From: dth@lin-gen.com (Danny ter Haar)
To: linux-kernel@vger.kernel.org
Subject: Re: PRoblem with pcnet32 under 2.4.0 , was :Drivers under 2.4
Date: Fri, 12 Jan 2001 12:16:05 +0000 (UTC) [thread overview]
Message-ID: <93msi4$s1v$1@voyager.cistron.net> (raw)
In-Reply-To: <20010112125010.A6371@lin-gen.com> <Pine.LNX.4.30.0101121357370.707-100000@prime.sun.ac.za>
Hans Grobler <grobh@sun.ac.za> wrote:
>> lspci -vx output:
>What about the other devices?
ok, here's the full listing :
00:00.0 Host bridge: Cyrix Corporation PCI Master
Flags: bus master, medium devsel, latency 0
00: 78 10 01 00 07 00 80 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0e.0 VGA compatible controller: Intergraphics Systems CyberPro 5000 (rev 02)
(prog-if 00 [VGA])
Subsystem: Unknown device 0280:7000
Flags: medium devsel, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled] [size=64K]
00: ea 10 00 50 03 00 00 02 02 00 00 03 04 40 00 00
10: 00 00 00 fd 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 80 02 00 70
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
00:0f.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] (
rev 42)
Subsystem: Advanced Micro Devices [AMD]: Unknown device 2000
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at fce0 [size=32]
Memory at fedffc00 (32-bit, non-prefetchable) [size=32]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [40] Power Management version 1
00: 22 10 00 20 07 00 90 02 42 00 00 02 00 40 00 00
10: e1 fc 00 00 00 fc df fe 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 00 20
30: 00 00 00 00 40 00 00 00 00 00 00 00 09 01 18 18
00:12.1 Bridge: Cyrix Corporation 5530 SMI [Kahlua]
Flags: medium devsel
Memory at 40012000 (32-bit, non-prefetchable) [size=256]
00: 78 10 01 01 02 00 80 02 00 00 80 06 00 00 00 00
10: 00 20 01 40 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.2 IDE interface: Cyrix Corporation 5530 IDE [Kahlua] (prog-if 00 [])
Flags: medium devsel
I/O ports at fc00 [size=16]
00: 78 10 02 01 01 00 80 02 00 00 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.3 Multimedia audio controller: Cyrix Corporation 5530 Audio [Kahlua]
Flags: bus master, medium devsel, latency 0
Memory at 40011000 (32-bit, non-prefetchable) [size=128]
00: 78 10 03 01 06 00 80 02 00 00 01 04 00 00 00 00
10: 00 10 01 40 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.0 USB Controller: Compaq Computer Corporation: Unknown device a0f8 (rev 06
) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation: Unknown device a0f8
Flags: medium devsel, IRQ 10
Memory at fedfe000 (32-bit, non-prefetchable) [size=4K]
00: 11 0e f8 a0 13 00 80 02 06 10 03 0c 00 40 00 00
10: 00 e0 df fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e f8 a0
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 50
00:14.0 Multimedia video controller: Zoran Corporation ZR36120 (rev 03)
Subsystem: Optibase Ltd: Unknown device 5000
Flags: fast devsel, IRQ 10
Memory at fedfd000 (32-bit, non-prefetchable) [size=4K]
00: de 11 20 61 02 00 00 00 03 00 00 04 00 40 00 00
10: 00 d0 df fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 55 12 00 50
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 02 10
The last one is an plugin pci mpeg2 decoder (which is optional)
>> irq 0: 16840 timer irq 9: 0 acpi, PCnet/FAST III
>
>Ok, this may not mean much, but have you tried compiling without acpi?
>Just to remove some variables...
yesterdays trials were with 2.4.0-ac4 which did not include acpi.
Wil re-compile (slow!! :) wihout acpi and re-try.
Danny
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-01-12 12:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-09 9:12 Failure building 2.4 while running 2.4. Success in building 2.4 while running 2.2 Silviu Marin-Caea
2001-01-09 10:17 ` Alessandro Suardi
2001-01-09 10:33 ` Failure building 2.4 while running 2.4. Success in building 2.4 Alan Cox
2001-01-09 18:20 ` Failure building 2.4 while running 2.4. There is no such thing Silviu Marin-Caea
2001-01-09 18:43 ` Alan Cox
2001-01-09 19:57 ` Drivers under 2.4 Dennis
2001-01-09 20:13 ` suser checks in 2.2.x Bosko Radivojevic
2001-01-09 18:39 ` Arnaldo Carvalho de Melo
2001-01-10 18:22 ` Drivers under 2.4 Dennis
2001-01-10 20:01 ` Hans Grobler
2001-01-10 21:37 ` Dennis
2001-01-10 21:38 ` Andi Kleen
2001-01-10 22:08 ` Hans Grobler
2001-01-11 10:24 ` Danny ter Haar
2001-01-11 10:31 ` Andi Kleen
2001-01-11 10:58 ` Danny ter Haar
2001-01-11 11:36 ` Andrew Morton
2001-01-11 11:58 ` Danny ter Haar
2001-01-11 14:00 ` Danny ter Haar
2001-01-11 14:32 ` Jeff Garzik
2001-01-11 16:33 ` Danny ter Haar
2001-01-11 16:44 ` Hans Grobler
2001-01-12 11:50 ` PRoblem with pcnet32 under 2.4.0 , was :Drivers " Danny ter Haar
2001-01-12 12:01 ` Hans Grobler
2001-01-12 12:16 ` Danny ter Haar [this message]
2001-01-12 22:33 ` Thomas Bogendoerfer
2001-01-15 16:29 ` Danny ter Haar
2001-01-11 12:56 ` Drivers " Alan Cox
2001-01-09 10:28 ` Failure building 2.4 while running 2.4. Success in building 2.4 while running 2.2 Alan Cox
2001-01-09 16:10 ` [rlug] " Eugen
2001-01-09 19:01 ` J Sloan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='93msi4$s1v$1@voyager.cistron.net' \
--to=dth@lin-gen.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox