From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Linus Walleij <linus.walleij@linaro.org>,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: Re: [PATCH 4/8] drivers/pinctrl: make sh-pfc/core.c explicitly non-modular
Date: Tue, 01 Mar 2016 00:00:36 +0200 [thread overview]
Message-ID: <9340534.3KnKPiL8cc@avalon> (raw)
In-Reply-To: <1456778924-20730-5-git-send-email-paul.gortmaker@windriver.com>
Hi Paul,
Thank you for the patch.
On Monday 29 February 2016 15:48:40 Paul Gortmaker wrote:
> The Kconfig / Makefile currently controlling compilation of this code is:
>
> drivers/pinctrl/sh-pfc/Makefile:obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc.o
> drivers/pinctrl/sh-pfc/Makefile:sh-pfc-objs = core.o
> pinctrl.o
>
> drivers/pinctrl/sh-pfc/Kconfig:config PINCTRL_SH_PFC
> drivers/pinctrl/sh-pfc/Kconfig: def_bool y
>
> ...meaning that it currently is not being built as a module by anyone.
>
> Lets remove the modular code that is essentially orphaned, so that
> when reading the driver there is no doubt it is builtin-only.
>
> Since module_init already wasn't being used in this code, the init
> ordering remains unchanged with this commit.
>
> Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
>
> We also delete the MODULE_LICENSE tag etc. since all that information
> was (or is now) contained at the top of the file in the comments.
>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/pinctrl/sh-pfc/core.c | 18 ++++--------------
> 1 file changed, 4 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
> index 181ea98a63b7..3f3f904e458b 100644
> --- a/drivers/pinctrl/sh-pfc/core.c
> +++ b/drivers/pinctrl/sh-pfc/core.c
> @@ -1,5 +1,7 @@
> /*
> - * SuperH Pin Function Controller support.
> + * Pin Control and GPIO driver for SuperH Pin Function Controller.
> + *
> + * Authors: Magnus Damm, Paul Mundt, Laurent Pinchart
> *
> * Copyright (C) 2008 Magnus Damm
> * Copyright (C) 2009 - 2012 Paul Mundt
> @@ -17,7 +19,7 @@
> #include <linux/io.h>
> #include <linux/ioport.h>
> #include <linux/kernel.h>
> -#include <linux/module.h>
> +#include <linux/init.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> #include <linux/pinctrl/machine.h>
> @@ -503,7 +505,6 @@ static const struct of_device_id sh_pfc_of_table[] = {
> #endif
> { },
> };
> -MODULE_DEVICE_TABLE(of, sh_pfc_of_table);
> #endif
>
> static int sh_pfc_probe(struct platform_device *pdev)
> @@ -632,7 +633,6 @@ static const struct platform_device_id sh_pfc_id_table[]
> = { { "sh-pfc", 0 },
> { },
> };
> -MODULE_DEVICE_TABLE(platform, sh_pfc_id_table);
>
> static struct platform_driver sh_pfc_driver = {
> .probe = sh_pfc_probe,
> @@ -649,13 +649,3 @@ static int __init sh_pfc_init(void)
> return platform_driver_register(&sh_pfc_driver);
> }
> postcore_initcall(sh_pfc_init);
> -
> -static void __exit sh_pfc_exit(void)
> -{
> - platform_driver_unregister(&sh_pfc_driver);
> -}
> -module_exit(sh_pfc_exit);
> -
> -MODULE_AUTHOR("Magnus Damm, Paul Mundt, Laurent Pinchart");
> -MODULE_DESCRIPTION("Pin Control and GPIO driver for SuperH pin function
> controller"); -MODULE_LICENSE("GPL v2");
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2016-02-29 22:00 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-29 20:48 [PATCH 0/8] drivers/pinctrl: remove truly orphaned module code Paul Gortmaker
2016-02-29 20:48 ` [PATCH 1/8] drivers/pinctrl: sunxi/pinctrl-sunxi.c does not need module.h Paul Gortmaker
2016-03-01 7:13 ` Maxime Ripard
2016-03-09 2:59 ` Linus Walleij
2016-02-29 20:48 ` [PATCH 2/8] drivers/pinctrl: make mediatek/pinctrl-mt6397 driver explicitly non-modular Paul Gortmaker
2016-03-01 20:02 ` Hongzhou Yang
2016-03-09 3:01 ` Linus Walleij
2016-02-29 20:48 ` [PATCH 3/8] drivers/pinctrl: make meson/pinctrl-meson.c " Paul Gortmaker
2016-03-09 3:04 ` Linus Walleij
2016-02-29 20:48 ` [PATCH 4/8] drivers/pinctrl: make sh-pfc/core.c " Paul Gortmaker
2016-02-29 22:00 ` Laurent Pinchart [this message]
2016-03-02 11:05 ` Geert Uytterhoeven
2016-03-09 3:24 ` Linus Walleij
2016-02-29 20:48 ` [PATCH 5/8] drivers/pinctrl: make stm32/pinctrl-stm32f429.c " Paul Gortmaker
2016-03-01 9:01 ` Maxime Coquelin
2016-03-09 3:25 ` Linus Walleij
2016-02-29 20:48 ` [PATCH 6/8] drivers/pinctrl: make sunxi/pinctrl-sun[4-9]* " Paul Gortmaker
2016-03-01 7:14 ` Maxime Ripard
2016-02-29 20:48 ` [PATCH 7/8] drivers/pinctrl: make sunxi/pinctrl-sun9i-a80-r.c " Paul Gortmaker
2016-03-01 7:14 ` Maxime Ripard
2016-03-09 3:28 ` Linus Walleij
2016-02-29 20:48 ` [PATCH 8/8] drivers/pinctrl: clean up samsung modular vs. non-modular distinctions Paul Gortmaker
2016-03-15 8:50 ` Linus Walleij
2016-03-15 13:20 ` Paul Gortmaker
2016-03-15 10:10 ` Sylwester Nawrocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9340534.3KnKPiL8cc@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=geert+renesas@glider.be \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=paul.gortmaker@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).