_restart_1, 0);
 }
 
-static void machine_halt_1(void * __unused)
+static NORET_TYPE void machine_halt_1(void *) ATTRIB_NORET;
+static NORET_TYPE void machine_halt_1(void *__unused)
 {
 	stop_this_cpu();
 }
@@ -258,11 +263,15 @@ void machine_halt(void)
 	stop_apics(machine_halt_1, 0);
 }
 
-static void machine_power_off_1(void * __unused)
+static NORET_TYPE void machine_power_off_1(void *) ATTRIB_NORET;
+static NORET_TYPE void machine_power_off_1(void *__unused)
 {
 	if (pm_power_off)
 		pm_power_off();
 	stop_this_cpu();
+	while (1) {
+		;
+	}
 }
 void machine_power_off(void)
 {
diff -prauN mm4-2.5.69-1/include/linux/sched.h mm4-2.5.69-2/include/linux/sched.h
--- mm4-2.5.69-1/include/linux/sched.h	2003-05-13 12:16:38.000000000 -0700
+++ mm4-2.5.69-2/include/linux/sched.h	2003-05-13 12:45:02.000000000 -0700
@@ -158,7 +158,7 @@ extern void init_idle(task_t *idle, int 
 # define CONFIG_NR_SIBLINGS 0
 #endif
 
-#ifdef CONFIG_NR_SIBLINGS
+#if CONFIG_NR_SIBLINGS
 # define CONFIG_SHARE_RUNQUEUE 1
 #else
 # define CONFIG_SHARE_RUNQUEUE 0
diff -prauN mm4-2.5.69-1/kernel/sched.c mm4-2.5.69-2/kernel/sched.c
--- mm4-2.5.69-1/kernel/sched.c	2003-05-13 12:16:39.000000000 -0700
+++ mm4-2.5.69-2/kernel/sched.c	2003-05-13 12:44:05.000000000 -0700
@@ -161,7 +161,7 @@ struct prio_array {
  *  restrictions on the mappings - there can be 4 CPUs per
  *  runqueue or even assymetric mappings.)
  */
-#ifdef CONFIG_SHARE_RUNQUEUE
+#if CONFIG_SHARE_RUNQUEUE
 # define MAX_NR_SIBLINGS CONFIG_NR_SIBLINGS
   long __rq_idx[NR_CPUS] __cacheline_aligned;
   static long __cpu_idx[NR_CPUS] __cacheline_aligned;
@@ -1188,7 +1188,7 @@ out:
 	;
 }
 
-#ifdef CONFIG_SHARE_RUNQUEUE
+#if CONFIG_SHARE_RUNQUEUE
 static void active_load_balance(runqueue_t *this_rq, int this_cpu)
 {
 	runqueue_t *rq;
@@ -2789,7 +2789,7 @@ void __init sched_init(void)
 		/*
 		 * Start with a 1:1 mapping between CPUs and runqueues:
 		 */
-#ifdef CONFIG_SHARE_RUNQUEUE
+#if CONFIG_SHARE_RUNQUEUE
 		rq_idx(i) = i;
 		cpu_idx(i) = 0;
 #endif

Re: 2.5.69-mm4

[William Lee Irwin III]

On Mon, May 12, 2003 at 10:55:04PM -0700, Andrew Morton wrote:
>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.69/2.5.69-mm4/
>> Lots of small things.

On Tue, May 13, 2003 at 01:17:34PM -0700, William Lee Irwin III wrote:
> Nuke various warnings:
> (1) noreturn function does return all over i386 arch code
> (2) CONFIG_SHARE_RUNQUEUE bits, mostly Helge Hafting's thing, but also
> 	handle some more arch code nailed by it
> (3) some kind of dmi_blacklist excess array initializer oddity

Take 2: I missed one of the noreturns, in machine_halt_1():


diff -prauN mm4-2.5.69-1/arch/i386/kernel/apic.c mm4-2.5.69-2/arch/i386/kernel/apic.c
--- mm4-2.5.69-1/arch/i386/kernel/apic.c	2003-05-13 12:16:23.000000000 -0700
+++ mm4-2.5.69-2/arch/i386/kernel/apic.c	2003-05-13 12:32:08.000000000 -0700
@@ -1204,6 +1204,9 @@ void stop_apics(NORET_TYPE void(*rest)(v
 		set_cpus_allowed(current, 1 << arg.reboot_cpu_id);
 	}
 	on_each_cpu(cpu_stop_apics, &arg, 1, 0);
+	while (1) {
+		;
+	}
 }
 
 /*
diff -prauN mm4-2.5.69-1/arch/i386/kernel/cpu/proc.c mm4-2.5.69-2/arch/i386/kernel/cpu/proc.c
--- mm4-2.5.69-1/arch/i386/kernel/cpu/proc.c	2003-05-13 12:16:24.000000000 -0700
+++ mm4-2.5.69-2/arch/i386/kernel/cpu/proc.c	2003-05-13 12:44:27.000000000 -0700
@@ -115,7 +115,7 @@ static int show_cpuinfo(struct seq_file 
 		     fpu_exception ? "yes" : "no",
 		     c->cpuid_level,
 		     c->wp_works_ok ? "yes" : "no");
-#ifdef CONFIG_SHARE_RUNQUEUE
+#if CONFIG_SHARE_RUNQUEUE
 {
 	extern long __rq_idx[NR_CPUS];
 
diff -prauN mm4-2.5.69-1/arch/i386/kernel/dmi_scan.c mm4-2.5.69-2/arch/i386/kernel/dmi_scan.c
--- mm4-2.5.69-1/arch/i386/kernel/dmi_scan.c	2003-05-13 12:16:24.000000000 -0700
+++ mm4-2.5.69-2/arch/i386/kernel/dmi_scan.c	2003-05-13 12:47:01.000000000 -0700
@@ -816,7 +816,8 @@ static __initdata struct dmi_blacklist d
 	{ acer_cpufreq_pst, "Acer Aspire", {
 			MATCH(DMI_SYS_VENDOR, "Insyde Software"),
 			MATCH(DMI_BIOS_VERSION, "3A71"),
-			NO_MATCH, NO_MATCH, NO_MATCH
+			NO_MATCH,
+			NO_MATCH,
 			} },
 
 	{ NULL, }
diff -prauN mm4-2.5.69-1/arch/i386/kernel/reboot.c mm4-2.5.69-2/arch/i386/kernel/reboot.c
--- mm4-2.5.69-1/arch/i386/kernel/reboot.c	2003-05-13 12:16:24.000000000 -0700
+++ mm4-2.5.69-2/arch/i386/kernel/reboot.c	2003-05-13 13:04:24.000000000 -0700
@@ -229,7 +229,8 @@ void machine_real_restart(unsigned char 
 				: "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100)));
 }
 
-static void machine_restart_1(void * __unused)
+static NORET_TYPE void machine_restart_1(void *) ATTRIB_NORET;
+static NORET_TYPE void machine_restart_1(void *__unused)
 {
 	if(!reboot_thru_bios) {
 		/* rebooting needs to touch the page at absolute addr 0 */
@@ -243,26 +244,37 @@ static void machine_restart_1(void * __u
 	}
 
 	machine_real_restart(jump_to_bios, sizeof(jump_to_bios));
+	while (1) {
+		;
+	}
 }
 void machine_restart(char * __unused)
 {
 	stop_apics(machine_restart_1, 0);
 }
 
-static void machine_halt_1(void * __unused)
+static NORET_TYPE void machine_halt_1(void *) ATTRIB_NORET;
+static NORET_TYPE void machine_halt_1(void *__unused)
 {
 	stop_this_cpu();
+	while (1) {
+		;
+	}
 }
 void machine_halt(void)
 {
 	stop_apics(machine_halt_1, 0);
 }
 
