* Panic on boot (Intel system )
@ 2001-07-25 0:13 Mohanan P G
2001-07-25 11:21 ` Keith Owens
0 siblings, 1 reply; 2+ messages in thread
From: Mohanan P G @ 2001-07-25 0:13 UTC (permalink / raw)
To: linux-kernel
To: linux-kernel@vger.kernel.org
[1.] One line summary of the problem:
The kernel (2.4.6 and 2.4.7) panics while booting.
[2.] Full description of the problem/report:
On this machine , kernel 2.4.6 compiled and used to boot cleanly when Redhat 7.0 was used. Now , after upgrading to a distribution based on Redhat 7.1 , it compiles, but panics while booting (Attempting to kill init!). I have tried it with kernel 2.4.6 and 2.4.7. The problem persists.
I compiled the kernel with egcs
gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)
[3.] Keywords (i.e., modules, networking, kernel):
linux kernel 2.4.6 2.4.7 boot panic failure oops
[4.] Kernel version (from /proc/version):
Currently running:
Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
Tried with 2.4.6 and 2.4.7
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
VFS: Mounted root (ext2 filesystem) readonly
Freeing unused kernel memory: 192k freed
Unable to handle kernel paging request at virtual address ffffff7b
printing eip:
c0119d9f
*pde=00001063
*pte=00000000
Oops=0002
CPU=0
EIP: 0010 [<c0119d9f>]
EFLAGS: 00010002
eax: ffffff7b ebx: 00000004 ecx: ffffff7b edx: c7ff5000
ese: c1255f38 edi: 00000004 ebp: c1254558 esp: c1255eb4
ds: 0018 es: 0018 ss: 0018
Process init (pid:1 stackpage=c1255000)
Stack: c1254000 00000286 00000004 00000000 c0119e6d 00000004 c1255f38 c1254558
c1254000 00000286 00000004 c0119f1c 00000004 c1255f38 c1254000 c1254000
00000286 00000000 00000004 c0119fb9 00000004 c1255f38 c1254000 c1254000
CallTrace: [<c0119e6d>] [<c0119f1c>] [<c0119fb9>] [<c0107244>] [<c01072a3>] [<c012026d>] [<c01202b1>]
[<c0106c4c>]
Code c7 01 00 00 00 00 8b 45 04 89 08 89 4d 04 85 f6 74 07 83 fe
Kernel panic: Attempted to kill init!
----
I used ksymoops
ksymoops -v ../linux/vmlinux -K -L -S -o /lib/modules/2.4.7/ -m /boot/System.map-2.4.7 <oops >oops.out
It gave this output:
ksymoops 2.4.0 on i686 2.4.2-2. Options used
-v ../linux/vmlinux (specified)
-K (specified)
-L (specified)
-o /lib/modules/2.4.7/ (specified)
-m /boot/System.map-2.4.7 (specified)
-S
No modules in ksyms, skipping objects
Unable to handle kernel paging request at virtual address ffffff7b
c0119d9f
EIP: 0010 [<c0119d9f>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010002
eax: ffffff7b ebx: 00000004 ecx: ffffff7b edx: c7ff5000
ds: 0018 es: 0018 ss: 0018
Process init (pid:1 stackpage=c1255000)
Stack: c1254000 00000286 00000004 00000000 c0119e6d 00000004 c1255f38 c1254558
c1254000 00000286 00000004 c0119f1c 00000004 c1255f38 c1254000 c1254000
00000286 00000000 00000004 c0119fb9 00000004 c1255f38 c1254000 c1254000
[<c0106c4c>]
Warning (Oops_read): Code line not seen, dumping what data is available
>>EIP; c0119d9f <send_signal+3f/f0> <=====
1 warning issued. Results may not be reliable.
-----
[6.] A small shell script or example program which triggers the
problem (if possible)
panic on boot. Output given above.
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux vyasa.ccc.krec.ernet.in 2.4.2-2 #1 Sun Apr 8 20:41:30 EDT 2001 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.91.0.2
util-linux 2.10s
mount 2.11b
modutils 2.4.2
e2fsprogs 1.19
reiserfsprogs 3.x.0f
pcmcia-cs 3.1.22
PPP 2.4.0
Linux C Library 2.2.2
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.57
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded 8139too autofs nls_iso8859-1 nls_cp437 vfat fat
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 863.873
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1723.59
[7.3.] Module information (from /proc/modules):
8139too 16480 1
autofs 11264 1 (autoclean)
nls_iso8859-1 2880 1 (autoclean)
nls_cp437 4384 1 (autoclean)
vfat 9392 1 (autoclean)
fat 32672 0 (autoclean) [vfat]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
c000-cfff : PCI Bus #01
c000-c0ff : PCI device 1186:1300 (D-Link System Inc)
c000-c0ff : eth0
d800-d8ff : Intel Corporation 82801AA AC'97 Audio
dc00-dc3f : Intel Corporation 82801AA AC'97 Audio
f000-f00f : Intel Corporation 82801AA IDE
f000-f007 : ide0
f008-f00f : ide1
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07eeffff : System RAM
00100000-002557df : Kernel code
002557e0-0026c80b : Kernel data
07ef0000-07ef2fff : ACPI Non-volatile Storage
07ef3000-07efffff : ACPI Tables
d0000000-d3ffffff : Intel Corporation 82810E CGC [Chipset Graphics Controller]
d4000000-d5ffffff : PCI Bus #01
d5000000-d50000ff : PCI device 1186:1300 (D-Link System Inc)
d5000000-d50000ff : eth0
d6000000-d607ffff : Intel Corporation 82810E CGC [Chipset Graphics Controller]
ffb00000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation 82810E GMCH [Graphics Memory Controller Hub] (rev 03)
Subsystem: Intel Corporation 82810E GMCH [Graphics Memory Controller Hub]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
00:01.0 VGA compatible controller: Intel Corporation 82810E CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
Subsystem: Intel Corporation 82810E CGC [Chipset Graphics Controller]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at d6000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <available only to root>
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corporation 82801AA IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]
00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio (rev 02)
Subsystem: Analog Devices SoundMAX Integrated Digital Audio
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=64]
01:05.0 Ethernet controller: D-Link System Inc DFE-538TX (rev 10)
Subsystem: D-Link System Inc DFE-538TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at d5000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
[7.6.] SCSI information (from /proc/scsi/scsi)
Not applicable
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
None
[X.] Other notes, patches, fixes, workarounds:
None
Thank you
My Machine: Wipro SuperGenius 9100ME (from Wipro, India)
Total Processors: 1
i686 : Processor
vendor_id : GenuineIntel
model name : Pentium III (Coppermine)
cpu MHz : 863.873
cache size : 256 KB
Main Memory Size: 125640 Kbytes
Host:ide0 Channel:hda
ST320413A
Host:ide Channel:hdd
CD-ROM 52X/AKH
Serial Ports: 2
Keyboard Detected: 1
VGA compatible controller: Intel Corporation 82810E CGC [Chipset Graphics Controller] (rev 3).
Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio (rev 2).
Ethernet controller: PCI device 1186:1300 (D-Link System Inc) (rev 16).
(D-Link DFE-538TX)
I am using a linux distribution based on Redhat Linux 7.1 given by the
PCQuest magazine (www.pcquest.com) , India
Submitted by
P G Mohanan, Systems Manager, CCC
KREC Surathkal , Srinivasnagar PO
DK,Karnataka , India PIN 574 157
Email: pgm@krec.ernet.in
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Panic on boot (Intel system )
2001-07-25 0:13 Panic on boot (Intel system ) Mohanan P G
@ 2001-07-25 11:21 ` Keith Owens
0 siblings, 0 replies; 2+ messages in thread
From: Keith Owens @ 2001-07-25 11:21 UTC (permalink / raw)
To: Mohanan P G; +Cc: linux-kernel
On Wed, 25 Jul 2001 05:43:18 +0530 (IST),
Mohanan P G <pgm@krec.ernet.in> wrote:
>Stack: c1254000 00000286 00000004 00000000 c0119e6d 00000004 c1255f38 c1254558
> c1254000 00000286 00000004 c0119f1c 00000004 c1255f38 c1254000 c1254000
> 00000286 00000000 00000004 c0119fb9 00000004 c1255f38 c1254000 c1254000
>CallTrace: [<c0119e6d>] [<c0119f1c>] [<c0119fb9>] [<c0107244>] [<c01072a3>] [<c012026d>] [<c01202b1>]
>[<c0106c4c>]
>Code c7 01 00 00 00 00 8b 45 04 89 08 89 4d 04 85 f6 74 07 83 fe
>Stack: c1254000 00000286 00000004 00000000 c0119e6d 00000004 c1255f38 c1254558
> c1254000 00000286 00000004 c0119f1c 00000004 c1255f38 c1254000 c1254000
> 00000286 00000000 00000004 c0119fb9 00000004 c1255f38 c1254000 c1254000
>[<c0106c4c>]
>Warning (Oops_read): Code line not seen, dumping what data is available
Your oops text is not in quite the right format. ksymoops looks for
'Call Trace:' (space between Call and Trace:) and 'Code:' (: after
Code). If you adjust your text to match what the kernel actually
produced then rerun ksymoops you will get a better oops report. Please
send the clean oops report to linux-kernel, not to me.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-07-25 11:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-07-25 0:13 Panic on boot (Intel system ) Mohanan P G
2001-07-25 11:21 ` Keith Owens
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox