From: Mikulas Patocka <mpatocka@redhat.com>
To: Benjamin Marzinski <bmarzins@redhat.com>
Cc: Yang Yang <yang.yang@vivo.com>, Alasdair Kergon <agk@redhat.com>,
Mike Snitzer <snitzer@kernel.org>,
dm-devel@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH] dm: optimize flushes
Date: Thu, 16 May 2024 22:49:55 +0200 (CEST) [thread overview]
Message-ID: <90f4beb-2e15-3f9-4bc2-0d13872e8ea@redhat.com> (raw)
In-Reply-To: <60bd4b9-8edd-7e22-ce8b-e5d0e43da195@redhat.com>
Device mapper sends flush bios to all the targets and the targets send it
to the underlying device. That may be inefficient, for example if a table
contains 10 linear targets pointing to the same physical device, then
device mapper would send 10 flush bios to that device - despite the fact
that only one bio would be sufficient.
This commit optimizes the flush behavior. It introduces a per-target
variable flush_pass_around - it is set when the target supports flush
optimization - currently, the dm-linear and dm-stripe targets support it.
When all the targets in a table have flush_pass_around, flush_pass_around
on the table is set. __send_empty_flush tests if the table has
flush_pass_around - and if it has, no flush bios are sent to the targets
and the list dm_table->devices is iterated and the flush bios are sent to
each member of the list.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Yang Yang <yang.yang@vivo.com>
---
drivers/md/dm-core.h | 4 ++-
drivers/md/dm-linear.c | 1
drivers/md/dm-stripe.c | 1
drivers/md/dm-table.c | 4 +++
drivers/md/dm.c | 47 +++++++++++++++++++++++++++++-------------
include/linux/device-mapper.h | 5 ++++
6 files changed, 47 insertions(+), 15 deletions(-)
Index: linux-2.6/drivers/md/dm-core.h
===================================================================
--- linux-2.6.orig/drivers/md/dm-core.h 2024-05-15 16:56:49.000000000 +0200
+++ linux-2.6/drivers/md/dm-core.h 2024-05-15 16:56:49.000000000 +0200
@@ -206,7 +206,9 @@ struct dm_table {
bool integrity_supported:1;
bool singleton:1;
- unsigned integrity_added:1;
+ bool integrity_added:1;
+ /* set if all the targets in the table have "flush_pass_around" set */
+ bool flush_pass_around:1;
/*
* Indicates the rw permissions for the new logical device. This
Index: linux-2.6/drivers/md/dm-linear.c
===================================================================
--- linux-2.6.orig/drivers/md/dm-linear.c 2024-05-15 16:56:49.000000000 +0200
+++ linux-2.6/drivers/md/dm-linear.c 2024-05-15 16:56:49.000000000 +0200
@@ -62,6 +62,7 @@ static int linear_ctr(struct dm_target *
ti->num_discard_bios = 1;
ti->num_secure_erase_bios = 1;
ti->num_write_zeroes_bios = 1;
+ ti->flush_pass_around = true;
ti->private = lc;
return 0;
Index: linux-2.6/drivers/md/dm-stripe.c
===================================================================
--- linux-2.6.orig/drivers/md/dm-stripe.c 2024-05-15 16:56:49.000000000 +0200
+++ linux-2.6/drivers/md/dm-stripe.c 2024-05-15 16:56:49.000000000 +0200
@@ -157,6 +157,7 @@ static int stripe_ctr(struct dm_target *
ti->num_discard_bios = stripes;
ti->num_secure_erase_bios = stripes;
ti->num_write_zeroes_bios = stripes;
+ ti->flush_pass_around = true;
sc->chunk_size = chunk_size;
if (chunk_size & (chunk_size - 1))
Index: linux-2.6/drivers/md/dm-table.c
===================================================================
--- linux-2.6.orig/drivers/md/dm-table.c 2024-05-15 16:56:49.000000000 +0200
+++ linux-2.6/drivers/md/dm-table.c 2024-05-15 16:56:49.000000000 +0200
@@ -160,6 +160,7 @@ int dm_table_create(struct dm_table **re
t->type = DM_TYPE_NONE;
t->mode = mode;
t->md = md;
+ t->flush_pass_around = 1;
*result = t;
return 0;
}
@@ -738,6 +739,9 @@ int dm_table_add_target(struct dm_table
if (ti->limit_swap_bios && !static_key_enabled(&swap_bios_enabled.key))
static_branch_enable(&swap_bios_enabled);
+ if (!ti->flush_pass_around)
+ t->flush_pass_around = false;
+
return 0;
bad:
Index: linux-2.6/include/linux/device-mapper.h
===================================================================
--- linux-2.6.orig/include/linux/device-mapper.h 2024-05-15 16:56:49.000000000 +0200
+++ linux-2.6/include/linux/device-mapper.h 2024-05-15 16:56:49.000000000 +0200
@@ -397,6 +397,11 @@ struct dm_target {
* bio_set_dev(). NOTE: ideally a target should _not_ need this.
*/
bool needs_bio_set_dev:1;
+
+ /*
+ * Set if the target supports flush optimization
+ */
+ bool flush_pass_around:1;
};
void *dm_per_bio_data(struct bio *bio, size_t data_size);
Index: linux-2.6/drivers/md/dm.c
===================================================================
--- linux-2.6.orig/drivers/md/dm.c 2024-05-15 16:56:49.000000000 +0200
+++ linux-2.6/drivers/md/dm.c 2024-05-16 20:06:32.000000000 +0200
@@ -645,7 +645,7 @@ static struct bio *alloc_tio(struct clon
/* Set default bdev, but target must bio_set_dev() before issuing IO */
clone->bi_bdev = md->disk->part0;
- if (unlikely(ti->needs_bio_set_dev))
+ if (likely(ti != NULL) && unlikely(ti->needs_bio_set_dev))
bio_set_dev(clone, md->disk->part0);
if (len) {
@@ -1107,7 +1107,7 @@ static void clone_endio(struct bio *bio)
blk_status_t error = bio->bi_status;
struct dm_target_io *tio = clone_to_tio(bio);
struct dm_target *ti = tio->ti;
- dm_endio_fn endio = ti->type->end_io;
+ dm_endio_fn endio = likely(ti != NULL) ? ti->type->end_io : NULL;
struct dm_io *io = tio->io;
struct mapped_device *md = io->md;
@@ -1154,7 +1154,7 @@ static void clone_endio(struct bio *bio)
}
if (static_branch_unlikely(&swap_bios_enabled) &&
- unlikely(swap_bios_limit(ti, bio)))
+ likely(ti != NULL) && unlikely(swap_bios_limit(ti, bio)))
up(&md->swap_bios_semaphore);
free_tio(bio);
@@ -1566,17 +1566,36 @@ static void __send_empty_flush(struct cl
ci->sector_count = 0;
ci->io->tio.clone.bi_iter.bi_size = 0;
- for (unsigned int i = 0; i < t->num_targets; i++) {
- unsigned int bios;
- struct dm_target *ti = dm_table_get_target(t, i);
-
- if (unlikely(ti->num_flush_bios == 0))
- continue;
-
- atomic_add(ti->num_flush_bios, &ci->io->io_count);
- bios = __send_duplicate_bios(ci, ti, ti->num_flush_bios,
- NULL, GFP_NOWAIT);
- atomic_sub(ti->num_flush_bios - bios, &ci->io->io_count);
+ if (!t->flush_pass_around) {
+ for (unsigned int i = 0; i < t->num_targets; i++) {
+ unsigned int bios;
+ struct dm_target *ti = dm_table_get_target(t, i);
+
+ if (unlikely(ti->num_flush_bios == 0))
+ continue;
+
+ atomic_add(ti->num_flush_bios, &ci->io->io_count);
+ bios = __send_duplicate_bios(ci, ti, ti->num_flush_bios,
+ NULL, GFP_NOWAIT);
+ atomic_sub(ti->num_flush_bios - bios, &ci->io->io_count);
+ }
+ } else {
+ /*
+ * Note that there's no need to grab t->devices_lock here
+ * because the targets that support flush pass-around don't
+ * modify the list of devices.
+ */
+ struct list_head *devices = dm_table_get_devices(t);
+ unsigned int len = 0;
+ struct dm_dev_internal *dd;
+ list_for_each_entry(dd, devices, list) {
+ struct bio *clone;
+ clone = alloc_tio(ci, NULL, 0, &len, GFP_NOIO);
+ atomic_add(1, &ci->io->io_count);
+ bio_set_dev(clone, dd->dm_dev->bdev);
+ clone->bi_end_io = clone_endio;
+ dm_submit_bio_remap(clone, NULL);
+ }
}
/*
next prev parent reply other threads:[~2024-05-16 20:50 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-14 9:04 [PATCH 0/5] dm: empty flush optimization Yang Yang
2024-05-14 9:04 ` [PATCH 1/5] dm: introduce flush_pass_around flag Yang Yang
2024-05-14 9:04 ` [PATCH 2/5] dm: add __send_empty_flush_bios() helper Yang Yang
2024-05-14 9:04 ` [PATCH 3/5] dm: support retrieving struct dm_target from struct dm_dev Yang Yang
2024-05-15 15:42 ` Benjamin Marzinski
2024-05-15 15:53 ` Mikulas Patocka
2024-05-16 20:49 ` Mikulas Patocka [this message]
2024-05-17 8:55 ` [PATCH] dm: optimize flushes YangYang
2024-05-22 16:10 ` Mike Snitzer
2024-05-22 21:05 ` Mikulas Patocka
2024-05-23 17:46 ` [PATCH v2] " Mikulas Patocka
2024-05-23 18:02 ` Mike Snitzer
2024-05-28 11:37 ` Mikulas Patocka
2024-05-23 22:17 ` Eric Wheeler
2024-05-15 16:00 ` [PATCH 3/5] dm: support retrieving struct dm_target from struct dm_dev Benjamin Marzinski
2024-05-16 2:12 ` YangYang
2024-05-16 16:39 ` Benjamin Marzinski
2024-05-16 1:55 ` YangYang
2024-05-16 15:29 ` Benjamin Marzinski
2024-05-17 7:48 ` YangYang
2024-05-17 14:33 ` Benjamin Marzinski
2024-05-20 3:12 ` YangYang
2024-05-14 9:04 ` [PATCH 4/5] dm: Avoid sending redundant empty flush bios to the same block device Yang Yang
2024-05-14 9:04 ` [PATCH 5/5] dm linear: enable flush optimization function Yang Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=90f4beb-2e15-3f9-4bc2-0d13872e8ea@redhat.com \
--to=mpatocka@redhat.com \
--cc=agk@redhat.com \
--cc=bmarzins@redhat.com \
--cc=dm-devel@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=snitzer@kernel.org \
--cc=yang.yang@vivo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox