From: Jiri Slaby <jirislaby@kernel.org>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
linux-serial@vger.kernel.org,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Johan Hovold" <johan@kernel.org>,
"Samuel Iglesias Gonsálvez" <siglesias@igalia.com>,
"Rodolfo Giometti" <giometti@enneenne.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 05/13] serial: Convert uart_{,port_}startup() init_hw param to bool
Date: Wed, 11 Jan 2023 06:53:33 +0100 [thread overview]
Message-ID: <8d3470db-b0c9-017a-fac3-c23239da3413@kernel.org> (raw)
In-Reply-To: <20230110120226.14972-6-ilpo.jarvinen@linux.intel.com>
On 10. 01. 23, 13:02, Ilpo Järvinen wrote:
> Convert init_hw parameter in uart_startup() and uart_port_startup() to
> bool as code treats them like bool.
>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
> ---
> drivers/tty/serial/serial_core.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index c881fefa3d97..f7074ac02801 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -182,7 +182,7 @@ static void uart_port_dtr_rts(struct uart_port *uport, int raise)
> * will be serialised by the per-port mutex.
> */
> static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
> - int init_hw)
> + bool init_hw)
> {
> struct uart_port *uport = uart_port_check(state);
> unsigned long flags;
> @@ -254,7 +254,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
> }
>
> static int uart_startup(struct tty_struct *tty, struct uart_state *state,
> - int init_hw)
> + bool init_hw)
> {
> struct tty_port *port = &state->port;
> int retval;
> @@ -997,7 +997,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
> uart_change_speed(tty, state, NULL);
> }
> } else {
> - retval = uart_startup(tty, state, 1);
> + retval = uart_startup(tty, state, true);
> if (retval == 0)
> tty_port_set_initialized(port, true);
> if (retval > 0)
> @@ -1165,7 +1165,7 @@ static int uart_do_autoconfig(struct tty_struct *tty, struct uart_state *state)
> */
> uport->ops->config_port(uport, flags);
>
> - ret = uart_startup(tty, state, 1);
> + ret = uart_startup(tty, state, true);
> if (ret == 0)
> tty_port_set_initialized(port, true);
> if (ret > 0)
> @@ -1943,7 +1943,7 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)
> /*
> * Start up the serial port.
> */
> - ret = uart_startup(tty, state, 0);
> + ret = uart_startup(tty, state, false);
> if (ret > 0)
> tty_port_set_active(port, true);
>
--
js
suse labs
next prev parent reply other threads:[~2023-01-11 5:53 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-10 12:02 [PATCH v2 00/13] tty/serial: bool conversions and cleanups Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 01/13] tty: Cleanup tty_port_set_initialized() bool parameter Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 02/13] tty: Cleamup tty_port_set_suspended() " Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 03/13] tty: Cleanup tty_port_set_active() " Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 04/13] tty: moxa: Make local var storing tty_port_initialized() bool Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 05/13] serial: Convert uart_{,port_}startup() init_hw param to bool Ilpo Järvinen
2023-01-11 5:53 ` Jiri Slaby [this message]
2023-01-10 12:02 ` [PATCH v2 06/13] tty: Convert ->carrier_raised() and callchains " Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 07/13] tty: Convert ->dtr_rts() to take bool argument Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 08/13] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 09/13] serial: Make uart_handle_cts_change() status param " Ilpo Järvinen
2023-01-11 5:54 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 10/13] tty: Return bool from tty_termios_hw_change() Ilpo Järvinen
2023-01-11 5:55 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 11/13] tty/serial: Call ->dtr_rts() parameter active consistently Ilpo Järvinen
2023-01-11 5:56 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 12/13] tty: moxa: Rename dtr/rts parameters/variables to active Ilpo Järvinen
2023-01-11 5:59 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 13/13] usb/serial: " Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8d3470db-b0c9-017a-fac3-c23239da3413@kernel.org \
--to=jirislaby@kernel.org \
--cc=giometti@enneenne.com \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=siglesias@igalia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox