Re: USB problem with a mass storage device on 2.6.10

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

From: Roseline Bonchamp <roseline.bonchamp@gmail.com>
To: linux-usb-users@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: Re: USB problem with a mass storage device on 2.6.10
Date: Mon, 10 Jan 2005 14:58:27 +0100	[thread overview]
Message-ID: <884a349a050110055817260041@mail.gmail.com> (raw)
In-Reply-To: <884a349a050110044654d75f7b@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 230 bytes --]

I forgot the attachments.

I tried this on 5 different PCs, here is lspci from one of them.
The other log is from kernel 2.6.9 wich seems to "crash", but allow me
to use my mass storage device perfectly (2.6.10 does'nt)

Roseline

[-- Attachment #2: kernel_crash.2.6.9.log --]
[-- Type: application/octet-stream, Size: 8553 bytes --]

Jan 10 13:32:20 localhost kernel: usb 1-2: USB disconnect, address 4


Jan 10 13:32:24 localhost kernel: usb 1-2: new high speed USB device using address 5
Jan 10 13:32:25 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 10 13:32:25 localhost kernel:   Vendor: I-Stick2  Model: IntelligentStick  Rev: 2.00
Jan 10 13:32:25 localhost kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jan 10 13:32:25 localhost kernel: sda: Unit Not Ready, sense:
Jan 10 13:32:25 localhost kernel: Current : sense key Unit Attention
Jan 10 13:32:25 localhost kernel: Additional sense: Not ready to ready change, medium may have changed
Jan 10 13:32:25 localhost kernel: sda : READ CAPACITY failed.
Jan 10 13:32:25 localhost kernel: sda : status=1, message=00, host=0, driver=08
Jan 10 13:32:25 localhost kernel: Current sd: sense key Unit Attention
Jan 10 13:32:25 localhost kernel: Additional sense: Not ready to ready change, medium may have changed
Jan 10 13:32:25 localhost kernel: sda: assuming Write Enabled
Jan 10 13:32:25 localhost kernel: sda: Unit Not Ready, sense:
Jan 10 13:32:25 localhost kernel: Current : sense key Unit Attention
Jan 10 13:32:25 localhost kernel: Additional sense: Not ready to ready change, medium may have changed
Jan 10 13:32:25 localhost kernel: sda : READ CAPACITY failed.
Jan 10 13:32:25 localhost kernel: sda : status=1, message=00, host=0, driver=08
Jan 10 13:32:25 localhost kernel: Current sd: sense key Unit Attention
Jan 10 13:32:25 localhost kernel: Additional sense: Not ready to ready change, medium may have changed
Jan 10 13:32:25 localhost kernel: sda: assuming Write Enabled
Jan 10 13:32:26 localhost kernel: sda: Unit Not Ready, sense:
Jan 10 13:32:26 localhost kernel: Current : sense key Unit Attention
Jan 10 13:32:26 localhost kernel: Additional sense: Not ready to ready change, medium may have changed
Jan 10 13:32:26 localhost kernel: SCSI device sda: 2047488 512-byte hdwr sectors (1048 MB)
Jan 10 13:32:26 localhost kernel: sda: assuming Write Enabled
Jan 10 13:32:26 localhost kernel:  /dev/scsi/host1/bus0/target0/lun0: p1 p2
Jan 10 13:32:26 localhost kernel:  /dev/scsi/host1/bus0/target0/lun0: p1 p2
Jan 10 13:32:26 localhost kernel: devfs_mk_dev: could not append to parent for scsi/host1/bus0/target0/lun0/part1
Jan 10 13:32:26 localhost kernel: kobject_register failed for sda1 (-17)
Jan 10 13:32:26 localhost kernel:  [<c01bbbab>] kobject_register+0x5b/0x60
Jan 10 13:32:26 localhost kernel:  [<c017fcbb>] add_partition+0xeb/0x120
Jan 10 13:32:26 localhost kernel:  [<c017fe9a>] register_disk+0x14a/0x180
Jan 10 13:32:26 localhost kernel:  [<c021c45c>] add_disk+0x4c/0x60
Jan 10 13:32:26 localhost kernel:  [<c021c3e0>] exact_match+0x0/0x10
Jan 10 13:32:26 localhost kernel:  [<c021c3f0>] exact_lock+0x0/0x20
Jan 10 13:32:26 localhost kernel:  [<e083bbab>] sd_probe+0x23b/0x390 [sd_mod]
Jan 10 13:32:26 localhost kernel:  [<c0186848>] sysfs_add_file+0x78/0xa0
Jan 10 13:32:26 localhost kernel:  [<c0213a6f>] bus_match+0x3f/0x70
Jan 10 13:32:26 localhost kernel:  [<c0213aef>] device_attach+0x4f/0xa0
Jan 10 13:32:26 localhost kernel:  [<c01bbd6a>] kobject_get+0x1a/0x30
Jan 10 13:32:26 localhost kernel:  [<c0213e0b>] bus_add_device+0x5b/0xb0
Jan 10 13:32:26 localhost kernel:  [<c0212b31>] device_add+0xa1/0x130
Jan 10 13:32:26 localhost kernel:  [<c025af22>] scsi_sysfs_add_sdev+0x52/0x200
Jan 10 13:32:26 localhost kernel:  [<c0279e5b>] slave_configure+0x2b/0x90
Jan 10 13:32:26 localhost kernel:  [<c0279e30>] slave_configure+0x0/0x90
Jan 10 13:32:26 localhost kernel:  [<c02597d9>] scsi_add_lun+0x2d9/0x380
Jan 10 13:32:26 localhost kernel:  [<c0259959>] scsi_probe_and_add_lun+0xd9/0x240
Jan 10 13:32:26 localhost kernel:  [<c025a1f8>] scsi_scan_target+0xa8/0x130
Jan 10 13:32:26 localhost kernel:  [<c025a309>] scsi_scan_channel+0x89/0xa0
Jan 10 13:32:26 localhost kernel:  [<c025a3f1>] scsi_scan_host_selected+0xd1/0x110
Jan 10 13:32:26 localhost kernel:  [<c025a460>] scsi_scan_host+0x30/0x40
Jan 10 13:32:26 localhost kernel:  [<c027cb46>] storage_probe+0x146/0x1e0
Jan 10 13:32:26 localhost kernel:  [<c01862b0>] init_file+0x0/0x20
Jan 10 13:32:26 localhost kernel:  [<c0261aab>] usb_probe_interface+0x6b/0x80
Jan 10 13:32:26 localhost kernel:  [<c0213a6f>] bus_match+0x3f/0x70
Jan 10 13:32:26 localhost kernel:  [<c0213aef>] device_attach+0x4f/0xa0
Jan 10 13:32:26 localhost kernel:  [<c01bbd6a>] kobject_get+0x1a/0x30
Jan 10 13:32:26 localhost kernel:  [<c0213e0b>] bus_add_device+0x5b/0xb0
Jan 10 13:32:26 localhost kernel:  [<c0212b31>] device_add+0xa1/0x130
Jan 10 13:32:26 localhost kernel:  [<c0268d03>] usb_set_configuration+0x303/0x470
Jan 10 13:32:26 localhost kernel:  [<c0263f32>] usb_new_device+0xb2/0x170
Jan 10 13:32:26 localhost kernel:  [<c0264c58>] hub_port_connect_change+0x1e8/0x3b0
Jan 10 13:32:26 localhost kernel:  [<c0265074>] hub_events+0x254/0x380
Jan 10 13:32:26 localhost kernel:  [<c02651d5>] hub_thread+0x35/0x120
Jan 10 13:32:26 localhost kernel:  [<c0116e70>] autoremove_wake_function+0x0/0x60
Jan 10 13:32:26 localhost kernel:  [<c0116e70>] autoremove_wake_function+0x0/0x60
Jan 10 13:32:26 localhost kernel:  [<c02651a0>] hub_thread+0x0/0x120
Jan 10 13:32:26 localhost kernel:  [<c01042ad>] kernel_thread_helper+0x5/0x18
Jan 10 13:32:26 localhost kernel: devfs_mk_dev: could not append to parent for scsi/host1/bus0/target0/lun0/part2
Jan 10 13:32:26 localhost kernel: kobject_register failed for sda2 (-17)
Jan 10 13:32:26 localhost kernel:  [<c01bbbab>] kobject_register+0x5b/0x60
Jan 10 13:32:26 localhost kernel:  [<c017fcbb>] add_partition+0xeb/0x120
Jan 10 13:32:26 localhost kernel:  [<c017fe9a>] register_disk+0x14a/0x180
Jan 10 13:32:26 localhost kernel:  [<c021c45c>] add_disk+0x4c/0x60
Jan 10 13:32:26 localhost kernel:  [<c021c3e0>] exact_match+0x0/0x10
Jan 10 13:32:26 localhost kernel:  [<c021c3f0>] exact_lock+0x0/0x20
Jan 10 13:32:26 localhost kernel:  [<e083bbab>] sd_probe+0x23b/0x390 [sd_mod]
Jan 10 13:32:26 localhost kernel:  [<c0186848>] sysfs_add_file+0x78/0xa0
Jan 10 13:32:26 localhost kernel:  [<c0213a6f>] bus_match+0x3f/0x70
Jan 10 13:32:26 localhost kernel:  [<c0213aef>] device_attach+0x4f/0xa0
Jan 10 13:32:26 localhost kernel:  [<c01bbd6a>] kobject_get+0x1a/0x30
Jan 10 13:32:26 localhost kernel:  [<c0213e0b>] bus_add_device+0x5b/0xb0
Jan 10 13:32:26 localhost kernel:  [<c0212b31>] device_add+0xa1/0x130
Jan 10 13:32:26 localhost kernel:  [<c025af22>] scsi_sysfs_add_sdev+0x52/0x200
Jan 10 13:32:26 localhost kernel:  [<c0279e5b>] slave_configure+0x2b/0x90
Jan 10 13:32:26 localhost kernel:  [<c0279e30>] slave_configure+0x0/0x90
Jan 10 13:32:26 localhost kernel:  [<c02597d9>] scsi_add_lun+0x2d9/0x380
Jan 10 13:32:26 localhost kernel:  [<c0259959>] scsi_probe_and_add_lun+0xd9/0x240
Jan 10 13:32:26 localhost kernel:  [<c025a1f8>] scsi_scan_target+0xa8/0x130
Jan 10 13:32:26 localhost kernel:  [<c025a309>] scsi_scan_channel+0x89/0xa0
Jan 10 13:32:26 localhost kernel:  [<c025a3f1>] scsi_scan_host_selected+0xd1/0x110
Jan 10 13:32:26 localhost kernel:  [<c025a460>] scsi_scan_host+0x30/0x40
Jan 10 13:32:26 localhost kernel:  [<c027cb46>] storage_probe+0x146/0x1e0
Jan 10 13:32:26 localhost kernel:  [<c01862b0>] init_file+0x0/0x20
Jan 10 13:32:26 localhost kernel:  [<c0261aab>] usb_probe_interface+0x6b/0x80
Jan 10 13:32:26 localhost kernel:  [<c0213a6f>] bus_match+0x3f/0x70
Jan 10 13:32:26 localhost kernel:  [<c0213aef>] device_attach+0x4f/0xa0
Jan 10 13:32:26 localhost kernel:  [<c01bbd6a>] kobject_get+0x1a/0x30
Jan 10 13:32:26 localhost kernel:  [<c0213e0b>] bus_add_device+0x5b/0xb0
Jan 10 13:32:26 localhost kernel:  [<c0212b31>] device_add+0xa1/0x130
Jan 10 13:32:26 localhost kernel:  [<c0268d03>] usb_set_configuration+0x303/0x470
Jan 10 13:32:26 localhost kernel:  [<c0263f32>] usb_new_device+0xb2/0x170
Jan 10 13:32:26 localhost kernel:  [<c0264c58>] hub_port_connect_change+0x1e8/0x3b0
Jan 10 13:32:26 localhost kernel:  [<c0265074>] hub_events+0x254/0x380
Jan 10 13:32:26 localhost kernel:  [<c02651d5>] hub_thread+0x35/0x120
Jan 10 13:32:26 localhost kernel:  [<c0116e70>] autoremove_wake_function+0x0/0x60
Jan 10 13:32:26 localhost kernel:  [<c0116e70>] autoremove_wake_function+0x0/0x60
Jan 10 13:32:26 localhost kernel:  [<c02651a0>] hub_thread+0x0/0x120
Jan 10 13:32:26 localhost kernel:  [<c01042ad>] kernel_thread_helper+0x5/0x18
Jan 10 13:32:26 localhost kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Jan 10 13:32:26 localhost scsi.agent[3109]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/host1/1:0:0:0


[-- Attachment #3: lspci.log --]
[-- Type: application/octet-stream, Size: 1791 bytes --]

0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
0000:02:04.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
0000:02:06.0 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller
0000:02:06.1 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller
0000:02:06.2 System peripheral: O2 Micro, Inc. OZ711Mx MultiMediaBay Accelerator
0000:02:06.3 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller
0000:02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)

next prev parent reply	other threads:[~2005-01-10 14:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-01-10 12:46 USB problem with a mass storage device on 2.6.10 Roseline Bonchamp
2005-01-10 13:58 ` Roseline Bonchamp [this message]
2005-01-10 15:53 ` [Linux-usb-users] " Stephen J. Gowdy
2005-01-10 18:03   ` Roseline Bonchamp

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=884a349a050110055817260041@mail.gmail.com \
    --to=roseline.bonchamp@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb-users@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox