From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Sandor Yu <Sandor.yu@nxp.com>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
andrzej.hajda@intel.com, robert.foss@linaro.org,
Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se,
hverkuil-cisco@xs4all.nl,
Neil Armstrong <narmstrong@baylibre.com>
Cc: shengjiu.wang@nxp.com, cai.huoqing@linux.dev, maxime@cerno.tech,
harry.wentland@amd.com
Subject: Re: [PATCH v2 4/5] drm: bridge: dw_hdmi: add reset function for PHY GEN1
Date: Sun, 10 Apr 2022 12:14:17 +0200 [thread overview]
Message-ID: <8917523.CDJkKcVGEf@jernej-laptop> (raw)
In-Reply-To: <ddf6d1b2-9fa4-4384-6eda-7cd8b1119f89@baylibre.com>
Dne petek, 08. april 2022 ob 14:22:52 CEST je Neil Armstrong napisal(a):
> On 08/04/2022 12:32, Sandor Yu wrote:
> > PHY reset register(MC_PHYRSTZ) active high reset control for PHY GEN2,
> > and active low reset control for PHY GEN1.
> >
> > Rename function dw_hdmi_phy_reset to dw_hdmi_phy_gen2_reset.
> > Add dw_hdmi_phy_gen1_reset function for PHY GEN1.
> >
> > Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
> > ---
> >
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 14 +++++++++++---
> > drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 2 +-
> > include/drm/bridge/dw_hdmi.h | 4 +++-
> > 3 files changed, 15 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> > 5a7ec066e37a..13270d96e5be 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > @@ -1369,13 +1369,21 @@ static void
> > dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable)>
> > HDMI_PHY_CONF0_SELDIPIF_MASK);
> >
> > }
> >
> > -void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
> > +void dw_hdmi_phy_gen1_reset(struct dw_hdmi *hdmi)
> > +{
> > + /* PHY reset. The reset signal is active low on Gen1 PHYs. */
> > + hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> > + hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> > +}
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen1_reset);
> > +
> > +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi)
> >
> > {
> >
> > /* PHY reset. The reset signal is active high on Gen2 PHYs. */
> > hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> > hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> >
> > }
> >
> > -EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_reset);
> >
> > void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address)
> > {
> >
> > @@ -1529,7 +1537,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi,
> >
> > if (phy->has_svsret)
> >
> > dw_hdmi_phy_enable_svsret(hdmi, 1);
> >
> > - dw_hdmi_phy_reset(hdmi);
> > + dw_hdmi_phy_gen2_reset(hdmi);
> >
> > hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT,
HDMI_MC_HEACPHY_RST);
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 5e2b0175df36..2860e6bff8b7
> > 100644
> > --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > @@ -135,7 +135,7 @@ static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi
> > *hdmi,>
> > dw_hdmi_phy_gen2_txpwron(hdmi, 0);
> > dw_hdmi_phy_gen2_pddq(hdmi, 1);
> >
> > - dw_hdmi_phy_reset(hdmi);
> > + dw_hdmi_phy_gen2_reset(hdmi);
> >
> > dw_hdmi_phy_gen2_pddq(hdmi, 0);
> >
> > diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> > index 2a1f85f9a8a3..70082f80a8c8 100644
> > --- a/include/drm/bridge/dw_hdmi.h
> > +++ b/include/drm/bridge/dw_hdmi.h
> > @@ -187,9 +187,11 @@ void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi,
> > u8 address);>
> > void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> >
> > unsigned char addr);
> >
> > +void dw_hdmi_phy_gen1_reset(struct dw_hdmi *hdmi);
> > +
> >
> > void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
> > void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
> >
> > -void dw_hdmi_phy_reset(struct dw_hdmi *hdmi);
> > +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi);
> >
> > enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> >
> > void *data);
>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Best regards,
Jernej
>
> If a sun4i drm maintainer can ack, then it would be all good to apply.
>
> Neil
next prev parent reply other threads:[~2022-04-10 10:14 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 10:32 [PATCH v2 0/5] DRM: Bridge: DW_HDMI: Add new features and bug fix Sandor Yu
2022-04-08 10:32 ` [PATCH v2 1/5] drm: bridge: dw_hdmi: cec: Add cec suspend/resume function Sandor Yu
2022-04-08 13:41 ` Neil Armstrong
2022-04-10 10:13 ` Jernej Škrabec
2022-04-11 7:42 ` Neil Armstrong
2022-04-11 7:47 ` [EXT] " Sandor Yu
2022-04-08 10:32 ` [PATCH v2 2/5] drm: bridge: dw_hdmi: default enable workaround to clear the overflow Sandor Yu
2022-04-08 12:20 ` Neil Armstrong
2022-04-10 10:20 ` Jernej Škrabec
2022-04-08 10:32 ` [PATCH v2 3/5] drm: bridge: dw_hdmi: Enable GCP only for Deep Color Sandor Yu
2022-04-08 12:40 ` Neil Armstrong
2022-04-11 9:24 ` [EXT] " Sandor Yu
2022-04-08 10:32 ` [PATCH v2 4/5] drm: bridge: dw_hdmi: add reset function for PHY GEN1 Sandor Yu
2022-04-08 12:22 ` Neil Armstrong
2022-04-10 10:14 ` Jernej Škrabec [this message]
2022-04-08 10:32 ` [PATCH v2 5/5] drm: bridge: dw_hdmi: Audio: Add General Parallel Audio (GPA) driver Sandor Yu
2022-04-08 12:51 ` Neil Armstrong
2022-04-11 8:52 ` [EXT] " Sandor Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8917523.CDJkKcVGEf@jernej-laptop \
--to=jernej.skrabec@gmail.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=Sandor.yu@nxp.com \
--cc=andrzej.hajda@intel.com \
--cc=cai.huoqing@linux.dev \
--cc=dri-devel@lists.freedesktop.org \
--cc=harry.wentland@amd.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime@cerno.tech \
--cc=narmstrong@baylibre.com \
--cc=robert.foss@linaro.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox