From: <Tudor.Ambarus@microchip.com>
To: <krzysztof.kozlowski@linaro.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>,
<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<Claudiu.Beznea@microchip.com>, <Lars.Povlsen@microchip.com>,
<Steen.Hegelund@microchip.com>, <UNGLinuxDriver@microchip.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] ARM: dts: at91: align SPI NOR node name with dtschema
Date: Tue, 12 Apr 2022 10:32:34 +0000 [thread overview]
Message-ID: <8eb6621b-78ca-e5f9-def9-47809dab9bb4@microchip.com> (raw)
In-Reply-To: <20220407143223.295344-1-krzysztof.kozlowski@linaro.org>
On 4/7/22 17:32, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> The node names should be generic and SPI NOR dtschema expects "flash".
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> arch/arm/boot/dts/at91-dvk_su60_somc.dtsi | 2 +-
> arch/arm/boot/dts/at91-q5xr5.dts | 2 +-
> arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 2 +-
> arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 2 +-
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 2 +-
> arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 2 +-
> arch/arm/boot/dts/at91-sama5d4ek.dts | 2 +-
> arch/arm/boot/dts/at91-vinco.dts | 2 +-
> arch/arm/boot/dts/at91sam9n12ek.dts | 2 +-
> arch/arm/boot/dts/at91sam9x5ek.dtsi | 2 +-
> arch/arm/boot/dts/sama5d3xmb.dtsi | 2 +-
> arch/arm/boot/dts/sama5d3xmb_cmp.dtsi | 2 +-
> 12 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
> index c1c8650dafce..3542ad8a243e 100644
> --- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
> +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
> @@ -44,7 +44,7 @@ &spi0 {
> status = "okay";
>
> /* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
> - spi-flash@0 {
> + flash@0 {
> compatible = "mxicy,mx25u4035", "jedec,spi-nor";
> spi-max-frequency = <33000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts
> index 47a00062f01f..9cf60b6f695c 100644
> --- a/arch/arm/boot/dts/at91-q5xr5.dts
> +++ b/arch/arm/boot/dts/at91-q5xr5.dts
> @@ -125,7 +125,7 @@ &spi0 {
> cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
> status = "okay";
>
> - m25p80@0 {
> + flash@0 {
> compatible = "jedec,spi-nor";
> spi-max-frequency = <20000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
> index 21c86171e462..ba621783acdb 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
> +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
> @@ -214,7 +214,7 @@ &qspi1 {
> pinctrl-0 = <&pinctrl_qspi1_default>;
> status = "disabled";
>
> - qspi1_flash: spi_flash@0 {
> + qspi1_flash: flash@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "jedec,spi-nor";
> diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> index c145c4e5ef58..5e8755f22784 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> @@ -191,7 +191,7 @@ &pwm0 {
> &qspi1 {
> status = "okay";
>
> - qspi1_flash: spi_flash@0 {
> + qspi1_flash: flash@0 {
> status = "okay";
> };
> };
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index 9bf2ec0ba3e2..cdfe891f9a9e 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -137,7 +137,7 @@ spi0: spi@f8000000 {
> pinctrl-0 = <&pinctrl_spi0_default>;
> status = "okay";
>
> - m25p80@0 {
> + flash@0 {
> compatible = "atmel,at25df321a";
> reg = <0>;
> spi-max-frequency = <50000000>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> index 710cb72bda5a..fd1086f52b40 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> @@ -49,7 +49,7 @@ spi0: spi@f8010000 {
> cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
> status = "okay";
>
> - m25p80@0 {
> + flash@0 {
> compatible = "atmel,at25df321a";
> spi-max-frequency = <50000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index fe432b6b7e95..7017f626f362 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -65,7 +65,7 @@ ssc0: ssc@f8008000 {
> spi0: spi@f8010000 {
> cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
> status = "okay";
> - m25p80@0 {
> + flash@0 {
> compatible = "atmel,at25df321a";
> spi-max-frequency = <50000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
> index a51a3372afa1..ebeaa6ab500e 100644
> --- a/arch/arm/boot/dts/at91-vinco.dts
> +++ b/arch/arm/boot/dts/at91-vinco.dts
> @@ -59,7 +59,7 @@ slot@0 {
> spi0: spi@f8010000 {
> cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
> status = "okay";
> - m25p80@0 {
> + flash@0 {
> compatible = "n25q32b", "jedec,spi-nor";
> spi-max-frequency = <50000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
> index 2bc4e6e0a923..c905d7bfc771 100644
> --- a/arch/arm/boot/dts/at91sam9n12ek.dts
> +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> @@ -119,7 +119,7 @@ pinctrl_usb1_vbus_sense: usb1_vbus_sense {
> spi0: spi@f0000000 {
> status = "okay";
> cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
> - m25p80@0 {
> + flash@0 {
> compatible = "atmel,at25df321a";
> spi-max-frequency = <50000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
> index 6d1264de6060..5f4eaa618ab4 100644
> --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
> @@ -125,7 +125,7 @@ &spi0 {
> cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
> status = "disabled"; /* conflicts with mmc1 */
>
> - m25p80@0 {
> + flash@0 {
> compatible = "atmel,at25df321a";
> spi-max-frequency = <50000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
> index a499de8a7a64..3652c9e24124 100644
> --- a/arch/arm/boot/dts/sama5d3xmb.dtsi
> +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
> @@ -26,7 +26,7 @@ slot@0 {
> spi0: spi@f0004000 {
> dmas = <0>, <0>; /* Do not use DMA for spi0 */
>
> - m25p80@0 {
> + flash@0 {
> compatible = "atmel,at25df321a";
> spi-max-frequency = <50000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
> index fa9e5e2a745d..5d9e97fecf83 100644
> --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
> +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
> @@ -25,7 +25,7 @@ slot@0 {
> spi0: spi@f0004000 {
> dmas = <0>, <0>; /* Do not use DMA for spi0 */
>
> - m25p80@0 {
> + flash@0 {
> compatible = "atmel,at25df321a";
> spi-max-frequency = <50000000>;
> reg = <0>;
> --
> 2.32.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-04-12 11:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 14:32 [PATCH 1/2] ARM: dts: at91: align SPI NOR node name with dtschema Krzysztof Kozlowski
2022-04-07 14:32 ` [PATCH 2/2] arm64: dts: microchip: " Krzysztof Kozlowski
2022-04-12 10:43 ` Tudor.Ambarus
2022-04-20 9:10 ` (subset) " Krzysztof Kozlowski
2022-04-12 10:32 ` Tudor.Ambarus [this message]
2022-04-12 10:41 ` [PATCH 1/2] ARM: dts: at91: " Tudor.Ambarus
2022-04-12 10:43 ` Krzysztof Kozlowski
2022-04-13 9:21 ` Nicolas Ferre
2022-04-13 9:33 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8eb6621b-78ca-e5f9-def9-47809dab9bb4@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=Claudiu.Beznea@microchip.com \
--cc=Lars.Povlsen@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=Steen.Hegelund@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox