From: MyungJoo Ham <myungjoo.ham@samsung.com>
To: Yadwinder Singh Brar <yadi.brar01@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "Mark Brown" <broonie@opensource.wolfsonmicro.com>,
"Liam Girdwood" <lrg@ti.com>, 이종화 <jonghwa3.lee@samsung.com>,
박경민 <kyungmin.park@samsung.com>, 변치웅 <woong.byun@samsung.com>,
"Axel Lin" <axel.lin@gmail.com>,
"Yadwinder Singh Brar" <yadi.brar@samsung.com>
Subject: Re: [PATCH v2] regulator: max77686: Implement .set_ramp_delay() callback.
Date: Wed, 20 Jun 2012 06:56:25 +0000 (GMT) [thread overview]
Message-ID: <8918866.625501340175384370.JavaMail.weblogic@epml24> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=euc-kr, Size: 3127 bytes --]
> This patch implements the .set_ramp_delay callback to set the ramp_delay on
> hardware for BUCK2/3/4 if ramp_delay is set in regulator constraints.
>
> This patch also do some cleaning work for unrequired members of
> struct max77686_data.
>
> Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
I guess code-clean part may be seperated. Anyway, except that, it looks good.
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
> ---
> drivers/regulator/max77686.c | 37 +++++++++++++++++++++++++++++--------
> 1 files changed, 29 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
> index a29eee3..5c2a32f 100644
> --- a/drivers/regulator/max77686.c
> +++ b/drivers/regulator/max77686.c
> @@ -65,11 +65,34 @@ enum max77686_ramp_rate {
> };
>
> struct max77686_data {
> - struct device *dev;
> - struct max77686_dev *iodev;
> struct regulator_dev **rdev;
> };
>
> +static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
> +{
> + unsigned int ramp_value = RAMP_RATE_NO_CTRL;
> +
> + switch (ramp_delay) {
> + case 1 ... 13750:
> + ramp_value = RAMP_RATE_13P75MV;
> + break;
> + case 13751 ... 27500:
> + ramp_value = RAMP_RATE_27P5MV;
> + break;
> + case 27501 ... 55000:
> + ramp_value = RAMP_RATE_55MV;
> + break;
> + case 55001 ... 100000:
> + break;
> + default:
> + pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
> + rdev->desc->name, ramp_delay);
> + }
> +
> + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
> + MAX77686_RAMP_RATE_MASK, ramp_value << 6);
> +}
> +
> static struct regulator_ops max77686_ops = {
> .list_voltage = regulator_list_voltage_linear,
> .map_voltage = regulator_map_voltage_linear,
> @@ -90,6 +113,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
> .get_voltage_sel = regulator_get_voltage_sel_regmap,
> .set_voltage_sel = regulator_set_voltage_sel_regmap,
> .set_voltage_time_sel = regulator_set_voltage_time_sel,
> + .set_ramp_delay = max77686_set_ramp_delay,
> };
>
> #define regulator_desc_ldo(num) { \
> @@ -238,20 +262,17 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> rdev = max77686->rdev;
> - max77686->dev = &pdev->dev;
> - max77686->iodev = iodev;
> + config.dev = &pdev->dev;
> + config.regmap = iodev->regmap;
> platform_set_drvdata(pdev, max77686);
>
> for (i = 0; i < MAX77686_REGULATORS; i++) {
> - config.dev = max77686->dev;
> - config.regmap = iodev->regmap;
> - config.driver_data = max77686;
> config.init_data = pdata->regulators[i].initdata;
>
> rdev[i] = regulator_register(®ulators[i], &config);
> if (IS_ERR(rdev[i])) {
> ret = PTR_ERR(rdev[i]);
> - dev_err(max77686->dev,
> + dev_err(&pdev->dev,
> "regulator init failed for %d\n", i);
> rdev[i] = NULL;
> goto err;
> --
> 1.7.0.4
>
>
>
>
>
>
>
>
ÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
next reply other threads:[~2012-06-20 6:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-20 6:56 MyungJoo Ham [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-06-20 5:20 [PATCH v2] regulator: max77686: Implement .set_ramp_delay() callback Yadwinder Singh Brar
2012-06-20 7:08 ` Axel Lin
2012-06-20 10:18 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8918866.625501340175384370.JavaMail.weblogic@epml24 \
--to=myungjoo.ham@samsung.com \
--cc=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=jonghwa3.lee@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=woong.byun@samsung.com \
--cc=yadi.brar01@gmail.com \
--cc=yadi.brar@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox