Re: [PATCH v8 6/6] leds: mt6360: Add LED driver for MT6360

Jacek Anaszewski
2020-11-25T18:16:36Z

Hi Gene,

Thank you for the update.

On 11/25/20 11:51 AM, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
> 3-channel RGB LED support Register/Flash/Breath Mode, and 1-channel for
> moonlight LED.
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
> drivers/leds/Kconfig | 13 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-mt6360.c | 811 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 825 insertions(+)
> create mode 100644 drivers/leds/leds-mt6360.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 1c181df..4f533bc 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -271,6 +271,19 @@ config LEDS_MT6323
> This option enables support for on-chip LED drivers found on
> Mediatek MT6323 PMIC.
>
> +config LEDS_MT6360
> + tristate "LED Support for Mediatek MT6360 PMIC"
> + depends on LEDS_CLASS && OF
> + depends on LEDS_CLASS_FLASH || !LEDS_CLASS_FLASH
> + depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
> + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
> + depends on MFD_MT6360
> + help
> + This option enables support for dual Flash LED drivers found on
> + Mediatek MT6360 PMIC.
> + Independent current sources supply for each flash LED support torch
> + and strobe mode.

Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

--
Best regards,
Jacek Anaszewski