From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261357AbVEQXH1 (ORCPT ); Tue, 17 May 2005 19:07:27 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261448AbVEQXH1 (ORCPT ); Tue, 17 May 2005 19:07:27 -0400 Received: from dvhart.com ([64.146.134.43]:20386 "EHLO localhost.localdomain") by vger.kernel.org with ESMTP id S261357AbVEQXHR (ORCPT ); Tue, 17 May 2005 19:07:17 -0400 Date: Tue, 17 May 2005 16:07:14 -0700 From: "Martin J. Bligh" Reply-To: "Martin J. Bligh" To: linux-kernel Subject: problems with mpt fusion driver since 2.6.12-rc3 Message-ID: <912220000.1116371234@flay> X-Mailer: Mulberry/2.1.2 (Linux/x86) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I get this on boot since -rc3 ... -rc2 worked fine. Is on a 4-way Newisys amd64 box. Is this a known bug, or something new? ^M^@Fusion MPT base driver 3.01.20 ^M^@Copyright (c) 1999-2004 LSI Logic Corporation ^M^@ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 27 (level, low) -> IRQ 27 ^M^@mptbase: Initiating ioc0 bringup ^M^@mptbase: ioc0: ERROR - Wait IOC_READY state timeout(15)! ^M^@mptbase: ioc0: ERROR - Enable Diagnostic mode FAILED! (00h) ^M^@mptbase: ioc0 NOT READY WARNING! ^M^@mptbase: WARNING - ioc0 did not initialize properly! (-1) ^M^@mptbase: probe of 0000:02:04.0 failed with error -1 ^M^@Fusion MPT SCSI Host driver 3.01.20