From: Steve Longerbeam <slongerbeam@gmail.com>
To: Peter Seiderer <ps.report@gmx.net>, linux-media@vger.kernel.org
Cc: devel@driverdev.osuosl.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org,
Philipp Zabel <p.zabel@pengutronix.de>,
Steve Longerbeam <slongerbeam@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: Re: [PATCH v4 2/2] media: staging/imx: fill vb2_v4l2_buffer sequence entry
Date: Fri, 16 Mar 2018 10:05:44 -0700 [thread overview]
Message-ID: <892dd00e-83bc-7781-6684-603ff89378cd@gmail.com> (raw)
In-Reply-To: <20180315191323.6028-2-ps.report@gmx.net>
Reviewed-by: Steve Longerbeam <steve_longerbeam@mentor.com>
On 03/15/2018 12:13 PM, Peter Seiderer wrote:
> - enables gstreamer v4l2src lost frame detection, e.g:
>
> 0:00:08.685185668 348 0x54f520 WARN v4l2src gstv4l2src.c:970:gst_v4l2src_create:<v4l2src0> lost frames detected: count = 141 - ts: 0:00:08.330177332
>
> - fixes v4l2-compliance test failure:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> Video Capture:
> Buffer: 0 Sequence: 0 Field: None Timestamp: 92.991450s
> Buffer: 1 Sequence: 0 Field: None Timestamp: 93.008135s
> fail: v4l2-test-buffers.cpp(294): (int)g_sequence() < seq.last_seq + 1
> fail: v4l2-test-buffers.cpp(707): buf.check(q, last_seq)
>
> Signed-off-by: Peter Seiderer <ps.report@gmx.net>
> ---
> Changes in v2:
> - fill vb2_v4l2_buffer sequence entry in imx-ic-prpencvf too
> (suggested by Steve Longerbeam)
>
> Changes in v3:
> - add changelog (suggested by Greg Kroah-Hartman, Fabio Estevam
> and Dan Carpenter) and patch history
> - use u32 (instead of __u32) (suggested by Dan Carpenter)
> - let sequence counter start with zero, keeping v4l2-compliance
> testing happy (needs additional setting of field to a valid
> value, patch will follow soon)
>
> Changes in v4:
> - add v4l2-compliance test failure to changelog
> - reorder frame_sequence increment and assignement to
> avoid -1 as start value (suggeted by Steve Longerbeam)
> ---
> drivers/staging/media/imx/imx-ic-prpencvf.c | 4 ++++
> drivers/staging/media/imx/imx-media-csi.c | 4 ++++
> 2 files changed, 8 insertions(+)
>
> diff --git a/drivers/staging/media/imx/imx-ic-prpencvf.c b/drivers/staging/media/imx/imx-ic-prpencvf.c
> index ffeb017c73b2..28f41caba05d 100644
> --- a/drivers/staging/media/imx/imx-ic-prpencvf.c
> +++ b/drivers/staging/media/imx/imx-ic-prpencvf.c
> @@ -103,6 +103,7 @@ struct prp_priv {
> int nfb4eof_irq;
>
> int stream_count;
> + u32 frame_sequence; /* frame sequence counter */
> bool last_eof; /* waiting for last EOF at stream off */
> bool nfb4eof; /* NFB4EOF encountered during streaming */
> struct completion last_eof_comp;
> @@ -211,12 +212,14 @@ static void prp_vb2_buf_done(struct prp_priv *priv, struct ipuv3_channel *ch)
> done = priv->active_vb2_buf[priv->ipu_buf_num];
> if (done) {
> done->vbuf.field = vdev->fmt.fmt.pix.field;
> + done->vbuf.sequence = priv->frame_sequence;
> vb = &done->vbuf.vb2_buf;
> vb->timestamp = ktime_get_ns();
> vb2_buffer_done(vb, priv->nfb4eof ?
> VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> }
>
> + priv->frame_sequence++;
> priv->nfb4eof = false;
>
> /* get next queued buffer */
> @@ -638,6 +641,7 @@ static int prp_start(struct prp_priv *priv)
>
> /* init EOF completion waitq */
> init_completion(&priv->last_eof_comp);
> + priv->frame_sequence = 0;
> priv->last_eof = false;
> priv->nfb4eof = false;
>
> diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
> index 5f69117b5811..3f2ce05848f3 100644
> --- a/drivers/staging/media/imx/imx-media-csi.c
> +++ b/drivers/staging/media/imx/imx-media-csi.c
> @@ -111,6 +111,7 @@ struct csi_priv {
> struct v4l2_ctrl_handler ctrl_hdlr;
>
> int stream_count; /* streaming counter */
> + u32 frame_sequence; /* frame sequence counter */
> bool last_eof; /* waiting for last EOF at stream off */
> bool nfb4eof; /* NFB4EOF encountered during streaming */
> struct completion last_eof_comp;
> @@ -237,12 +238,14 @@ static void csi_vb2_buf_done(struct csi_priv *priv)
> done = priv->active_vb2_buf[priv->ipu_buf_num];
> if (done) {
> done->vbuf.field = vdev->fmt.fmt.pix.field;
> + done->vbuf.sequence = priv->frame_sequence;
> vb = &done->vbuf.vb2_buf;
> vb->timestamp = ktime_get_ns();
> vb2_buffer_done(vb, priv->nfb4eof ?
> VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> }
>
> + priv->frame_sequence++;
> priv->nfb4eof = false;
>
> /* get next queued buffer */
> @@ -544,6 +547,7 @@ static int csi_idmac_start(struct csi_priv *priv)
>
> /* init EOF completion waitq */
> init_completion(&priv->last_eof_comp);
> + priv->frame_sequence = 0;
> priv->last_eof = false;
> priv->nfb4eof = false;
>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2018-03-16 17:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 19:13 [PATCH v4 1/2] media: staging/imx: fill vb2_v4l2_buffer field entry Peter Seiderer
2018-03-15 19:13 ` [PATCH v4 2/2] media: staging/imx: fill vb2_v4l2_buffer sequence entry Peter Seiderer
2018-03-16 8:12 ` Dan Carpenter
2018-03-16 17:05 ` Steve Longerbeam [this message]
2018-06-11 20:48 ` Peter Seiderer
2018-06-12 8:41 ` Philipp Zabel
2018-06-12 8:59 ` Hans Verkuil
2018-03-16 17:02 ` [PATCH v4 1/2] media: staging/imx: fill vb2_v4l2_buffer field entry Steve Longerbeam
2018-06-11 20:47 ` Peter Seiderer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=892dd00e-83bc-7781-6684-603ff89378cd@gmail.com \
--to=slongerbeam@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=ps.report@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox