public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@kernel.org>
To: Minda Chen <minda.chen@starfivetech.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Pawel Laszczak <pawell@cadence.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Peter Chen <peter.chen@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: Re: [PATCH v1 2/2] usb: cdns3: cdns3-plat: Add clk and reset init
Date: Thu, 4 May 2023 15:45:06 +0300	[thread overview]
Message-ID: <8bedea06-b68e-0f17-87fc-5d1317f315eb@kernel.org> (raw)
In-Reply-To: <20230502081805.112149-3-minda.chen@starfivetech.com>

Hi,

On 02/05/2023 11:18, Minda Chen wrote:
> Add gereric clk and reset init codes to Cadence USBSS
> controller. The codes has been tested by starfive vf2
> board.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> ---
>  drivers/usb/cdns3/cdns3-plat.c | 52 ++++++++++++++++++++++++++++++++++
>  drivers/usb/cdns3/core.h       |  3 ++
>  2 files changed, 55 insertions(+)
> 
> diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c
> index 2bc5d094548b..1820844c74d2 100644
> --- a/drivers/usb/cdns3/cdns3-plat.c
> +++ b/drivers/usb/cdns3/cdns3-plat.c
> @@ -12,11 +12,13 @@
>   *         Roger Quadros <rogerq@ti.com>
>   */
>  
> +#include <linux/clk.h>
>  #include <linux/module.h>
>  #include <linux/irq.h>
>  #include <linux/kernel.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/reset.h>
>  
>  #include "core.h"
>  #include "gadget-export.h"
> @@ -43,6 +45,34 @@ static void set_phy_power_off(struct cdns *cdns)
>  	phy_power_off(cdns->usb2_phy);
>  }
>  
> +static int cdns3_clk_rst_init(struct cdns *cdns)
> +{
> +	int ret;
> +
> +	if (cdns->num_clks) {
> +		ret = clk_bulk_prepare_enable(cdns->num_clks, cdns->clks);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = reset_control_deassert(cdns->resets);
> +	if (ret && cdns->num_clks)
> +		goto err_clk_init;

if (ret)
	goto err_clk_init;

> +
> +	return ret;
> +
> +err_clk_init:
> +	clk_bulk_disable_unprepare(cdns->num_clks, cdns->clks);

if (cdns->num_clks)
	clk_bulk_disable_unprepare(cdns->num_clks, cdns->clks);

This way is more nicer I think.

> +	return ret;
> +}
> +
> +static void cdns3_clk_rst_deinit(struct cdns *cdns)
> +{
> +	reset_control_assert(cdns->resets);
> +	if (cdns->num_clks)
> +		clk_bulk_disable_unprepare(cdns->num_clks, cdns->clks);
> +}
> +
>  /**
>   * cdns3_plat_probe - probe for cdns3 core device
>   * @pdev: Pointer to cdns3 core platform device
> @@ -116,6 +146,16 @@ static int cdns3_plat_probe(struct platform_device *pdev)
>  		cdns->wakeup_irq = 0x0;
>  	}
>  
> +	ret = devm_clk_bulk_get_all(dev, &cdns->clks);
> +	if (ret < 0)
> +		return ret;
> +
> +	cdns->num_clks = ret;
> +
> +	cdns->resets = devm_reset_control_array_get_optional_exclusive(dev);
> +	if (IS_ERR(cdns->resets))
> +		return PTR_ERR(cdns->resets);
> +
>  	cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
>  	if (IS_ERR(cdns->usb2_phy))
>  		return PTR_ERR(cdns->usb2_phy);
> @@ -128,6 +168,10 @@ static int cdns3_plat_probe(struct platform_device *pdev)
>  	if (IS_ERR(cdns->usb3_phy))
>  		return PTR_ERR(cdns->usb3_phy);
>  
> +	ret = cdns3_clk_rst_init(cdns);
> +	if (ret)
> +		return ret;
> +
>  	ret = phy_init(cdns->usb3_phy);
>  	if (ret)
>  		goto err_phy3_init;
> @@ -165,6 +209,7 @@ static int cdns3_plat_probe(struct platform_device *pdev)
>  	phy_exit(cdns->usb3_phy);
>  err_phy3_init:
>  	phy_exit(cdns->usb2_phy);
> +	cdns3_clk_rst_deinit(cdns);
>  
>  	return ret;
>  }
> @@ -187,6 +232,8 @@ static int cdns3_plat_remove(struct platform_device *pdev)
>  	set_phy_power_off(cdns);
>  	phy_exit(cdns->usb2_phy);
>  	phy_exit(cdns->usb3_phy);
> +	cdns3_clk_rst_deinit(cdns);
> +
>  	return 0;
>  }
>  
> @@ -220,6 +267,8 @@ static int cdns3_controller_suspend(struct device *dev, pm_message_t msg)
>  
>  	cdns3_set_platform_suspend(cdns->dev, true, wakeup);
>  	set_phy_power_off(cdns);
> +	if (!PMSG_IS_AUTO(msg))
> +		cdns3_clk_rst_deinit(cdns);

If you reset the controller here all state will be lost.
How is it expected to work on system resume?

>  	spin_lock_irqsave(&cdns->lock, flags);
>  	cdns->in_lpm = true;
>  	spin_unlock_irqrestore(&cdns->lock, flags);
> @@ -237,6 +286,9 @@ static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
>  	if (!cdns->in_lpm)
>  		return 0;
>  
> +	if (!PMSG_IS_AUTO(msg))
> +		cdns3_clk_rst_init(cdns);
> +
>  	if (cdns_power_is_lost(cdns)) {
>  		phy_exit(cdns->usb2_phy);
>  		ret = phy_init(cdns->usb2_phy);
> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
> index 2d332a788871..b894768ee485 100644
> --- a/drivers/usb/cdns3/core.h
> +++ b/drivers/usb/cdns3/core.h
> @@ -111,6 +111,9 @@ struct cdns {
>  	struct mutex			mutex;
>  	enum usb_dr_mode		dr_mode;
>  	struct usb_role_switch		*role_sw;
> +	struct reset_control *resets;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
>  	bool				in_lpm;
>  	bool				wakeup_pending;
>  	struct cdns3_platform_data	*pdata;

cheers,
-roger

  reply	other threads:[~2023-05-04 12:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-02  8:18 [PATCH v1 0/2] Add clock and reset in cdns3 platform Minda Chen
2023-05-02  8:18 ` [PATCH v1 1/2] dt-binding: cdns,usb3: Add clock and reset Minda Chen
2023-05-02 20:08   ` Krzysztof Kozlowski
2023-05-06  1:36     ` Minda Chen
2023-05-02 20:10   ` Krzysztof Kozlowski
2023-05-06  1:34     ` Minda Chen
2023-05-02  8:18 ` [PATCH v1 2/2] usb: cdns3: cdns3-plat: Add clk and reset init Minda Chen
2023-05-04 12:45   ` Roger Quadros [this message]
2023-05-06  1:50     ` Minda Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8bedea06-b68e-0f17-87fc-5d1317f315eb@kernel.org \
    --to=rogerq@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=minda.chen@starfivetech.com \
    --cc=p.zabel@pengutronix.de \
    --cc=pawell@cadence.com \
    --cc=peter.chen@kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox