Re: [19.666764] Disabling IRQ #23

["Justin P. Mattock" <justinmattock@gmail.com>]

The only proprietary modules
Atheros and Fglrx. Which confuses me, due to the message giving
Info on USB. As for the login,
On a MacBook I need uhci
To use the keyboard. When this
Goes off I can type, but results
In the letter duplicating itself I.g.
Typing the letter * results in **
As for using ssh, no.
I guess as a workaround I can try and change my login name and password
With double letters so I can grab a copy of dmesg

justin P. Mattock



On Sep 9, 2008, at 4:28 PM, Chris Snook <csnook@redhat.com> wrote:

> Justin Mattock wrote:
>> I've been noticing this message appear
>> every "X" amount of boot's(maybe ten or so);
>> [19.656768] irq 23: nobody cared (try booting with the "irqpoll"  
>> option)
>> [19.666039] Pid: 0, comm: swapper Tainted: P          2.6.27- 
>> rc5-00363-ga002d93
>> [19.666764]  [<c0151774>] __report_bad_irq+0x2e/0x6f
>> [19.666764]  [<c015199b>] note_interrupt+0x1e6/0x217
>> [19.666764]  [<c0150d73>] ? handle_IRQ_event+0x2a/0x5a
>> [19.666764]  [<c0151f4c>] handle_fastoei_irq+0x91/0xb6
>> [19.666764]  [<c0104ff2>] do_IRQ+ox6c/0x86
>> [19.666764]  [<c0103a6f>] common_interrupt+0x23/0x28
>> [19.666764]  [<f886099a>] ? acpi_idle_enter_simple+0x19c/0x20e  
>> [processor]
>> [19.666764]  [<c02ec323>] cpuidle_idle_call+ox5e/0x8b
>> [19.666764]  [<c0101d42>] cpu_idle+0xda/0xfa
>> [19.666764]  [<c038fde6>] rest_init+0x4e/0x50
>> [19.666764]  =======================
>> [19.666764] handlers:
>> [19.666764] [<c02cca2b>] (usb_hcd_irq+0x0/0x79)
>> [19.666764] [<c02cca2b>] (usb_hcd_irq+0x0/0x79)
>> [19.666764] Disabling IRQ #23
>> normally upon booting leaving me unable
>> to login.
>
> What's the proprietary module that's tainting it?  Ideally we'd like  
> to see it reproduced on an untainted kernel, but depending on what  
> it is, it may not matter.
>
> When you say you're not able to log in, is that because the keyboard  
> is unresponsive?  It appears to be affecting USB, so I'd be curious  
> to know if you can ssh into the box, or log in with a PS/2  
> keyboard.  Of course, some PS/2 ports are connected via USB under  
> the hood, so the keyboard might not tell us much.
>
> -- Chris