Re: [PATCH 2/8] iio: magnetometer: ak8975: check if gpiod read was successful

["Nuno Sá" <noname.nuno@gmail.com>]

On Thu, 2026-05-07 at 16:35 +0200, Joshua Crofts via B4 Relay wrote:
> From: Joshua Crofts <joshua.crofts1@gmail.com>
> 
> Add a check that ensures that valid data has been read from GPIOD. If
> not, log an error and return the negative read value.
> 
> Suggested-by: Jonathan Cameron <jic23@kernel.org>
> Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
> ---

Reviewed-by: Nuno Sá <nuno.sa@analog.com>

>  drivers/iio/magnetometer/ak8975.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
> index
> b990c123e2808c2078abcfaf6b2ef86c09393e6b..63b6e8465f5f3873841550a1cd03ce86b95d1d67
> 100644
> --- a/drivers/iio/magnetometer/ak8975.c
> +++ b/drivers/iio/magnetometer/ak8975.c
> @@ -658,6 +658,10 @@ static int wait_conversion_complete_gpio(struct ak8975_data
> *data,
>  				 timeout_ms * USEC_PER_MSEC);
>  	if (ret)
>  		return ret;
> +	if (val < 0) {
> +		dev_err(&client->dev, "Error in reading GPIOD\n");
> +		return val;
> +	}
>  
>  	ret = i2c_smbus_read_byte_data(client, data->def->ctrl_regs[ST1]);
>  	if (ret < 0)