Re: [PATCH] drm/bridge: imx: i.MX8 bridge drivers should depend on ARCH_MXC

[Liu Ying <victor.liu@nxp.com>]

On Tue, 2022-06-21 at 15:30 +0200, Geert Uytterhoeven wrote:
> The various Freescale i.MX8MP display bridges are only present on
> Freescale i.MX8 SoCs.  Hence add a dependency on ARCH_MXC, to prevent
> asking the user about these drivers when configuring a kernel without
> i.MX SoC support.

s/i.MX8MP/i.MX8/

For now, only i.MX8qm and i.MX8qxp display bridge drivers are in
bridge/imx directory, no i.MX8MP display bridge driver.

With this fixed:
Reviewed-by: Liu Ying <victor.liu@nxp.com>

> 
> Fixes: e60c4354840b2fe8 ("drm/bridge: imx: Add LDB support for
> i.MX8qm")
> Fixes: 3818715f62b42b5c ("drm/bridge: imx: Add LDB support for
> i.MX8qxp")
> Fixes: 96988a526c97cfbe ("drm/bridge: imx: Add i.MX8qxp pixel link to
> DPI support")
> Fixes: 1ec17c26bc06289d ("drm/bridge: imx: Add i.MX8qm/qxp display
> pixel link support")
> Fixes: 93e163a9e0392aca ("drm/bridge: imx: Add i.MX8qm/qxp pixel
> combiner support")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Probably the remaining i.MX bridge drivers in
> drivers/gpu/drm/bridge/Kconfig (e.g. DRM_FSL_LDB) should be moved
> here,
> too?

DRM_FSL_LDB is for i.MX8MP LVDS Display Bridge(LDB).
Here is a kinda appropriate directory for that driver I think, though
the filename fsl-ldb.c is perhaps a bit too generic(we have imx8qm-ldb-
driver.c and imx8qxp-ldb-driver.c). 

No other bridge drivers can be moved here, AFAICS.

Thanks,
Liu Ying 

> ---
>  drivers/gpu/drm/bridge/imx/Kconfig | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/imx/Kconfig
> b/drivers/gpu/drm/bridge/imx/Kconfig
> index 212a7b0e64fd8b5a..608f47f41bcd1c81 100644
> --- a/drivers/gpu/drm/bridge/imx/Kconfig
> +++ b/drivers/gpu/drm/bridge/imx/Kconfig
> @@ -1,3 +1,5 @@
> +if ARCH_MXC || COMPILE_TEST
> +
>  config DRM_IMX8QM_LDB
>  	tristate "Freescale i.MX8QM LVDS display bridge"
>  	depends on OF
> @@ -41,3 +43,5 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI
>  	help
>  	  Choose this to enable pixel link to display pixel
> interface(PXL2DPI)
>  	  found in Freescale i.MX8qxp processor.
> +
> +endif # ARCH_MXC || COMPILE_TEST