-static void machine_power_off_1(void * __unused)
+static NORET_TYPE void machine_power_off_1(void *) ATTRIB_NORET;
+static NORET_TYPE void machine_power_off_1(void *__unused)
 {
 	if (pm_power_off)
 		pm_power_off();
 	stop_this_cpu();
+	while (1) {
+		;
+	}
 }
 void machine_power_off(void)
 {
diff -prauN mm4-2.5.69-1/include/linux/sched.h mm4-2.5.69-2/include/linux/sched.h
--- mm4-2.5.69-1/include/linux/sched.h	2003-05-13 12:16:38.000000000 -0700
+++ mm4-2.5.69-2/include/linux/sched.h	2003-05-13 12:45:02.000000000 -0700
@@ -158,7 +158,7 @@ extern void init_idle(task_t *idle, int 
 # define CONFIG_NR_SIBLINGS 0
 #endif
 
-#ifdef CONFIG_NR_SIBLINGS
+#if CONFIG_NR_SIBLINGS
 # define CONFIG_SHARE_RUNQUEUE 1
 #else
 # define CONFIG_SHARE_RUNQUEUE 0
diff -prauN mm4-2.5.69-1/kernel/sched.c mm4-2.5.69-2/kernel/sched.c
--- mm4-2.5.69-1/kernel/sched.c	2003-05-13 12:16:39.000000000 -0700
+++ mm4-2.5.69-2/kernel/sched.c	2003-05-13 12:44:05.000000000 -0700
@@ -161,7 +161,7 @@ struct prio_array {
  *  restrictions on the mappings - there can be 4 CPUs per
  *  runqueue or even assymetric mappings.)
  */
-#ifdef CONFIG_SHARE_RUNQUEUE
+#if CONFIG_SHARE_RUNQUEUE
 # define MAX_NR_SIBLINGS CONFIG_NR_SIBLINGS
   long __rq_idx[NR_CPUS] __cacheline_aligned;
   static long __cpu_idx[NR_CPUS] __cacheline_aligned;
@@ -1188,7 +1188,7 @@ out:
 	;
 }
 
-#ifdef CONFIG_SHARE_RUNQUEUE
+#if CONFIG_SHARE_RUNQUEUE
 static void active_load_balance(runqueue_t *this_rq, int this_cpu)
 {
 	runqueue_t *rq;
@@ -2789,7 +2789,7 @@ void __init sched_init(void)
 		/*
 		 * Start with a 1:1 mapping between CPUs and runqueues:
 		 */
-#ifdef CONFIG_SHARE_RUNQUEUE
+#if CONFIG_SHARE_RUNQUEUE
 		rq_idx(i) = i;
 		cpu_idx(i) = 0;
 #endif

Re: 2.5.69-mm4

[William Lee Irwin III]

On Mon, May 12, 2003 at 10:55:04PM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.69/2.5.69-mm4/
> Lots of small things.
> thread-info-in-task_struct.patch
>   allow thread_info to be allocated as part of task_struct

AIUI the task_cache is meant to prevent certain task_t (dear gawd I
can't stand those _struct suffixes) refcounting pathologies because
the task_t has its final put done by the task itself or something
on that order, so it may be better for ia64 to adapt the task_cache to
their purposes instead of wiping it entirely. Also, making the
task_cache treatment uniform apart from its declaration would allow the
#ifdef to be shoved in a header.

Alternatively, one could alter the timing of the final put on a task_t
so as to handle it similarly to the final mmput() (though here, too it
might be more sightly to #ifdef the necessary bits in headers).

I think there are already outstanding task_t refcounting bugs, so I'm
not entirely sure where we stand wrt. changing final put mechanics.

-- wli

Re: 2.5.69-mm4

[David Mosberger]

>>>>> On Tue, 13 May 2003 17:15:36 -0700, William Lee Irwin III <wli@holomorphy.com> said:

  William> On Mon, May 12, 2003 at 10:55:04PM -0700, Andrew Morton
  William> wrote:
  >> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.69/2.5.69-mm4/
  >> Lots of small things.  thread-info-in-task_struct.patch allow
  >> thread_info to be allocated as part of task_struct

  William> AIUI the task_cache is meant to prevent certain task_t
  William> (dear gawd I can't stand those _struct suffixes)
  William> refcounting pathologies because the task_t has its final
  William> put done by the task itself or something on that order, so
  William> it may be better for ia64 to adapt the task_cache to their
  William> purposes instead of wiping it entirely. Also, making the
  William> task_cache treatment uniform apart from its declaration
  William> would allow the #ifdef to be shoved in a header.

  William> Alternatively, one could alter the timing of the final put
  William> on a task_t so as to handle it similarly to the final
  William> mmput() (though here, too it might be more sightly to
  William> #ifdef the necessary bits in headers).

  William> I think there are already outstanding task_t refcounting
  William> bugs, so I'm not entirely sure where we stand wrt. changing
  William> final put mechanics.

All I really care about is that (a) task_struct, thread_info, and
kernel stack remain contiugous and within a single 64MB page and (b)
that it be fast (as usual ;-).  Other than that, it doesn't really
matter where the memory comes from.

	--david

Re: 2.5.69-mm4

[Felipe Alfaro Solana]

[-- Attachment #1: Type: text/plain, Size: 828 bytes --]

Hi!

        ld -m elf_i386  -T arch/i386/vmlinux.lds.s
arch/i386/kernel/head.o arch/i386/kernel/init_task.o   init/built-in.o
--start-group  usr/built-in.o  arch/i386/kernel/built-in.o 
arch/i386/mm/built-in.o  arch/i386/mach-default/built-in.o 
kernel/built-in.o  mm/built-in.o  fs/built-in.o  ipc/built-in.o 
security/built-in.o  crypto/built-in.o  lib/lib.a  arch/i386/lib/lib.a 
drivers/built-in.o  sound/built-in.o  arch/i386/pci/built-in.o 
net/built-in.o --end-group  -o vmlinux
kernel/built-in.o(.text+0x1161): In function `schedule':
: undefined reference to `active_load_balance'
make[2]: *** [vmlinux] Error 1
make[1]: *** [vmlinux] Error 2

Config attached.

-- 
Please AVOID sending me WORD, EXCEL or POWERPOINT attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html
Linux Registered User #287198

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 19178 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_025GB is not set
# CONFIG_05GB is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI device support
#
# CONFIG_SCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
# CONFIG_IP_NF_MATCH_AH_ESP is not set
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_MIRROR is not set
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# I2C support
#
# CONFIG_I2C is not set

#
# I2C Hardware Sensors Mainboard support
#

#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_RTCTIMER=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_YMFPCI=y
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# SCSI support is needed for USB Storage
#

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_SCANNER=m

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_INFO=y
# CONFIG_FRAME_POINTER is not set

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_X86_BIOS_REBOOT=y

Re: 2.5.69-mm4

[Shane Shrybman]

Hi,

Got this on -mm4. (64bit dev_t patch is backed out too)

drivers/media/video/tuner.c:963: unknown field `name' specified in
initializer
drivers/media/video/tuner.c:963: warning: missing braces around
initializer
drivers/media/video/tuner.c:963: warning: (near initialization for
`client_template.dev')
drivers/media/video/tuner.c:963: warning: initialization from
incompatible pointer type
drivers/media/video/tuner.c:964: unknown field `flags' specified in
initializer
drivers/media/video/tuner.c:964: warning: initialization makes pointer
from integer without a cast
drivers/media/video/tuner.c:965: unknown field `driver' specified in
initializer
drivers/media/video/tuner.c:965: warning: initialization from
incompatible pointer type
make[3]: *** [drivers/media/video/tuner.o] Error 1
make[2]: *** [drivers/media/video] Error 2
make[1]: *** [drivers/media] Error 2
make: *** [drivers] Error 2

Regards,

Shane