[PATCH v2] ARM: debug-ll: add default address for digicolor

Arnd Bergmann
2019-04-17T12:52:10Z

The digicolor platform has three UARTs, but the Kconfig.debug
file explicitly lists port zero as the one to be used for the
console, while not providing any default values.

This can get an automated randconfig build stuck in a loop
waiting for the user to input the number. As we already know
the physical address, this patch provides that number as
default, along with a reasonable default value for the virtual
address.

Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: fix physical address

arch/arm/Kconfig.debug | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 6d6e0330930b..12c0d29b75e3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1677,6 +1677,7 @@ config DEBUG_UART_PHYS
default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
default 0xe8008000 if DEBUG_R7S72100_SCIF2
default 0xf0000be0 if ARCH_EBSA110
+ default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1784,6 +1785,7 @@ config DEBUG_UART_VIRT
default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE
+ default 0xfe000000 if DEBUG_DIGICOLOR_UA0
default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
--
2.20.0