public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Binbin Wu <binbin.wu@linux.intel.com>
To: Sagi Shahar <sagis@google.com>
Cc: linux-kselftest@vger.kernel.org,
	Paolo Bonzini <pbonzini@redhat.com>,
	Shuah Khan <shuah@kernel.org>,
	Sean Christopherson <seanjc@google.com>,
	Ackerley Tng <ackerleytng@google.com>,
	Ryan Afranji <afranji@google.com>,
	Andrew Jones <ajones@ventanamicro.com>,
	Isaku Yamahata <isaku.yamahata@intel.com>,
	Erdem Aktas <erdemaktas@google.com>,
	Rick Edgecombe <rick.p.edgecombe@intel.com>,
	Roger Wang <runanwang@google.com>,
	Oliver Upton <oliver.upton@linux.dev>,
	"Pratik R. Sampat" <pratikrajesh.sampat@amd.com>,
	Reinette Chatre <reinette.chatre@intel.com>,
	Ira Weiny <ira.weiny@intel.com>, Chao Gao <chao.gao@intel.com>,
	Chenyi Qiang <chenyi.qiang@intel.com>,
	linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: Re: [PATCH v10 08/21] KVM: selftests: Add TDX boot code
Date: Mon, 8 Sep 2025 15:33:05 +0800	[thread overview]
Message-ID: <9232bfac-e3a3-49a1-a956-31e13e3ef6bf@linux.intel.com> (raw)
In-Reply-To: <20250904065453.639610-9-sagis@google.com>



On 9/4/2025 2:54 PM, Sagi Shahar wrote:
> From: Erdem Aktas <erdemaktas@google.com>
>
> Add code to boot a TDX test VM. Since TDX registers are inaccesible to

inaccesible -> inaccessible

> KVM, the boot code loads the relevant values from memory into the
> registers before jumping to the guest code.
>
> Signed-off-by: Erdem Aktas <erdemaktas@google.com>
> Co-developed-by: Ackerley Tng <ackerleytng@google.com>
> Signed-off-by: Ackerley Tng <ackerleytng@google.com>
> Co-developed-by: Sagi Shahar <sagis@google.com>
> Signed-off-by: Sagi Shahar <sagis@google.com>

Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>

> ---
>   tools/testing/selftests/kvm/Makefile.kvm      |  3 +
>   .../selftests/kvm/include/x86/tdx/td_boot.h   |  5 ++
>   .../kvm/include/x86/tdx/td_boot_asm.h         | 16 +++++
>   .../selftests/kvm/lib/x86/tdx/td_boot.S       | 60 +++++++++++++++++++
>   4 files changed, 84 insertions(+)
>   create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot_asm.h
>   create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/td_boot.S
>
> diff --git a/tools/testing/selftests/kvm/Makefile.kvm b/tools/testing/selftests/kvm/Makefile.kvm
> index 3f93c093b046..d11d02e17cc5 100644
> --- a/tools/testing/selftests/kvm/Makefile.kvm
> +++ b/tools/testing/selftests/kvm/Makefile.kvm
> @@ -31,6 +31,7 @@ LIBKVM_x86 += lib/x86/sev.c
>   LIBKVM_x86 += lib/x86/svm.c
>   LIBKVM_x86 += lib/x86/ucall.c
>   LIBKVM_x86 += lib/x86/vmx.c
> +LIBKVM_x86 += lib/x86/tdx/td_boot.S
>   
>   LIBKVM_arm64 += lib/arm64/gic.c
>   LIBKVM_arm64 += lib/arm64/gic_v3.c
> @@ -336,6 +337,8 @@ $(LIBKVM_ASM_DEFS_OBJ): $(OUTPUT)/%.s: %.c FORCE
>   $(LIBKVM_STRING_OBJ): $(OUTPUT)/%.o: %.c
>   	$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c -ffreestanding $< -o $@
>   
> +$(OUTPUT)/lib/x86/tdx/td_boot.o: $(OUTPUT)/include/x86/tdx/td_boot_offsets.h
> +
>   $(OUTPUT)/include/x86/tdx/td_boot_offsets.h: $(OUTPUT)/lib/x86/tdx/td_boot_offsets.s FORCE
>   	$(call filechk,offsets,__TDX_BOOT_OFFSETS_H__)
>   
> diff --git a/tools/testing/selftests/kvm/include/x86/tdx/td_boot.h b/tools/testing/selftests/kvm/include/x86/tdx/td_boot.h
> index 8eda3ce10220..17c3083da9ca 100644
> --- a/tools/testing/selftests/kvm/include/x86/tdx/td_boot.h
> +++ b/tools/testing/selftests/kvm/include/x86/tdx/td_boot.h
> @@ -66,4 +66,9 @@ struct td_boot_parameters {
>   	struct td_per_vcpu_parameters per_vcpu[];
>   };
>   
> +void td_boot(void);
> +void td_boot_code_end(void);
> +
> +#define TD_BOOT_CODE_SIZE (td_boot_code_end - td_boot)
> +
>   #endif /* SELFTEST_TDX_TD_BOOT_H */
> diff --git a/tools/testing/selftests/kvm/include/x86/tdx/td_boot_asm.h b/tools/testing/selftests/kvm/include/x86/tdx/td_boot_asm.h
> new file mode 100644
> index 000000000000..10b4b527595c
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/include/x86/tdx/td_boot_asm.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef SELFTEST_TDX_TD_BOOT_ASM_H
> +#define SELFTEST_TDX_TD_BOOT_ASM_H
> +
> +/*
> + * GPA where TD boot parameters will be loaded.
> + *
> + * TD_BOOT_PARAMETERS_GPA is arbitrarily chosen to
> + *
> + * + be within the 4GB address space
> + * + provide enough contiguous memory for the struct td_boot_parameters such
> + *   that there is one struct td_per_vcpu_parameters for KVM_MAX_VCPUS
> + */
> +#define TD_BOOT_PARAMETERS_GPA 0xffff0000
> +
> +#endif  // SELFTEST_TDX_TD_BOOT_ASM_H
> diff --git a/tools/testing/selftests/kvm/lib/x86/tdx/td_boot.S b/tools/testing/selftests/kvm/lib/x86/tdx/td_boot.S
> new file mode 100644
> index 000000000000..7aa33caa9a78
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/lib/x86/tdx/td_boot.S
> @@ -0,0 +1,60 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#include "tdx/td_boot_asm.h"
> +#include "tdx/td_boot_offsets.h"
> +#include "processor_asm.h"
> +
> +.code32
> +
> +.globl td_boot
> +td_boot:
> +	/* In this procedure, edi is used as a temporary register. */
> +	cli
> +
> +	/* Paging is off. */
> +
> +	movl $TD_BOOT_PARAMETERS_GPA, %ebx
> +
> +	/*
> +	 * Find the address of struct td_per_vcpu_parameters for this
> +	 * vCPU based on esi (TDX spec: initialized with vCPU id). Put
> +	 * struct address into register for indirect addressing.
> +	 */
> +	movl $SIZEOF_TD_PER_VCPU_PARAMETERS, %eax
> +	mul %esi
> +	leal TD_BOOT_PARAMETERS_PER_VCPU(%ebx), %edi
> +	addl %edi, %eax
> +
> +	/* Setup stack. */
> +	movl TD_PER_VCPU_PARAMETERS_ESP_GVA(%eax), %esp
> +
> +	/* Setup GDT. */
> +	leal TD_BOOT_PARAMETERS_GDT(%ebx), %edi
> +	lgdt (%edi)
> +
> +	/* Setup IDT. */
> +	leal TD_BOOT_PARAMETERS_IDT(%ebx), %edi
> +	lidt (%edi)
> +
> +	/*
> +	 * Set up control registers (There are no instructions to mov from
> +	 * memory to control registers, hence use edi as a scratch register).
> +	 */
> +	movl TD_BOOT_PARAMETERS_CR4(%ebx), %edi
> +	movl %edi, %cr4
> +	movl TD_BOOT_PARAMETERS_CR3(%ebx), %edi
> +	movl %edi, %cr3
> +	movl TD_BOOT_PARAMETERS_CR0(%ebx), %edi
> +	movl %edi, %cr0
> +
> +	/* Switching to 64bit mode after ljmp and then jump to guest code */
> +	ljmp $(KERNEL_CS),$1f
> +1:
> +	jmp *TD_PER_VCPU_PARAMETERS_GUEST_CODE(%eax)
> +
> +/* Leave marker so size of td_boot code can be computed. */
> +.globl td_boot_code_end
> +td_boot_code_end:
> +
> +/* Disable executable stack. */
> +.section .note.GNU-stack,"",%progbits


  reply	other threads:[~2025-09-08  7:33 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-04  6:54 [PATCH v10 00/21] TDX KVM selftests Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 01/21] KVM: selftests: Allocate pgd in virt_map() as necessary Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 02/21] KVM: selftests: Expose functions to get default sregs values Sagi Shahar
2025-09-04  9:23   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 03/21] KVM: selftests: Expose function to allocate guest vCPU stack Sagi Shahar
2025-09-04  9:27   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 04/21] KVM: selftests: Update kvm_init_vm_address_properties() for TDX Sagi Shahar
2025-09-05  5:19   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 05/21] KVM: selftests: Expose segment definitons to assembly files Sagi Shahar
2025-09-05  5:24   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 06/21] KVM: selftests: Add kbuild definitons Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 07/21] KVM: selftests: Define structs to pass parameters to TDX boot code Sagi Shahar
2025-09-08  7:19   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 08/21] KVM: selftests: Add " Sagi Shahar
2025-09-08  7:33   ` Binbin Wu [this message]
2025-09-04  6:54 ` [PATCH v10 09/21] KVM: selftests: Set up TDX boot code region Sagi Shahar
2025-09-08  7:39   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 10/21] KVM: selftests: Set up TDX boot parameters region Sagi Shahar
2025-09-08  8:07   ` Binbin Wu
2025-09-25 17:13     ` Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 11/21] KVM: selftests: Add helper to initialize TDX VM Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 12/21] KVM: selftests: TDX: Use KVM_TDX_CAPABILITIES to validate TDs' attribute configuration Sagi Shahar
2025-09-08  9:22   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 13/21] KVM: selftests: Add helpers to init TDX memory and finalize VM Sagi Shahar
2025-09-10  6:49   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 14/21] KVM: selftests: Call TDX init when creating a new TDX vm Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 15/21] KVM: selftests: Setup memory regions for TDX on vm creation Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 16/21] KVM: selftests: Call KVM_TDX_INIT_VCPU when creating a new TDX vcpu Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 17/21] KVM: selftests: Set entry point for TDX guest code Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 18/21] KVM: selftests: Add support for TDX TDCALL from guest Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 19/21] KVM: selftests: Add wrapper for TDX MMIO " Sagi Shahar
2025-09-04  6:54 ` [PATCH v10 20/21] KVM: selftests: Add ucall support for TDX Sagi Shahar
2025-09-10  7:46   ` Binbin Wu
2025-09-04  6:54 ` [PATCH v10 21/21] KVM: selftests: Add TDX lifecycle test Sagi Shahar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9232bfac-e3a3-49a1-a956-31e13e3ef6bf@linux.intel.com \
    --to=binbin.wu@linux.intel.com \
    --cc=ackerleytng@google.com \
    --cc=afranji@google.com \
    --cc=ajones@ventanamicro.com \
    --cc=chao.gao@intel.com \
    --cc=chenyi.qiang@intel.com \
    --cc=erdemaktas@google.com \
    --cc=ira.weiny@intel.com \
    --cc=isaku.yamahata@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=pbonzini@redhat.com \
    --cc=pratikrajesh.sampat@amd.com \
    --cc=reinette.chatre@intel.com \
    --cc=rick.p.edgecombe@intel.com \
    --cc=runanwang@google.com \
    --cc=sagis@google.com \
    --cc=seanjc@google.com \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox