Re: [PATCH v2 13/13] ARM: dts: r9a06g032: Describe the QSPI controller

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Geert,

On 15/01/2026 at 14:00:49 +01, Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> Hi Miquel,
>
> On Thu, 15 Jan 2026 at 10:25, Miquel Raynal (Schneider Electric)
> <miquel.raynal@bootlin.com> wrote:
>> Add a node describing the QSPI controller.
>> There are 2 clocks feeding this controller:
>> - one for the reference clock
>> - one that feeds both the ahb and the apb interfaces
>> As the binding expect either the ref clock, or all three (ref, ahb and
>> apb) clocks, it makes sense to provide the same clock twice.
>>
>> Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
>
> Thanks for your patch!
>
>> --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
>> +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
>> @@ -66,6 +66,20 @@ soc {
>>                 #size-cells = <1>;
>>                 ranges;
>>
>> +               qspi0: spi@40005000 {
>> +                       compatible = "renesas,r9a06g032-qspi", "renesas,rzn1-qspi", "cdns,qspi-nor";
>> +                       reg = <0x40005000 0x1000>, <0x10000000 0x10000000>;
>> +                       interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
>> +                       clocks = <&sysctrl R9A06G032_CLK_QSPI0>, <&sysctrl R9A06G032_HCLK_QSPI0>,
>> +                                <&sysctrl R9A06G032_HCLK_QSPI0>;
>> +                       clock-names = "ref", "ahb", "apb";
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +                       cdns,fifo-width = <4>;
>
> <4> is the default, right?
>
>> +                       cdns,trigger-address = <0>;
>
> Where in the RZ/N1 docs can I find if these two properties are
> correct?

Actually, fifo-width, fifo-depth and trigger-address have no meaning for
the RZ/N1 IP, as they are only useful for indirect accesses, which are
not supported. For the field that has a register for dynamic discovery,
it is marked reserved and returns nothing useful. So I will just adapt
the bindings according to these limitations and simply drop these
properties from the DTSI.

Thanks,
Miquèl